+/rtos
git clone https://git.julia.blue/+/rtos
4786702
master
1//***************************************************************************** 2// 3// hw_can.h - Defines and macros used when accessing the CAN controllers. 4// 5// Copyright (c) 2006-2017 Texas Instruments Incorporated. All rights reserved. 6// Software License Agreement 7// 8// Redistribution and use in source and binary forms, with or without 9// modification, are permitted provided that the following conditions 10// are met: 11// 12// Redistributions of source code must retain the above copyright 13// notice, this list of conditions and the following disclaimer. 14// 15// Redistributions in binary form must reproduce the above copyright 16// notice, this list of conditions and the following disclaimer in the 17// documentation and/or other materials provided with the 18// distribution. 19// 20// Neither the name of Texas Instruments Incorporated nor the names of 21// its contributors may be used to endorse or promote products derived 22// from this software without specific prior written permission. 23// 24// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 25// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 26// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 27// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 28// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 29// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 30// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 31// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 32// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 33// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 34// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 35// 36// This is part of revision 2.1.4.178 of the Tiva Firmware Development Package. 37// 38//***************************************************************************** 39 40#ifndef __HW_CAN_H__ 41#define __HW_CAN_H__ 42 43//***************************************************************************** 44// 45// The following are defines for the CAN register offsets. 46// 47//***************************************************************************** 48#define CAN_O_CTL 0x00000000 // CAN Control 49#define CAN_O_STS 0x00000004 // CAN Status 50#define CAN_O_ERR 0x00000008 // CAN Error Counter 51#define CAN_O_BIT 0x0000000C // CAN Bit Timing 52#define CAN_O_INT 0x00000010 // CAN Interrupt 53#define CAN_O_TST 0x00000014 // CAN Test 54#define CAN_O_BRPE 0x00000018 // CAN Baud Rate Prescaler 55// Extension 56#define CAN_O_IF1CRQ 0x00000020 // CAN IF1 Command Request 57#define CAN_O_IF1CMSK 0x00000024 // CAN IF1 Command Mask 58#define CAN_O_IF1MSK1 0x00000028 // CAN IF1 Mask 1 59#define CAN_O_IF1MSK2 0x0000002C // CAN IF1 Mask 2 60#define CAN_O_IF1ARB1 0x00000030 // CAN IF1 Arbitration 1 61#define CAN_O_IF1ARB2 0x00000034 // CAN IF1 Arbitration 2 62#define CAN_O_IF1MCTL 0x00000038 // CAN IF1 Message Control 63#define CAN_O_IF1DA1 0x0000003C // CAN IF1 Data A1 64#define CAN_O_IF1DA2 0x00000040 // CAN IF1 Data A2 65#define CAN_O_IF1DB1 0x00000044 // CAN IF1 Data B1 66#define CAN_O_IF1DB2 0x00000048 // CAN IF1 Data B2 67#define CAN_O_IF2CRQ 0x00000080 // CAN IF2 Command Request 68#define CAN_O_IF2CMSK 0x00000084 // CAN IF2 Command Mask 69#define CAN_O_IF2MSK1 0x00000088 // CAN IF2 Mask 1 70#define CAN_O_IF2MSK2 0x0000008C // CAN IF2 Mask 2 71#define CAN_O_IF2ARB1 0x00000090 // CAN IF2 Arbitration 1 72#define CAN_O_IF2ARB2 0x00000094 // CAN IF2 Arbitration 2 73#define CAN_O_IF2MCTL 0x00000098 // CAN IF2 Message Control 74#define CAN_O_IF2DA1 0x0000009C // CAN IF2 Data A1 75#define CAN_O_IF2DA2 0x000000A0 // CAN IF2 Data A2 76#define CAN_O_IF2DB1 0x000000A4 // CAN IF2 Data B1 77#define CAN_O_IF2DB2 0x000000A8 // CAN IF2 Data B2 78#define CAN_O_TXRQ1 0x00000100 // CAN Transmission Request 1 79#define CAN_O_TXRQ2 0x00000104 // CAN Transmission Request 2 80#define CAN_O_NWDA1 0x00000120 // CAN New Data 1 81#define CAN_O_NWDA2 0x00000124 // CAN New Data 2 82#define CAN_O_MSG1INT 0x00000140 // CAN Message 1 Interrupt Pending 83#define CAN_O_MSG2INT 0x00000144 // CAN Message 2 Interrupt Pending 84#define CAN_O_MSG1VAL 0x00000160 // CAN Message 1 Valid 85#define CAN_O_MSG2VAL 0x00000164 // CAN Message 2 Valid 86 87//***************************************************************************** 88// 89// The following are defines for the bit fields in the CAN_O_CTL register. 