+/rtos

git clone https://git.julia.blue/+/rtos

Vivek Malneediunified st7735/edisk ssi70edcf9

master
12.8 KiB237 linesraw
1//*****************************************************************************
2//
3// hw_ssi.h - Macros used when accessing the SSI hardware.
4//
5// Copyright (c) 2005-2017 Texas Instruments Incorporated.  All rights reserved.
6// Software License Agreement
7// 
8//   Redistribution and use in source and binary forms, with or without
9//   modification, are permitted provided that the following conditions
10//   are met:
11// 
12//   Redistributions of source code must retain the above copyright
13//   notice, this list of conditions and the following disclaimer.
14// 
15//   Redistributions in binary form must reproduce the above copyright
16//   notice, this list of conditions and the following disclaimer in the
17//   documentation and/or other materials provided with the  
18//   distribution.
19// 
20//   Neither the name of Texas Instruments Incorporated nor the names of
21//   its contributors may be used to endorse or promote products derived
22//   from this software without specific prior written permission.
23// 
24// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
25// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
26// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
27// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
28// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
29// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
30// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
31// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
32// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
33// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
34// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35// 
36// This is part of revision 2.1.4.178 of the Tiva Firmware Development Package.
37//
38//*****************************************************************************
39
40#ifndef __HW_SSI_H__
41#define __HW_SSI_H__
42
43//*****************************************************************************
44//
45// The following are defines for the SSI register offsets.
46//
47//*****************************************************************************
48#define SSI_O_CR0               0x00000000  // SSI Control 0
49#define SSI_O_CR1               0x00000004  // SSI Control 1
50#define SSI_O_DR                0x00000008  // SSI Data
51#define SSI_O_SR                0x0000000C  // SSI Status
52#define SSI_O_CPSR              0x00000010  // SSI Clock Prescale
53#define SSI_O_IM                0x00000014  // SSI Interrupt Mask
54#define SSI_O_RIS               0x00000018  // SSI Raw Interrupt Status
55#define SSI_O_MIS               0x0000001C  // SSI Masked Interrupt Status
56#define SSI_O_ICR               0x00000020  // SSI Interrupt Clear
57#define SSI_O_DMACTL            0x00000024  // SSI DMA Control
58#define SSI_O_PP                0x00000FC0  // SSI Peripheral Properties
59#define SSI_O_CC                0x00000FC8  // SSI Clock Configuration
60
61//*****************************************************************************
62//
63// The following are defines for the bit fields in the SSI_O_CR0 register.
64//
65//*****************************************************************************
66#define SSI_CR0_SCR_M           0x0000FF00  // SSI Serial Clock Rate
67#define SSI_CR0_SPH             0x00000080  // SSI Serial Clock Phase
68#define SSI_CR0_SPO             0x00000040  // SSI Serial Clock Polarity
69#define SSI_CR0_FRF_M           0x00000030  // SSI Frame Format Select
70#define SSI_CR0_FRF_MOTO        0x00000000  // Freescale SPI Frame Format
71#define SSI_CR0_FRF_TI          0x00000010  // Synchronous Serial Frame Format
72#define SSI_CR0_FRF_NMW         0x00000020  // MICROWIRE Frame Format
73#define SSI_CR0_DSS_M           0x0000000F  // SSI Data Size Select
74#define SSI_CR0_DSS_4           0x00000003  // 4-bit data
75#define SSI_CR0_DSS_5           0x00000004  // 5-bit data
76#define SSI_CR0_DSS_6           0x00000005  // 6-bit data
77#define SSI_CR0_DSS_7           0x00000006  // 7-bit data
78#define SSI_CR0_DSS_8           0x00000007  // 8-bit data
79#define SSI_CR0_DSS_9           0x00000008  // 9-bit data
80#define SSI_CR0_DSS_10          0x00000009  // 10-bit data
81#define SSI_CR0_DSS_11          0x0000000A  // 11-bit data
82#define SSI_CR0_DSS_12          0x0000000B  // 12-bit data
83#define SSI_CR0_DSS_13          0x0000000C  // 13-bit data
84#define SSI_CR0_DSS_14          0x0000000D  // 14-bit data
85#define SSI_CR0_DSS_15          0x0000000E  // 15-bit data
86#define SSI_CR0_DSS_16          0x0000000F  // 16-bit data
87#define SSI_CR0_SCR_S           8
88
89//*****************************************************************************
90//
91// The following are defines for the bit fields in the SSI_O_CR1 register.
