Copyright 1986-2018 Xilinx, Inc. All Rights Reserved. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | Tool Version : Vivado v.2018.3 (lin64) Build 2405991 Thu Dec 6 23:36:41 MST 2018 | Date : Fri Apr 12 18:07:08 2019 | Host : WOPR running 64-bit unknown | Command : report_timing_summary -max_paths 10 -file CLA_4bits_timing_summary_routed.rpt -pb CLA_4bits_timing_summary_routed.pb -rpx CLA_4bits_timing_summary_routed.rpx -warn_on_violation | Design : CLA_4bits | Device : 7a35t-cpg236 | Speed File : -1 PRODUCTION 1.23 2018-06-13 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Timing Summary Report ------------------------------------------------------------------------------------------------ | Timer Settings | -------------- ------------------------------------------------------------------------------------------------ Enable Multi Corner Analysis : Yes Enable Pessimism Removal : Yes Pessimism Removal Resolution : Nearest Common Node Enable Input Delay Default Clock : No Enable Preset / Clear Arcs : No Disable Flight Delays : No Ignore I/O Paths : No Timing Early Launch at Borrowing Latches : false Corner Analyze Analyze Name Max Paths Min Paths ------ --------- --------- Slow Yes Yes Fast Yes Yes check_timing report Table of Contents ----------------- 1. checking no_clock 2. checking constant_clock 3. checking pulse_width_clock 4. checking unconstrained_internal_endpoints 5. checking no_input_delay 6. checking no_output_delay 7. checking multiple_clock 8. checking generated_clocks 9. checking loops 10. checking partial_input_delay 11. checking partial_output_delay 12. checking latch_loops 1. checking no_clock -------------------- There are 0 register/latch pins with no clock. 2. checking constant_clock -------------------------- There are 0 register/latch pins with constant_clock. 3. checking pulse_width_clock ----------------------------- There are 0 register/latch pins which need pulse_width check 4. checking unconstrained_internal_endpoints -------------------------------------------- There are 0 pins that are not constrained for maximum delay. There are 0 pins that are not constrained for maximum delay due to constant clock. 5. checking no_input_delay -------------------------- There are 10 input ports with no input delay specified. (HIGH) There are 0 input ports with no input delay but user has a false path constraint. 6. checking no_output_delay --------------------------- There are 5 ports with no output delay specified. (HIGH) There are 0 ports with no output delay but user has a false path constraint There are 0 ports with no output delay but with a timing clock defined on it or propagating through it 7. checking multiple_clock -------------------------- There are 0 register/latch pins with multiple clocks. 8. checking generated_clocks ---------------------------- There are 0 generated clocks that are not connected to a clock source. 9. checking loops ----------------- There are 0 combinational loops in the design. 10. checking partial_input_delay -------------------------------- There are 0 input ports with partial input delay specified. 11. checking partial_output_delay --------------------------------- There are 0 ports with partial output delay specified. 12. checking latch_loops ------------------------ There are 0 combinational latch loops in the design through latch input ------------------------------------------------------------------------------------------------ | Design Timing Summary | --------------------- ------------------------------------------------------------------------------------------------ WNS(ns) TNS(ns) TNS Failing Endpoints TNS Total Endpoints WHS(ns) THS(ns) THS Failing Endpoints THS Total Endpoints WPWS(ns) TPWS(ns) TPWS Failing Endpoints TPWS Total Endpoints ------- ------- --------------------- ------------------- ------- ------- --------------------- ------------------- -------- -------- ---------------------- -------------------- NA NA NA NA NA NA NA NA 4.500 0.000 0 6 All user specified timing constraints are met. ------------------------------------------------------------------------------------------------ | Clock Summary | ------------- ------------------------------------------------------------------------------------------------ Clock Waveform(ns) Period(ns) Frequency(MHz) ----- ------------ ---------- -------------- sys_clk_pin {0.000 5.000} 10.000 100.000 ------------------------------------------------------------------------------------------------ | Intra