+/EE445L

embedded systems

git clone https://git.julia.blue/+/EE445L

jspspikeAdded lab4 files99480b6

master
4.3 KiB117 linesraw
1// UART.h
2// Runs on LM4F120/TM4C123
3// Use UART0 to implement bidirectional data transfer to and from a
4// computer running PuTTy. Interrupts and software FIFOs are used.
5// Daniel Valvano
6// September 20, 2018
7#ifndef _UARTH_
8#define _UARTH_
9#include <stdint.h>
10/* This example accompanies the book
11   "Embedded Systems: Real Time Interfacing to Arm Cortex M Microcontrollers",
12   ISBN: 978-1463590154, Jonathan Valvano, copyright (c) 2018
13   Program 5.11 Section 5.6, Program 3.10
14
15 Copyright 2018 by Jonathan W. Valvano, valvano@mail.utexas.edu
16    You may use, edit, run or distribute this file
17    as long as the above copyright notice remains
18 THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
19 OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
20 MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
21 VALVANO SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL,
22 OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
23 For more information about my classes, my research, and my books, see
24 http://users.ece.utexas.edu/~valvano/
25 */
26
27// U0Rx (VCP receive) connected to PA0
28// U0Tx (VCP transmit) connected to PA1
29
30// standard ASCII symbols
31#define CR   0x0D
32#define LF   0x0A
33#define BS   0x08
34#define ESC  0x1B
35#define SP   0x20
36#define DEL  0x7F
37
38//------------UART_Init------------
39// Initialize the UART for 115,200 baud rate (assuming 80 MHz clock),
40// 8 bit word length, no parity bits, one stop bit, FIFOs enabled
41// Input: none
42// Output: none
43void UART_Init(uint32_t priority);
44
45//------------UART_InChar------------
46// Wait for new serial port input
47// Input: none
48// Output: ASCII code for key typed
49char UART_InChar(void);
50
51// input ASCII character from UART
52// return 0 if RxFifo is empty
53char UART_InCharNonBlock(void);
54
55//------------UART_OutChar------------
56// Output 8-bit to serial port
57// Input: letter is an 8-bit ASCII character to be transferred
58// Output: none
59void UART_OutChar(char data);
60
61//------------UART_OutString------------
62// Output String (NULL termination)
63// Input: pointer to a NULL-terminated string to be transferred
64// Output: none
65void UART_OutString(char *pt);
66
67//------------UART_InUDec------------
68// InUDec accepts ASCII input in unsigned decimal format
69//     and converts to a 32-bit unsigned number
70//     valid range is 0 to 4294967295 (2^32-1)
71// Input: none
72// Output: 32-bit unsigned number
73// If you enter a number above 4294967295, it will return an incorrect value
74// Backspace will remove last digit typed
75uint32_t UART_InUDec(void);
76
77//-----------------------UART_OutUDec-----------------------
78// Output a 32-bit number in unsigned decimal format
79// Input: 32-bit number to be transferred
80// Output: none
81// Variable format 1-10 digits with no space before or after
82void UART_OutUDec(uint32_t n);
83
84//---------------------UART_InUHex----------------------------------------
85// Accepts ASCII input in unsigned hexadecimal (base 16) format
86// Input: none
87// Output: 32-bit unsigned number
88// No '$' or '0x' need be entered, just the 1 to 8 hex digits
89// It will convert lower case a-f to uppercase A-F
90//     and converts to a 16 bit unsigned number
91//     value range is 0 to FFFFFFFF
92// If you enter a number above FFFFFFFF, it will return an incorrect value
93// Backspace will remove last digit typed
94uint32_t UART_InUHex(void);
95
96//--------------------------UART_OutUHex----------------------------
97// Output a 32-bit number in unsigned hexadecimal format
98// Input: 32-bit number to be transferred
99// Output: none
100// Variable format 1 to 8 digits with no space before or after
101void UART_OutUHex(uint32_t number);
102
103//------------UART_InString------------
104// Accepts ASCII characters from the serial port
105//    and adds them to a string until <enter> is typed
106//    or until max length of the string is reached.
107// It echoes each character as it is inputted.
108// If a backspace is inputted, the string is modified
109//    and the backspace is echoed
110// terminates the string with a null character
111// uses busy-waiting synchronization on RDRF
112// Input: pointer to empty buffer, size of buffer
113// Output: Null terminated string
114// -- Modified by Agustinus Darmawan + Mingjie Qiu --
115void UART_InString(char *bufPt, uint16_t max);
116
117#endif