+/EE445L
embedded systems
git clone https://git.julia.blue/+/EE445L
99480b6
master
1// PortF.h 2// Runs on LM4F120/TM4C123 3// Simple GPIO on Port F. 4// Jonathan Valvano 5// September 20, 2018 6 7/* This example accompanies the book 8"Embedded Systems: Real Time Interfacing to Arm Cortex M Microcontrollers", 9ISBN: 978-1463590154, Jonathan Valvano, copyright (c) 2018 1011 Copyright 2018 by Jonathan W. Valvano, valvano@mail.utexas.edu 12You may use, edit, run or distribute this file 13as long as the above copyright notice remains 14THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED 15OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF 16MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. 17VALVANO SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, 18OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. 19For more information about my classes, my research, and my books, see 20http://users.ece.utexas.edu/~valvano/ 21*/ 22#ifndef _PORTFH_ 23#define _PORTFH_ 24#include <stdint.h> 25#define PF0 (*((volatile uint32_t *)0x40025004)) 26#define PF1 (*((volatile uint32_t *)0x40025008)) 27#define PF2 (*((volatile uint32_t *)0x40025010)) 28#define PF3 (*((volatile uint32_t *)0x40025020)) 29#define PF4 (*((volatile uint32_t *)0x40025040)) 30#define SWITCHES (*((volatile uint32_t *)0x40025044)) 31#define SW1 0x10 // on the left side of the Launchpad board 32#define SW2 0x01 // on the right side of the Launchpad board 33#define RED 0x02 34#define BLUE 0x04 35#define GREEN 0x08 36// Initialize PortF switches and LEDs 37void PortF_Init (void ); 38// read switches, 39// Bit4 and Bit0 are in negative logic 40// returns 0x00,0x01,0x10, or 0x11 41uint32_t PortF_Input (void ); 42 43// Output to LEDs 44// LEDs on bits 1,2,3 45void PortF_Output (uint32_t data ); 46#endif 47