90// 91//***************************************************************************** 92#define CAN_CTL_TEST 0x00000080 // Test Mode Enable 93#define CAN_CTL_CCE 0x00000040 // Configuration Change Enable 94#define CAN_CTL_DAR 0x00000020 // Disable Automatic-Retransmission 95#define CAN_CTL_EIE 0x00000008 // Error Interrupt Enable 96#define CAN_CTL_SIE 0x00000004 // Status Interrupt Enable 97#define CAN_CTL_IE 0x00000002 // CAN Interrupt Enable 98#define CAN_CTL_INIT 0x00000001 // Initialization 99 100//***************************************************************************** 101// 102// The following are defines for the bit fields in the CAN_O_STS register. 103// 104//***************************************************************************** 105#define CAN_STS_BOFF 0x00000080 // Bus-Off Status 106#define CAN_STS_EWARN 0x00000040 // Warning Status 107#define CAN_STS_EPASS 0x00000020 // Error Passive 108#define CAN_STS_RXOK 0x00000010 // Received a Message Successfully 109#define CAN_STS_TXOK 0x00000008 // Transmitted a Message 110// Successfully 111#define CAN_STS_LEC_M 0x00000007 // Last Error Code 112#define CAN_STS_LEC_NONE 0x00000000 // No Error 113#define CAN_STS_LEC_STUFF 0x00000001 // Stuff Error 114#define CAN_STS_LEC_FORM 0x00000002 // Format Error 115#define CAN_STS_LEC_ACK 0x00000003 // ACK Error 116#define CAN_STS_LEC_BIT1 0x00000004 // Bit 1 Error 117#define CAN_STS_LEC_BIT0 0x00000005 // Bit 0 Error 118#define CAN_STS_LEC_CRC 0x00000006 // CRC Error 119#define CAN_STS_LEC_NOEVENT 0x00000007 // No Event 120 121//***************************************************************************** 122// 123// The following are defines for the bit fields in the CAN_O_ERR register. 124// 125//***************************************************************************** 126#define CAN_ERR_RP 0x00008000 // Received Error Passive 127#define CAN_ERR_REC_M 0x00007F00 // Receive Error Counter 128#define CAN_ERR_TEC_M 0x000000FF // Transmit Error Counter 129#define CAN_ERR_REC_S 8 130#define CAN_ERR_TEC_S 0 131 132//***************************************************************************** 133// 134// The following are defines for the bit fields in the CAN_O_BIT register. 135// 136//***************************************************************************** 137#define CAN_BIT_TSEG2_M 0x00007000 // Time Segment after Sample Point 138#define CAN_BIT_TSEG1_M 0x00000F00 // Time Segment Before Sample Point 139#define CAN_BIT_SJW_M 0x000000C0 // (Re)Synchronization Jump Width 140#define CAN_BIT_BRP_M 0x0000003F // Baud Rate Prescaler 141#define CAN_BIT_TSEG2_S 12 142#define CAN_BIT_TSEG1_S 8 143#define CAN_BIT_SJW_S 6 144#define CAN_BIT_BRP_S 0 145 146//***************************************************************************** 147// 148// The following are defines for the bit fields in the CAN_O_INT register. 149// 150//***************************************************************************** 151#define CAN_INT_INTID_M 0x0000FFFF // Interrupt Identifier 152#define CAN_INT_INTID_NONE 0x00000000 // No interrupt pending 153#define CAN_INT_INTID_STATUS 0x00008000 // Status Interrupt 154 155//***************************************************************************** 156// 157// The following are defines for the bit fields in the CAN_O_TST register. 158// 159//***************************************************************************** 160#define CAN_TST_RX 0x00000080 // Receive Observation 161#define CAN_TST_TX_M 0x00000060 // Transmit Control 162#define CAN_TST_TX_CANCTL 0x00000000 // CAN Module Control 163#define CAN_TST_TX_SAMPLE 0x00000020 // Sample Point 164#define CAN_TST_TX_DOMINANT 0x00000040 // Driven Low 165#define CAN_TST_TX_RECESSIVE 0x00000060 // Driven High 166#define CAN_TST_LBACK 0x00000010 // Loopback Mode 167#define CAN_TST_SILENT 0x00000008 // Silent Mode 168#define CAN_TST_BASIC 0x00000004 // Basic Mode 169 170//***************************************************************************** 171// 172// The following are defines for the bit fields in the CAN_O_BRPE register. 173// 174//***************************************************************************** 175#define CAN_BRPE_BRPE_M 0x0000000F // Baud Rate Prescaler Extension 176#define CAN_BRPE_BRPE_S 0 177 178//***************************************************************************** 179// 180// The following are defines for the bit fields in the CAN_O_IF1CRQ register. 