// Timer3.c // Runs on LM4F120/TM4C123 // Use Timer3 in 32-bit periodic mode to request interrupts at a periodic rate // Daniel Valvano // September 20, 2018 /* This example accompanies the book "Embedded Systems: Real Time Interfacing to Arm Cortex M Microcontrollers", ISBN: 978-1463590154, Jonathan Valvano, copyright (c) 2013 Program 7.5, example 7.6 Copyright 2013 by Jonathan W. Valvano, valvano@mail.utexas.edu You may use, edit, run or distribute this file as long as the above copyright notice remains THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. VALVANO SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. For more information about my classes, my research, and my books, see http://users.ece.utexas.edu/~valvano/ */ #include #include "../inc/tm4c123gh6pm.h" void (*PeriodicTask3)(void); // user function // ***************** Timer3_Init **************** // Activate Timer3 interrupts to run user task periodically // Inputs: task is a pointer to a user function // period in units (1/clockfreq) // Outputs: none void Timer3_Init(void(*task)(void), uint32_t period){ SYSCTL_RCGCTIMER_R |= 0x08; // 0) activate TIMER3 PeriodicTask3 = task; // user function TIMER3_CTL_R = 0x00000000; // 1) disable TIMER3A during setup TIMER3_CFG_R = 0x00000000; // 2) configure for 32-bit mode TIMER3_TAMR_R = 0x00000002; // 3) configure for periodic mode, default down-count settings TIMER3_TAILR_R = period-1; // 4) reload value TIMER3_TAPR_R = 0; // 5) bus clock resolution TIMER3_ICR_R = 0x00000001; // 6) clear TIMER3A timeout flag TIMER3_IMR_R = 0x00000001; // 7) arm timeout interrupt NVIC_PRI8_R = (NVIC_PRI8_R&0x00FFFFFF)|0x80000000; // 8) priority 4 // interrupts enabled in the main program after all devices initialized // vector number 51, interrupt number 35 NVIC_EN1_R = 1<<(35-32); // 9) enable IRQ 35 in NVIC TIMER3_CTL_R = 0x00000001; // 10) enable TIMER3A } void Timer3A_Handler(void){ TIMER3_ICR_R = TIMER_ICR_TATOCINT;// acknowledge TIMER3A timeout (*PeriodicTask3)(); // execute user task }