+/rtos
git clone https://git.julia.blue/+/rtos
4786702
master
1//***************************************************************************** 2// 3// hw_uart.h - Macros and defines used when accessing the UART hardware. 4// 5// Copyright (c) 2005-2017 Texas Instruments Incorporated. All rights reserved. 6// Software License Agreement 7// 8// Redistribution and use in source and binary forms, with or without 9// modification, are permitted provided that the following conditions 10// are met: 11// 12// Redistributions of source code must retain the above copyright 13// notice, this list of conditions and the following disclaimer. 14// 15// Redistributions in binary form must reproduce the above copyright 16// notice, this list of conditions and the following disclaimer in the 17// documentation and/or other materials provided with the 18// distribution. 19// 20// Neither the name of Texas Instruments Incorporated nor the names of 21// its contributors may be used to endorse or promote products derived 22// from this software without specific prior written permission. 23// 24// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 25// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 26// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 27// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 28// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 29// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 30// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 31// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 32// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 33// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 34// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 35// 36// This is part of revision 2.1.4.178 of the Tiva Firmware Development Package. 37// 38//***************************************************************************** 39 40#ifndef __HW_UART_H__ 41#define __HW_UART_H__ 42 43//***************************************************************************** 44// 45// The following are defines for the UART register offsets. 46// 47//***************************************************************************** 48#define UART_O_DR 0x00000000 // UART Data 49#define UART_O_RSR 0x00000004 // UART Receive Status/Error Clear 50#define UART_O_ECR 0x00000004 // UART Receive Status/Error Clear 51#define UART_O_FR 0x00000018 // UART Flag 52#define UART_O_ILPR 0x00000020 // UART IrDA Low-Power Register 53#define UART_O_IBRD 0x00000024 // UART Integer Baud-Rate Divisor 54#define UART_O_FBRD 0x00000028 // UART Fractional Baud-Rate 55// Divisor 56#define UART_O_LCRH 0x0000002C // UART Line Control 57#define UART_O_CTL 0x00000030 // UART Control 58#define UART_O_IFLS 0x00000034 // UART Interrupt FIFO Level Select 59#define UART_O_IM 0x00000038 // UART Interrupt Mask 60#define UART_O_RIS 0x0000003C // UART Raw Interrupt Status 61#define UART_O_MIS 0x00000040 // UART Masked Interrupt Status 62#define UART_O_ICR 0x00000044 // UART Interrupt Clear 63#define UART_O_DMACTL 0x00000048 // UART DMA Control 64#define UART_O_9BITADDR 0x000000A4 // UART 9-Bit Self Address 65#define UART_O_9BITAMASK 0x000000A8 // UART 9-Bit Self Address Mask 66#define UART_O_PP 0x00000FC0 // UART Peripheral Properties 67#define UART_O_CC 0x00000FC8 // UART Clock Configuration 68 69//***************************************************************************** 70// 71// The following are defines for the bit fields in the UART_O_DR register. 72// 73//***************************************************************************** 74#define UART_DR_OE 0x00000800 // UART Overrun Error 75#define UART_DR_BE 0x00000400 // UART Break Error 76#define UART_DR_PE 0x00000200 // UART Parity Error 77#define UART_DR_FE 0x00000100 // UART Framing Error 78#define UART_DR_DATA_M 0x000000FF // Data Transmitted or Received 79#define UART_DR_DATA_S 0 80 81//***************************************************************************** 82// 83// The following are defines for the bit fields in the UART_O_RSR register. 84// 85//***************************************************************************** 86#define UART_RSR_OE 0x00000008 // UART Overrun Error 87#define UART_RSR_BE 0x00000004 // UART Break Error 88#define UART_RSR_PE 0x00000002 // UART Parity Error 89#define UART_RSR_FE 0x00000001 // UART Framing Error 90 91//***************************************************************************** 92// 93// The following are defines for the bit fields in the UART_O_ECR register. 