181// 182//***************************************************************************** 183#define CAN_IF1CRQ_BUSY 0x00008000 // Busy Flag 184#define CAN_IF1CRQ_MNUM_M 0x0000003F // Message Number 185#define CAN_IF1CRQ_MNUM_S 0 186 187//***************************************************************************** 188// 189// The following are defines for the bit fields in the CAN_O_IF1CMSK register. 190// 191//***************************************************************************** 192#define CAN_IF1CMSK_WRNRD 0x00000080 // Write, Not Read 193#define CAN_IF1CMSK_MASK 0x00000040 // Access Mask Bits 194#define CAN_IF1CMSK_ARB 0x00000020 // Access Arbitration Bits 195#define CAN_IF1CMSK_CONTROL 0x00000010 // Access Control Bits 196#define CAN_IF1CMSK_CLRINTPND 0x00000008 // Clear Interrupt Pending Bit 197#define CAN_IF1CMSK_NEWDAT 0x00000004 // Access New Data 198#define CAN_IF1CMSK_TXRQST 0x00000004 // Access Transmission Request 199#define CAN_IF1CMSK_DATAA 0x00000002 // Access Data Byte 0 to 3 200#define CAN_IF1CMSK_DATAB 0x00000001 // Access Data Byte 4 to 7 201 202//***************************************************************************** 203// 204// The following are defines for the bit fields in the CAN_O_IF1MSK1 register. 205// 206//***************************************************************************** 207#define CAN_IF1MSK1_IDMSK_M 0x0000FFFF // Identifier Mask 208#define CAN_IF1MSK1_IDMSK_S 0 209 210//***************************************************************************** 211// 212// The following are defines for the bit fields in the CAN_O_IF1MSK2 register. 213// 214//***************************************************************************** 215#define CAN_IF1MSK2_MXTD 0x00008000 // Mask Extended Identifier 216#define CAN_IF1MSK2_MDIR 0x00004000 // Mask Message Direction 217#define CAN_IF1MSK2_IDMSK_M 0x00001FFF // Identifier Mask 218#define CAN_IF1MSK2_IDMSK_S 0 219 220//***************************************************************************** 221// 222// The following are defines for the bit fields in the CAN_O_IF1ARB1 register. 223// 224//***************************************************************************** 225#define CAN_IF1ARB1_ID_M 0x0000FFFF // Message Identifier 226#define CAN_IF1ARB1_ID_S 0 227 228//***************************************************************************** 229// 230// The following are defines for the bit fields in the CAN_O_IF1ARB2 register. 231// 232//***************************************************************************** 233#define CAN_IF1ARB2_MSGVAL 0x00008000 // Message Valid 234#define CAN_IF1ARB2_XTD 0x00004000 // Extended Identifier 235#define CAN_IF1ARB2_DIR 0x00002000 // Message Direction 236#define CAN_IF1ARB2_ID_M 0x00001FFF // Message Identifier 237#define CAN_IF1ARB2_ID_S 0 238 239//***************************************************************************** 240// 241// The following are defines for the bit fields in the CAN_O_IF1MCTL register. 242// 243//***************************************************************************** 244#define CAN_IF1MCTL_NEWDAT 0x00008000 // New Data 245#define CAN_IF1MCTL_MSGLST 0x00004000 // Message Lost 246#define CAN_IF1MCTL_INTPND 0x00002000 // Interrupt Pending 247#define CAN_IF1MCTL_UMASK 0x00001000 // Use Acceptance Mask 248#define CAN_IF1MCTL_TXIE 0x00000800 // Transmit Interrupt Enable 249#define CAN_IF1MCTL_RXIE 0x00000400 // Receive Interrupt Enable 250#define CAN_IF1MCTL_RMTEN 0x00000200 // Remote Enable 251#define CAN_IF1MCTL_TXRQST 0x00000100 // Transmit Request 252#define CAN_IF1MCTL_EOB 0x00000080 // End of Buffer 253#define CAN_IF1MCTL_DLC_M 0x0000000F // Data Length Code 254#define CAN_IF1MCTL_DLC_S 0 255 256//***************************************************************************** 257// 258// The following are defines for the bit fields in the CAN_O_IF1DA1 register. 259// 260//***************************************************************************** 261#define CAN_IF1DA1_DATA_M 0x0000FFFF // Data 262#define CAN_IF1DA1_DATA_S 0 263 264//***************************************************************************** 265// 266// The following are defines for the bit fields in the CAN_O_IF1DA2 register. 267// 268//***************************************************************************** 269#define CAN_IF1DA2_DATA_M 0x0000FFFF // Data 270#define CAN_IF1DA2_DATA_S 0 271 272//***************************************************************************** 273// 274// The following are defines for the bit fields in the CAN_O_IF1DB1 register. 