// Timer2.c // Runs on LM4F120/TM4C123 // Use TIMER2 in 32-bit periodic mode to request interrupts at a periodic rate // Daniel Valvano // September 20, 2018 /* This example accompanies the book "Embedded Systems: Real Time Interfacing to Arm Cortex M Microcontrollers", ISBN: 978-1463590154, Jonathan Valvano, copyright (c) 2018 Program 7.5, example 7.6 Copyright 2018 by Jonathan W. Valvano, valvano@mail.utexas.edu You may use, edit, run or distribute this file as long as the above copyright notice remains THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. VALVANO SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. For more information about my classes, my research, and my books, see http://users.ece.utexas.edu/~valvano/ */ #include #include "../inc/tm4c123gh6pm.h" void (*PeriodicTask2)(void); // user function // ***************** Timer2_Init **************** // Activate Timer2 interrupts to run user task periodically // Inputs: task is a pointer to a user function // period in units (1/clockfreq) // Outputs: none void Timer2_Init(void(*task)(void), uint32_t period){ SYSCTL_RCGCTIMER_R |= 0x04; // 0) activate timer2 PeriodicTask2 = task; // user function TIMER2_CTL_R = 0x00000000; // 1) disable timer2A during setup TIMER2_CFG_R = 0x00000000; // 2) configure for 32-bit mode TIMER2_TAMR_R = 0x00000002; // 3) configure for periodic mode, default down-count settings TIMER2_TAILR_R = period-1; // 4) reload value TIMER2_TAPR_R = 0; // 5) bus clock resolution TIMER2_ICR_R = 0x00000001; // 6) clear timer2A timeout flag TIMER2_IMR_R = 0x00000001; // 7) arm timeout interrupt NVIC_PRI5_R = (NVIC_PRI5_R&0x00FFFFFF)|0x80000000; // 8) priority 4 // interrupts enabled in the main program after all devices initialized // vector number 39, interrupt number 23 NVIC_EN0_R = 1<<23; // 9) enable IRQ 23 in NVIC TIMER2_CTL_R = 0x00000001; // 10) enable timer2A } void Timer2A_Handler(void){ TIMER2_ICR_R = TIMER_ICR_TATOCINT;// acknowledge TIMER2A timeout (*PeriodicTask2)(); // execute user task }