92//
93//*****************************************************************************
94#define SSI_CR1_EOM             0x00000800  // Stop Frame (End of Message)
95#define SSI_CR1_FSSHLDFRM       0x00000400  // FSS Hold Frame
96#define SSI_CR1_HSCLKEN         0x00000200  // High Speed Clock Enable
97#define SSI_CR1_DIR             0x00000100  // SSI Direction of Operation
98#define SSI_CR1_MODE_M          0x000000C0  // SSI Mode
99#define SSI_CR1_MODE_LEGACY     0x00000000  // Legacy SSI mode
100#define SSI_CR1_MODE_BI         0x00000040  // Bi-SSI mode
101#define SSI_CR1_MODE_QUAD       0x00000080  // Quad-SSI Mode
102#define SSI_CR1_MODE_ADVANCED   0x000000C0  // Advanced SSI Mode with 8-bit
103                                            // packet size
104#define SSI_CR1_EOT             0x00000010  // End of Transmission
105#define SSI_CR1_MS              0x00000004  // SSI Master/Slave Select
106#define SSI_CR1_SSE             0x00000002  // SSI Synchronous Serial Port
107                                            // Enable
108#define SSI_CR1_LBM             0x00000001  // SSI Loopback Mode
109
110//*****************************************************************************
111//
112// The following are defines for the bit fields in the SSI_O_DR register.
113//
114//*****************************************************************************
115#define SSI_DR_DATA_M           0x0000FFFF  // SSI Receive/Transmit Data
116#define SSI_DR_DATA_S           0
117
118//*****************************************************************************
119//
120// The following are defines for the bit fields in the SSI_O_SR register.
121//
122//*****************************************************************************
123#define SSI_SR_BSY              0x00000010  // SSI Busy Bit
124#define SSI_SR_RFF              0x00000008  // SSI Receive FIFO Full
125#define SSI_SR_RNE              0x00000004  // SSI Receive FIFO Not Empty
126#define SSI_SR_TNF              0x00000002  // SSI Transmit FIFO Not Full
127#define SSI_SR_TFE              0x00000001  // SSI Transmit FIFO Empty
128
129//*****************************************************************************
130//
131// The following are defines for the bit fields in the SSI_O_CPSR register.
132//
133//*****************************************************************************
134#define SSI_CPSR_CPSDVSR_M      0x000000FF  // SSI Clock Prescale Divisor
135#define SSI_CPSR_CPSDVSR_S      0
136
137//*****************************************************************************
138//
139// The following are defines for the bit fields in the SSI_O_IM register.
140//
141//*****************************************************************************
142#define SSI_IM_EOTIM            0x00000040  // End of Transmit Interrupt Mask
143#define SSI_IM_DMATXIM          0x00000020  // SSI Transmit DMA Interrupt Mask
144#define SSI_IM_DMARXIM          0x00000010  // SSI Receive DMA Interrupt Mask
145#define SSI_IM_TXIM             0x00000008  // SSI Transmit FIFO Interrupt Mask
146#define SSI_IM_RXIM             0x00000004  // SSI Receive FIFO Interrupt Mask
147#define SSI_IM_RTIM             0x00000002  // SSI Receive Time-Out Interrupt
148                                            // Mask
149#define SSI_IM_RORIM            0x00000001  // SSI Receive Overrun Interrupt
150                                            // Mask
151
152//*****************************************************************************
153//
154// The following are defines for the bit fields in the SSI_O_RIS register.