275// 276//***************************************************************************** 277#define CAN_IF1DB1_DATA_M 0x0000FFFF // Data 278#define CAN_IF1DB1_DATA_S 0 279 280//***************************************************************************** 281// 282// The following are defines for the bit fields in the CAN_O_IF1DB2 register. 283// 284//***************************************************************************** 285#define CAN_IF1DB2_DATA_M 0x0000FFFF // Data 286#define CAN_IF1DB2_DATA_S 0 287 288//***************************************************************************** 289// 290// The following are defines for the bit fields in the CAN_O_IF2CRQ register. 291// 292//***************************************************************************** 293#define CAN_IF2CRQ_BUSY 0x00008000 // Busy Flag 294#define CAN_IF2CRQ_MNUM_M 0x0000003F // Message Number 295#define CAN_IF2CRQ_MNUM_S 0 296 297//***************************************************************************** 298// 299// The following are defines for the bit fields in the CAN_O_IF2CMSK register. 300// 301//***************************************************************************** 302#define CAN_IF2CMSK_WRNRD 0x00000080 // Write, Not Read 303#define CAN_IF2CMSK_MASK 0x00000040 // Access Mask Bits 304#define CAN_IF2CMSK_ARB 0x00000020 // Access Arbitration Bits 305#define CAN_IF2CMSK_CONTROL 0x00000010 // Access Control Bits 306#define CAN_IF2CMSK_CLRINTPND 0x00000008 // Clear Interrupt Pending Bit 307#define CAN_IF2CMSK_NEWDAT 0x00000004 // Access New Data 308#define CAN_IF2CMSK_TXRQST 0x00000004 // Access Transmission Request 309#define CAN_IF2CMSK_DATAA 0x00000002 // Access Data Byte 0 to 3 310#define CAN_IF2CMSK_DATAB 0x00000001 // Access Data Byte 4 to 7 311 312//***************************************************************************** 313// 314// The following are defines for the bit fields in the CAN_O_IF2MSK1 register. 315// 316//***************************************************************************** 317#define CAN_IF2MSK1_IDMSK_M 0x0000FFFF // Identifier Mask 318#define CAN_IF2MSK1_IDMSK_S 0 319 320//***************************************************************************** 321// 322// The following are defines for the bit fields in the CAN_O_IF2MSK2 register. 323// 324//***************************************************************************** 325#define CAN_IF2MSK2_MXTD 0x00008000 // Mask Extended Identifier 326#define CAN_IF2MSK2_MDIR 0x00004000 // Mask Message Direction 327#define CAN_IF2MSK2_IDMSK_M 0x00001FFF // Identifier Mask 328#define CAN_IF2MSK2_IDMSK_S 0 329 330//***************************************************************************** 331// 332// The following are defines for the bit fields in the CAN_O_IF2ARB1 register. 333// 334//***************************************************************************** 335#define CAN_IF2ARB1_ID_M 0x0000FFFF // Message Identifier 336#define CAN_IF2ARB1_ID_S 0 337 338//***************************************************************************** 339// 340// The following are defines for the bit fields in the CAN_O_IF2ARB2 register. 341// 342//***************************************************************************** 343#define CAN_IF2ARB2_MSGVAL 0x00008000 // Message Valid 344#define CAN_IF2ARB2_XTD 0x00004000 // Extended Identifier 345#define CAN_IF2ARB2_DIR 0x00002000 // Message Direction 346#define CAN_IF2ARB2_ID_M 0x00001FFF // Message Identifier 347#define CAN_IF2ARB2_ID_S 0 348 349//***************************************************************************** 350// 351// The following are defines for the bit fields in the CAN_O_IF2MCTL register. 352// 353//***************************************************************************** 354#define CAN_IF2MCTL_NEWDAT 0x00008000 // New Data 355#define CAN_IF2MCTL_MSGLST 0x00004000 // Message Lost 356#define CAN_IF2MCTL_INTPND 0x00002000 // Interrupt Pending 357#define CAN_IF2MCTL_UMASK 0x00001000 // Use Acceptance Mask 358#define CAN_IF2MCTL_TXIE 0x00000800 // Transmit Interrupt Enable 359#define CAN_IF2MCTL_RXIE 0x00000400 // Receive Interrupt Enable 360#define CAN_IF2MCTL_RMTEN 0x00000200 // Remote Enable 361#define CAN_IF2MCTL_TXRQST 0x00000100 // Transmit Request 362#define CAN_IF2MCTL_EOB 0x00000080 // End of Buffer 363#define CAN_IF2MCTL_DLC_M 0x0000000F // Data Length Code 364#define CAN_IF2MCTL_DLC_S 0 365 366//***************************************************************************** 367// 368// The following are defines for the bit fields in the CAN_O_IF2DA1 register. 