+/rtos
git clone https://git.julia.blue/+/rtos
da8d6f3
master
1//***************************************************************************** 2// 3// hw_usb.h - Macros for use in accessing the USB registers. 4// 5// Copyright (c) 2007-2017 Texas Instruments Incorporated. All rights reserved. 6// Software License Agreement 7// 8// Redistribution and use in source and binary forms, with or without 9// modification, are permitted provided that the following conditions 10// are met: 11// 12// Redistributions of source code must retain the above copyright 13// notice, this list of conditions and the following disclaimer. 14// 15// Redistributions in binary form must reproduce the above copyright 16// notice, this list of conditions and the following disclaimer in the 17// documentation and/or other materials provided with the 18// distribution. 19// 20// Neither the name of Texas Instruments Incorporated nor the names of 21// its contributors may be used to endorse or promote products derived 22// from this software without specific prior written permission. 23// 24// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 25// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 26// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 27// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 28// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 29// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 30// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 31// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 32// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 33// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 34// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 35// 36// This is part of revision 2.1.4.178 of the Tiva Firmware Development Package. 37// 38//***************************************************************************** 39 40#ifndef __HW_USB_H__ 41#define __HW_USB_H__ 42 43//***************************************************************************** 44// 45// The following are defines for the Univeral Serial Bus register offsets. 46// 47//***************************************************************************** 48#define USB_O_FADDR 0x00000000 // USB Device Functional Address 49#define USB_O_POWER 0x00000001 // USB Power 50#define USB_O_TXIS 0x00000002 // USB Transmit Interrupt Status 51#define USB_O_RXIS 0x00000004 // USB Receive Interrupt Status 52#define USB_O_TXIE 0x00000006 // USB Transmit Interrupt Enable 53#define USB_O_RXIE 0x00000008 // USB Receive Interrupt Enable 54#define USB_O_IS 0x0000000A // USB General Interrupt Status 55#define USB_O_IE 0x0000000B // USB Interrupt Enable 56#define USB_O_FRAME 0x0000000C // USB Frame Value 57#define USB_O_EPIDX 0x0000000E // USB Endpoint Index 58#define USB_O_TEST 0x0000000F // USB Test Mode 59#define USB_O_FIFO0 0x00000020 // USB FIFO Endpoint 0 60#define USB_O_FIFO1 0x00000024 // USB FIFO Endpoint 1 61#define USB_O_FIFO2 0x00000028 // USB FIFO Endpoint 2 62#define USB_O_FIFO3 0x0000002C // USB FIFO Endpoint 3 63#define USB_O_FIFO4 0x00000030 // USB FIFO Endpoint 4 64#define USB_O_FIFO5 0x00000034 // USB FIFO Endpoint 5 65#define USB_O_FIFO6 0x00000038 // USB FIFO Endpoint 6 66#define USB_O_FIFO7 0x0000003C // USB FIFO Endpoint 7 67#define USB_O_DEVCTL 0x00000060 // USB Device Control 68#define USB_O_CCONF 0x00000061 // USB Common Configuration 69#define USB_O_TXFIFOSZ 0x00000062 // USB Transmit Dynamic FIFO Sizing 70#define USB_O_RXFIFOSZ 0x00000063 // USB Receive Dynamic FIFO Sizing 71#define USB_O_TXFIFOADD 0x00000064 // USB Transmit FIFO Start Address 72#define USB_O_RXFIFOADD 0x00000066 // USB Receive FIFO Start Address 73#define USB_O_ULPIVBUSCTL 0x00000070 // USB ULPI VBUS Control 74#define USB_O_ULPIREGDATA 0x00000074 // USB ULPI Register Data 75#define USB_O_ULPIREGADDR 0x00000075 // USB ULPI Register Address 76#define USB_O_ULPIREGCTL 0x00000076 // USB ULPI Register Control 77#define USB_O_EPINFO 0x00000078 // USB Endpoint