155//
156//*****************************************************************************
157#define SSI_RIS_EOTRIS          0x00000040  // End of Transmit Raw Interrupt
158                                            // Status
159#define SSI_RIS_DMATXRIS        0x00000020  // SSI Transmit DMA Raw Interrupt
160                                            // Status
161#define SSI_RIS_DMARXRIS        0x00000010  // SSI Receive DMA Raw Interrupt
162                                            // Status
163#define SSI_RIS_TXRIS           0x00000008  // SSI Transmit FIFO Raw Interrupt
164                                            // Status
165#define SSI_RIS_RXRIS           0x00000004  // SSI Receive FIFO Raw Interrupt
166                                            // Status
167#define SSI_RIS_RTRIS           0x00000002  // SSI Receive Time-Out Raw
168                                            // Interrupt Status
169#define SSI_RIS_RORRIS          0x00000001  // SSI Receive Overrun Raw
170                                            // Interrupt Status
171
172//*****************************************************************************
173//
174// The following are defines for the bit fields in the SSI_O_MIS register.
175//
176//*****************************************************************************
177#define SSI_MIS_EOTMIS          0x00000040  // End of Transmit Masked Interrupt
178                                            // Status
179#define SSI_MIS_DMATXMIS        0x00000020  // SSI Transmit DMA Masked
180                                            // Interrupt Status
181#define SSI_MIS_DMARXMIS        0x00000010  // SSI Receive DMA Masked Interrupt
182                                            // Status
183#define SSI_MIS_TXMIS           0x00000008  // SSI Transmit FIFO Masked
184                                            // Interrupt Status
185#define SSI_MIS_RXMIS           0x00000004  // SSI Receive FIFO Masked
186                                            // Interrupt Status
187#define SSI_MIS_RTMIS           0x00000002  // SSI Receive Time-Out Masked
188                                            // Interrupt Status
189#define SSI_MIS_RORMIS          0x00000001  // SSI Receive Overrun Masked
190                                            // Interrupt Status
191
192//*****************************************************************************
193//
194// The following are defines for the bit fields in the SSI_O_ICR register.
195//
196//*****************************************************************************
197#define SSI_ICR_EOTIC           0x00000040  // End of Transmit Interrupt Clear
198#define SSI_ICR_DMATXIC         0x00000020  // SSI Transmit DMA Interrupt Clear
199#define SSI_ICR_DMARXIC         0x00000010  // SSI Receive DMA Interrupt Clear
200#define SSI_ICR_RTIC            0x00000002  // SSI Receive Time-Out Interrupt
201                                            // Clear
202#define SSI_ICR_RORIC           0x00000001  // SSI Receive Overrun Interrupt
203                                            // Clear
204
205//*****************************************************************************
206//
207// The following are defines for the bit fields in the SSI_O_DMACTL register.
208//
209//*****************************************************************************
210#define SSI_DMACTL_TXDMAE       0x00000002  // Transmit DMA Enable
211#define SSI_DMACTL_RXDMAE       0x00000001  // Receive DMA Enable
212
213//*****************************************************************************
214//
215// The following are defines for the bit fields in the SSI_O_PP register.
216//
217//*****************************************************************************
218#define SSI_PP_FSSHLDFRM        0x00000008  // FSS Hold Frame Capability
219#define SSI_PP_MODE_M           0x00000006  // Mode of Operation
220#define SSI_PP_MODE_LEGACY      0x00000000  // Legacy SSI mode
221#define SSI_PP_MODE_ADVBI       0x00000002  // Legacy mode, Advanced SSI mode
222                                            // and Bi-SSI mode enabled
223#define SSI_PP_MODE_ADVBIQUAD   0x00000004  // Legacy mode, Advanced mode,
224                                            // Bi-SSI and Quad-SSI mode enabled
225#define SSI_PP_HSCLK            0x00000001  // High Speed Capability
226
227//*****************************************************************************
228//
229// The following are defines for the bit fields in the SSI_O_CC register.
230//
231//*****************************************************************************
232#define SSI_CC_CS_M             0x0000000F  // SSI Baud Clock Source
233#define SSI_CC_CS_SYSPLL        0x00000000  // System clock (based on clock
234                                            // source and divisor factor)
235#define SSI_CC_CS_PIOSC         0x00000005  // PIOSC
236
237#endif // __HW_SSI_H__