369// 370//***************************************************************************** 371#define CAN_IF2DA1_DATA_M 0x0000FFFF // Data 372#define CAN_IF2DA1_DATA_S 0 373 374//***************************************************************************** 375// 376// The following are defines for the bit fields in the CAN_O_IF2DA2 register. 377// 378//***************************************************************************** 379#define CAN_IF2DA2_DATA_M 0x0000FFFF // Data 380#define CAN_IF2DA2_DATA_S 0 381 382//***************************************************************************** 383// 384// The following are defines for the bit fields in the CAN_O_IF2DB1 register. 385// 386//***************************************************************************** 387#define CAN_IF2DB1_DATA_M 0x0000FFFF // Data 388#define CAN_IF2DB1_DATA_S 0 389 390//***************************************************************************** 391// 392// The following are defines for the bit fields in the CAN_O_IF2DB2 register. 393// 394//***************************************************************************** 395#define CAN_IF2DB2_DATA_M 0x0000FFFF // Data 396#define CAN_IF2DB2_DATA_S 0 397 398//***************************************************************************** 399// 400// The following are defines for the bit fields in the CAN_O_TXRQ1 register. 401// 402//***************************************************************************** 403#define CAN_TXRQ1_TXRQST_M 0x0000FFFF // Transmission Request Bits 404#define CAN_TXRQ1_TXRQST_S 0 405 406//***************************************************************************** 407// 408// The following are defines for the bit fields in the CAN_O_TXRQ2 register. 409// 410//***************************************************************************** 411#define CAN_TXRQ2_TXRQST_M 0x0000FFFF // Transmission Request Bits 412#define CAN_TXRQ2_TXRQST_S 0 413 414//***************************************************************************** 415// 416// The following are defines for the bit fields in the CAN_O_NWDA1 register. 417// 418//***************************************************************************** 419#define CAN_NWDA1_NEWDAT_M 0x0000FFFF // New Data Bits 420#define CAN_NWDA1_NEWDAT_S 0 421 422//***************************************************************************** 423// 424// The following are defines for the bit fields in the CAN_O_NWDA2 register. 425// 426//***************************************************************************** 427#define CAN_NWDA2_NEWDAT_M 0x0000FFFF // New Data Bits 428#define CAN_NWDA2_NEWDAT_S 0 429 430//***************************************************************************** 431// 432// The following are defines for the bit fields in the CAN_O_MSG1INT register. 433// 434//***************************************************************************** 435#define CAN_MSG1INT_INTPND_M 0x0000FFFF // Interrupt Pending Bits 436#define CAN_MSG1INT_INTPND_S 0 437 438//***************************************************************************** 439// 440// The following are defines for the bit fields in the CAN_O_MSG2INT register. 441// 442//***************************************************************************** 443#define CAN_MSG2INT_INTPND_M 0x0000FFFF // Interrupt Pending Bits 444#define CAN_MSG2INT_INTPND_S 0 445 446//***************************************************************************** 447// 448// The following are defines for the bit fields in the CAN_O_MSG1VAL register. 449// 450//***************************************************************************** 451#define CAN_MSG1VAL_MSGVAL_M 0x0000FFFF // Message Valid Bits 452#define CAN_MSG1VAL_MSGVAL_S 0 453 454//***************************************************************************** 455// 456// The following are defines for the bit fields in the CAN_O_MSG2VAL register. 457// 458//***************************************************************************** 459#define CAN_MSG2VAL_MSGVAL_M 0x0000FFFF // Message Valid Bits 460#define CAN_MSG2VAL_MSGVAL_S 0 461 462#endif // __HW_CAN_H__