94// 95//***************************************************************************** 96#define UART_ECR_DATA_M 0x000000FF // Error Clear 97#define UART_ECR_DATA_S 0 98 99//***************************************************************************** 100// 101// The following are defines for the bit fields in the UART_O_FR register. 102// 103//***************************************************************************** 104#define UART_FR_RI 0x00000100 // Ring Indicator 105#define UART_FR_TXFE 0x00000080 // UART Transmit FIFO Empty 106#define UART_FR_RXFF 0x00000040 // UART Receive FIFO Full 107#define UART_FR_TXFF 0x00000020 // UART Transmit FIFO Full 108#define UART_FR_RXFE 0x00000010 // UART Receive FIFO Empty 109#define UART_FR_BUSY 0x00000008 // UART Busy 110#define UART_FR_DCD 0x00000004 // Data Carrier Detect 111#define UART_FR_DSR 0x00000002 // Data Set Ready 112#define UART_FR_CTS 0x00000001 // Clear To Send 113 114//***************************************************************************** 115// 116// The following are defines for the bit fields in the UART_O_ILPR register. 117// 118//***************************************************************************** 119#define UART_ILPR_ILPDVSR_M 0x000000FF // IrDA Low-Power Divisor 120#define UART_ILPR_ILPDVSR_S 0 121 122//***************************************************************************** 123// 124// The following are defines for the bit fields in the UART_O_IBRD register. 125// 126//***************************************************************************** 127#define UART_IBRD_DIVINT_M 0x0000FFFF // Integer Baud-Rate Divisor 128#define UART_IBRD_DIVINT_S 0 129 130//***************************************************************************** 131// 132// The following are defines for the bit fields in the UART_O_FBRD register. 133// 134//***************************************************************************** 135#define UART_FBRD_DIVFRAC_M 0x0000003F // Fractional Baud-Rate Divisor 136#define UART_FBRD_DIVFRAC_S 0 137 138//***************************************************************************** 139// 140// The following are defines for the bit fields in the UART_O_LCRH register. 141// 142//***************************************************************************** 143#define UART_LCRH_SPS 0x00000080 // UART Stick Parity Select 144#define UART_LCRH_WLEN_M 0x00000060 // UART Word Length 145#define UART_LCRH_WLEN_5 0x00000000 // 5 bits (default) 146#define UART_LCRH_WLEN_6 0x00000020 // 6 bits 147#define UART_LCRH_WLEN_7 0x00000040 // 7 bits 148#define UART_LCRH_WLEN_8 0x00000060 // 8 bits 149#define UART_LCRH_FEN 0x00000010 // UART Enable FIFOs 150#define UART_LCRH_STP2 0x00000008 // UART Two Stop Bits Select 151#define UART_LCRH_EPS 0x00000004 // UART Even Parity Select 152#define UART_LCRH_PEN 0x00000002 // UART Parity Enable 153#define UART_LCRH_BRK 0x00000001 // UART Send Break 154 155//***************************************************************************** 156// 157// The following are defines for the bit fields in the UART_O_CTL register. 158// 159//***************************************************************************** 160#define UART_CTL_CTSEN 0x00008000 // Enable Clear To Send 161#define UART_CTL_RTSEN 0x00004000 // Enable Request to Send 162#define UART_CTL_RTS 0x00000800 // Request to Send 163#define UART_CTL_DTR 0x00000400 // Data Terminal Ready 164#define UART_CTL_RXE 0x00000200 // UART Receive Enable 165#define UART_CTL_TXE 0x00000100 // UART Transmit Enable 166#define UART_CTL_LBE 0x00000080 // UART Loop Back Enable 167#define UART_CTL_HSE 0x00000020 // High-Speed Enable 168#define UART_CTL_EOT 0x00000010 // End of Transmission 169#define UART_CTL_SMART 0x00000008 // ISO 7816 Smart Card Support 170#define UART_CTL_SIRLP 0x00000004 // UART SIR Low-Power Mode 171#define UART_CTL_SIREN 0x00000002 // UART SIR Enable 172#define UART_CTL_UARTEN 0x00000001 // UART Enable 173 174//***************************************************************************** 175// 176// The following are defines for the bit fields in the UART_O_IFLS register. 