Clock Table | ----------------- ------------------------------------------------------------------------------------------------ Clock WNS(ns) TNS(ns) TNS Failing Endpoints TNS Total Endpoints WHS(ns) THS(ns) THS Failing Endpoints THS Total Endpoints WPWS(ns) TPWS(ns) TPWS Failing Endpoints TPWS Total Endpoints ----- ------- ------- --------------------- ------------------- ------- ------- --------------------- ------------------- -------- -------- ---------------------- -------------------- sys_clk_pin 4.500 0.000 0 6 ------------------------------------------------------------------------------------------------ | Inter Clock Table | ----------------- ------------------------------------------------------------------------------------------------ From Clock To Clock WNS(ns) TNS(ns) TNS Failing Endpoints TNS Total Endpoints WHS(ns) THS(ns) THS Failing Endpoints THS Total Endpoints ---------- -------- ------- ------- --------------------- ------------------- ------- ------- --------------------- ------------------- ------------------------------------------------------------------------------------------------ | Other Path Groups Table | ----------------------- ------------------------------------------------------------------------------------------------ Path Group From Clock To Clock WNS(ns) TNS(ns) TNS Failing Endpoints TNS Total Endpoints WHS(ns) THS(ns) THS Failing Endpoints THS Total Endpoints ---------- ---------- -------- ------- ------- --------------------- ------------------- ------- ------- --------------------- ------------------- ------------------------------------------------------------------------------------------------ | Timing Details | -------------- ------------------------------------------------------------------------------------------------ --------------------------------------------------------------------------------------------------- From Clock: sys_clk_pin To Clock: sys_clk_pin Setup : NA Failing Endpoints, Worst Slack NA , Total Violation NA Hold : NA Failing Endpoints, Worst Slack NA , Total Violation NA PW : 0 Failing Endpoints, Worst Slack 4.500ns, Total Violation 0.000ns --------------------------------------------------------------------------------------------------- Pulse Width Checks -------------------------------------------------------------------------------------- Clock Name: sys_clk_pin Waveform(ns): { 0.000 5.000 } Period(ns): 10.000 Sources: { clk } Check Type Corner Lib Pin Reference Pin Required(ns) Actual(ns) Slack(ns) Location Pin Min Period n/a BUFG/I n/a 2.155 10.000 7.845 BUFGCTRL_X0Y0 clk_IBUF_BUFG_inst/I Min Period n/a FDRE/C n/a 1.000 10.000 9.000 SLICE_X0Y11 rl/Q_reg[0]/C Min Period n/a FDRE/C n/a 1.000 10.000 9.000 SLICE_X1Y11 rl/Q_reg[1]/C Min Period n/a FDRE/C n/a 1.000 10.000 9.000 SLICE_X0Y11 rl/Q_reg[2]/C Min Period n/a FDRE/C n/a 1.000 10.000 9.000 SLICE_X0Y11 rl/Q_reg[3]/C Min Period n/a FDRE/C n/a 1.000 10.000 9.000 SLICE_X0Y11 rl/Q_reg[4]/C Low Pulse Width Fast FDRE/C n/a 0.500 5.000 4.500 SLICE_X0Y11 rl/Q_reg[0]/C Low Pulse Width Fast FDRE/C n/a 0.500 5.000 4.500 SLICE_X1Y11 rl/Q_reg[1]/C Low Pulse Width Fast FDRE/C n/a 0.500 5.000 4.500 SLICE_X0Y11 rl/Q_reg[2]/C Low Pulse Width Fast FDRE/C n/a 0.500 5.000 4.500 SLICE_X0Y11 rl/Q_reg[3]/C Low Pulse Width Fast FDRE/C n/a 0.500 5.000 4.500 SLICE_X0Y11 rl/Q_reg[4]/C Low Pulse Width Slow FDRE/C n/a 0.500 5.000 4.500 SLICE_X0Y11 rl/Q_reg[0]/C Low Pulse Width Slow FDRE/C n/a 0.500 5.000 4.500 SLICE_X1Y11 rl/Q_reg[1]/C Low Pulse Width Slow FDRE/C n/a 0.500 5.000 4.500 SLICE_X0Y11 rl/Q_reg[2]/C Low Pulse Width Slow FDRE/C n/a 0.500 5.000 4.500 SLICE_X0Y11 rl/Q_reg[3]/C Low Pulse Width Slow FDRE/C n/a 0.500 5.000 4.500 SLICE_X0Y11 rl/Q_reg[4]/C High Pulse Width Slow FDRE/C n/a 0.500 5.000 4.500 SLICE_X0Y11 rl/Q_reg[0]/C High Pulse Width Fast FDRE/C n/a 0.500 5.000 4.500 SLICE_X0Y11 rl/Q_reg[0]/C High Pulse Width Slow FDRE/C n/a 0.500 5.000 4.500 SLICE_X1Y11 rl/Q_reg[1]/C High Pulse Width Fast FDRE/C n/a 0.500 5.000 4.500 SLICE_X1Y11 rl/Q_reg[1]/C High Pulse Width Slow FDRE/C n/a 0.500 5.000 4.500 SLICE_X0Y11 rl/Q_reg[2]/C High Pulse Width Fast FDRE/C n/a 0.500 5.000 4.500 SLICE_X0Y11 rl/Q_reg[2]/C High Pulse Width Slow FDRE/C n/a 0.500 5.000 4.500 SLICE_X0Y11 rl/Q_reg[3]/C High Pulse Width Fast FDRE/C n/a 0.500 5.000 4.500 SLICE_X0Y11 rl/Q_reg[3]/C High Pulse Width Slow FDRE/C n/a 0.500 5.000 4.500 SLICE_X0Y11 rl/Q_reg[4]/C High Pulse Width Fast FDRE/C n/a 0.500 5.000 4.500 SLICE_X0Y11 rl/Q_reg[4]/C