177// 178//***************************************************************************** 179#define UART_IFLS_RX_M 0x00000038 // UART Receive Interrupt FIFO 180// Level Select 181#define UART_IFLS_RX1_8 0x00000000 // RX FIFO >= 1/8 full 182#define UART_IFLS_RX2_8 0x00000008 // RX FIFO >= 1/4 full 183#define UART_IFLS_RX4_8 0x00000010 // RX FIFO >= 1/2 full (default) 184#define UART_IFLS_RX6_8 0x00000018 // RX FIFO >= 3/4 full 185#define UART_IFLS_RX7_8 0x00000020 // RX FIFO >= 7/8 full 186#define UART_IFLS_TX_M 0x00000007 // UART Transmit Interrupt FIFO 187// Level Select 188#define UART_IFLS_TX1_8 0x00000000 // TX FIFO <= 1/8 full 189#define UART_IFLS_TX2_8 0x00000001 // TX FIFO <= 1/4 full 190#define UART_IFLS_TX4_8 0x00000002 // TX FIFO <= 1/2 full (default) 191#define UART_IFLS_TX6_8 0x00000003 // TX FIFO <= 3/4 full 192#define UART_IFLS_TX7_8 0x00000004 // TX FIFO <= 7/8 full 193 194//***************************************************************************** 195// 196// The following are defines for the bit fields in the UART_O_IM register. 197// 198//***************************************************************************** 199#define UART_IM_DMATXIM 0x00020000 // Transmit DMA Interrupt Mask 200#define UART_IM_DMARXIM 0x00010000 // Receive DMA Interrupt Mask 201#define UART_IM_9BITIM 0x00001000 // 9-Bit Mode Interrupt Mask 202#define UART_IM_EOTIM 0x00000800 // End of Transmission Interrupt 203// Mask 204#define UART_IM_OEIM 0x00000400 // UART Overrun Error Interrupt 205// Mask 206#define UART_IM_BEIM 0x00000200 // UART Break Error Interrupt Mask 207#define UART_IM_PEIM 0x00000100 // UART Parity Error Interrupt Mask 208#define UART_IM_FEIM 0x00000080 // UART Framing Error Interrupt 209// Mask 210#define UART_IM_RTIM 0x00000040 // UART Receive Time-Out Interrupt 211// Mask 212#define UART_IM_TXIM 0x00000020 // UART Transmit Interrupt Mask 213#define UART_IM_RXIM 0x00000010 // UART Receive Interrupt Mask 214#define UART_IM_DSRMIM 0x00000008 // UART Data Set Ready Modem 215// Interrupt Mask 216#define UART_IM_DCDMIM 0x00000004 // UART Data Carrier Detect Modem 217// Interrupt Mask 218#define UART_IM_CTSMIM 0x00000002 // UART Clear to Send Modem 219// Interrupt Mask 220#define UART_IM_RIMIM 0x00000001 // UART Ring Indicator Modem 221// Interrupt Mask 222 223//***************************************************************************** 224// 225// The following are defines for the bit fields in the UART_O_RIS register. 226// 227//***************************************************************************** 228#define UART_RIS_DMATXRIS 0x00020000 // Transmit DMA Raw Interrupt 229// Status 230#define UART_RIS_DMARXRIS 0x00010000 // Receive DMA Raw Interrupt Status 231#define UART_RIS_9BITRIS 0x00001000 // 9-Bit Mode Raw Interrupt Status 232#define UART_RIS_EOTRIS 0x00000800 // End of Transmission Raw 233// Interrupt Status 234#define UART_RIS_OERIS 0x00000400 // UART Overrun Error Raw Interrupt 235// Status 236#define UART_RIS_BERIS 0x00000200 // UART Break Error Raw Interrupt 237// Status 238#define UART_RIS_PERIS 0x00000100 // UART Parity Error Raw Interrupt 239// Status 240#define UART_RIS_FERIS 0x00000080 // UART Framing Error Raw Interrupt 241// Status 242#define UART_RIS_RTRIS 0x00000040 // UART Receive Time-Out Raw 243// Interrupt Status 244#define UART_RIS_TXRIS 0x00000020 // UART Transmit Raw Interrupt 245// Status 246#define UART_RIS_RXRIS 0x00000010 // UART Receive Raw Interrupt 247// Status 248#define UART_RIS_DSRRIS 0x00000008 // UART Data Set Ready Modem Raw 249// Interrupt Status 250#define UART_RIS_DCDRIS 0x00000004 // UART Data Carrier Detect Modem 251// Raw Interrupt Status 252#define UART_RIS_CTSRIS 0x00000002 // UART Clear to Send Modem Raw 253// Interrupt Status 254#define UART_RIS_RIRIS 0x00000001 // UART Ring Indicator Modem Raw 255// Interrupt Status 256 257//***************************************************************************** 258// 259// The following are defines for the bit fields in the UART_O_MIS register. 260// 261//***************************************************************************** 262#define UART_MIS_DMATXMIS 0x00020000 // Transmit DMA Masked Interrupt 263// Status 264#define UART_MIS_DMARXMIS 0x00010000 // Receive DMA Masked Interrupt 265// Status 266#define UART_MIS_9BITMIS 0x00001000 // 9-Bit Mode Masked Interrupt 267// Status 268#define UART_MIS_EOTMIS 0x00000800 // End of Transmission Masked 269// Interrupt Status 270#define UART_MIS_OEMIS 0x00000400 // UART Overrun Error Masked 271// Interrupt Status 272#define UART_MIS_BEMIS 0x00000200 // UART Break Error Masked 273// Interrupt Status 274#define UART_MIS_PEMIS 0x00000100 // UART Parity Error Masked 275// Interrupt Status 276#define UART_MIS_FEMIS 0x00000080 // UART Framing Error Masked 277// Interrupt Status 278#define UART_MIS_RTMIS 0x00000040 // UART Receive Time-Out Masked 279// Interrupt Status 280#define UART_MIS_TXMIS 0x00000020 // UART Transmit Masked Interrupt 281// Status 282#define UART_MIS_RXMIS 0x00000010 // UART Receive Masked Interrupt 283// Status 284#define UART_MIS_DSRMIS 0x00000008 // UART Data Set Ready Modem Masked 285// Interrupt Status 286#define UART_MIS_DCDMIS 0x00000004 // UART Data Carrier Detect Modem 287// Masked Interrupt Status 288#define UART_MIS_CTSMIS 0x00000002 // UART Clear to Send Modem Masked 289// Interrupt Status 290#define UART_MIS_RIMIS 0x00000001 // UART Ring Indicator Modem Masked 291// Interrupt Status 292 293//***************************************************************************** 294// 295// The following are defines for the bit fields in the UART_O_ICR register. 296// 297//***************************************************************************** 298#define UART_ICR_DMATXIC 0x00020000 // Transmit DMA Interrupt Clear 299#define UART_ICR_DMARXIC 0x00010000 // Receive DMA Interrupt Clear 300#define UART_ICR_9BITIC 0x00001000 // 9-Bit Mode Interrupt Clear 301#define UART_ICR_EOTIC 0x00000800 // End of Transmission Interrupt 302// Clear 303#define UART_ICR_OEIC 0x00000400 // Overrun Error Interrupt Clear 304#define UART_ICR_BEIC 0x00000200 // Break Error Interrupt Clear 305#define UART_ICR_PEIC 0x00000100 // Parity Error Interrupt Clear 306#define UART_ICR_FEIC 0x00000080 // Framing Error Interrupt Clear 307#define UART_ICR_RTIC 0x00000040 // Receive Time-Out Interrupt Clear 308#define UART_ICR_TXIC 0x00000020 // Transmit Interrupt Clear 309#define UART_ICR_RXIC 0x00000010 // Receive Interrupt Clear 310#define UART_ICR_DSRMIC 0x00000008 // UART Data Set Ready Modem 311// Interrupt Clear 312#define UART_ICR_DCDMIC 0x00000004 // UART Data Carrier Detect Modem 313// Interrupt Clear 314#define UART_ICR_CTSMIC 0x00000002 // UART Clear to Send Modem 315// Interrupt Clear 316#define UART_ICR_RIMIC 0x00000001 // UART Ring Indicator Modem 317// Interrupt Clear 318 319//***************************************************************************** 320// 321// The following are defines for the bit fields in the UART_O_DMACTL register. 322// 323//***************************************************************************** 324#define UART_DMACTL_DMAERR 0x00000004 // DMA on Error 325#define UART_DMACTL_TXDMAE 0x00000002 // Transmit DMA Enable 326#define UART_DMACTL_RXDMAE 0x00000001 // Receive DMA Enable 327 328//***************************************************************************** 329// 330// The following are defines for the bit fields in the UART_O_9BITADDR 331// register. 332// 333//***************************************************************************** 334#define UART_9BITADDR_9BITEN 0x00008000 // Enable 9-Bit Mode 335#define UART_9BITADDR_ADDR_M 0x000000FF // Self Address for 9-Bit Mode 336#define UART_9BITADDR_ADDR_S 0 337 338//***************************************************************************** 339// 340// The following are defines for the bit fields in the UART_O_9BITAMASK 341// register. 342// 343//***************************************************************************** 344#define UART_9BITAMASK_MASK_M 0x000000FF // Self Address Mask for 9-Bit Mode 345#define UART_9BITAMASK_MASK_S 0 346 347//***************************************************************************** 348// 349// The following are defines for the bit fields in the UART_O_PP register. 350// 351//***************************************************************************** 352#define UART_PP_MSE 0x00000008 // Modem Support Extended 353#define UART_PP_MS 0x00000004 // Modem Support 354#define UART_PP_NB 0x00000002 // 9-Bit Support 355#define UART_PP_SC 0x00000001 // Smart Card Support 356 357//***************************************************************************** 358// 359// The following are defines for the bit fields in the UART_O_CC register. 360// 361//***************************************************************************** 362#define UART_CC_CS_M 0x0000000F // UART Baud Clock Source 363#define UART_CC_CS_SYSCLK 0x00000000 // System clock (based on clock 364// source and divisor factor) 365#define UART_CC_CS_PIOSC 0x00000005 // PIOSC 366 367#endif // __HW_UART_H__