Information 78#define USB_O_RAMINFO 0x00000079 // USB RAM Information 79#define USB_O_CONTIM 0x0000007A // USB Connect Timing 80#define USB_O_VPLEN 0x0000007B // USB OTG VBUS Pulse Timing 81#define USB_O_HSEOF \ 82 0x0000007C // USB High-Speed Last Transaction 83// to End of Frame Timing 84#define USB_O_FSEOF \ 85 0x0000007D // USB Full-Speed Last Transaction 86// to End of Frame Timing 87#define USB_O_LSEOF \ 88 0x0000007E // USB Low-Speed Last Transaction 89// to End of Frame Timing 90#define USB_O_TXFUNCADDR0 \ 91 0x00000080 // USB Transmit Functional Address 92// Endpoint 0 93#define USB_O_TXHUBADDR0 \ 94 0x00000082 // USB Transmit Hub Address 95// Endpoint 0 96#define USB_O_TXHUBPORT0 0x00000083 // USB Transmit Hub Port Endpoint 0 97#define USB_O_TXFUNCADDR1 \ 98 0x00000088 // USB Transmit Functional Address 99// Endpoint 1 100#define USB_O_TXHUBADDR1 \ 101 0x0000008A // USB Transmit Hub Address 102// Endpoint 1 103#define USB_O_TXHUBPORT1 0x0000008B // USB Transmit Hub Port Endpoint 1 104#define USB_O_RXFUNCADDR1 \ 105 0x0000008C // USB Receive Functional Address 106// Endpoint 1 107#define USB_O_RXHUBADDR1 \ 108 0x0000008E // USB Receive Hub Address Endpoint 109// 1 110#define USB_O_RXHUBPORT1 0x0000008F // USB Receive Hub Port Endpoint 1 111#define USB_O_TXFUNCADDR2 \ 112 0x00000090 // USB Transmit Functional Address 113// Endpoint 2 114#define USB_O_TXHUBADDR2 \ 115 0x00000092 // USB Transmit Hub Address 116// Endpoint 2 117#define USB_O_TXHUBPORT2 0x00000093 // USB Transmit Hub Port Endpoint 2 118#define USB_O_RXFUNCADDR2 \ 119 0x00000094 // USB Receive Functional Address 120// Endpoint 2 121#define USB_O_RXHUBADDR2 \ 122 0x00000096 // USB Receive Hub Address Endpoint 123// 2 124#define USB_O_RXHUBPORT2 0x00000097 // USB Receive Hub Port Endpoint 2 125#define USB_O_TXFUNCADDR3 \ 126 0x00000098 // USB Transmit Functional Address 127// Endpoint 3 128#define USB_O_TXHUBADDR3 \ 129 0x0000009A // USB Transmit Hub Address 130// Endpoint 3 131#define USB_O_TXHUBPORT3 0x0000009B // USB Transmit Hub Port Endpoint 3 132#define USB_O_RXFUNCADDR3 \ 133 0x0000009C // USB Receive Functional Address 134// Endpoint 3 135#define USB_O_RXHUBADDR3 \ 136 0x0000009E // USB Receive Hub Address Endpoint 137// 3 138#define USB_O_RXHUBPORT3 0x0000009F // USB Receive Hub Port Endpoint 3 139#define USB_O_TXFUNCADDR4 \ 140 0x000000A0 // USB Transmit Functional Address 141// Endpoint 4 142#define USB_O_TXHUBADDR4 \ 143 0x000000A2 // USB Transmit Hub Address 144// Endpoint 4 145#define USB_O_TXHUBPORT4 0x000000A3 // USB Transmit Hub Port Endpoint 4 146#define USB_O_RXFUNCADDR4 \ 147 0x000000A4 // USB Receive Functional Address 148// Endpoint 4 149#define USB_O_RXHUBADDR4 \ 150 0x000000A6 // USB Receive Hub Address Endpoint 151// 4 152#define USB_O_RXHUBPORT4 0x000000A7 // USB Receive Hub Port Endpoint 4 153#define USB_O_TXFUNCADDR5 \ 154 0x000000A8 // USB Transmit Functional Address 155// Endpoint 5 156#define USB_O_TXHUBADDR5 \ 157 0x000000AA // USB Transmit Hub Address 158// Endpoint 5 159#define USB_O_TXHUBPORT5 0x000000AB // USB Transmit Hub Port Endpoint 5 160#define USB_O_RXFUNCADDR5 \ 161 0x000000AC // USB Receive Functional Address 162// Endpoint 5 163#define USB_O_RXHUBADDR5 \ 164 0x000000AE // USB Receive Hub Address Endpoint 165// 5 166#define USB_O_RXHUBPORT5 0x000000AF // USB Receive Hub Port Endpoint 5 167#define USB_O_TXFUNCADDR6 \ 168 0x000000B0 // USB Transmit Functional Address 169// Endpoint 6 170#define USB_O_TXHUBADDR6 \ 171 0x000000B2 // USB Transmit Hub Address 172// Endpoint 6 173#define USB_O_TXHUBPORT6 0x000000B3 // USB Transmit Hub Port Endpoint 6 174#define USB_O_RXFUNCADDR6 \ 175 0x000000B4 // USB Receive Functional Address 176// Endpoint 6 177#define USB_O_RXHUBADDR6 \ 178 0x000000B6 // USB Receive Hub Address Endpoint 179// 6 180#define USB_O_RXHUBPORT6 0x000000B7 // USB Receive Hub Port Endpoint 6 181#define USB_O_TXFUNCADDR7 \ 182 0x000000B8 // USB Transmit Functional Address 183// Endpoint 7 184#define USB_O_TXHUBADDR7 \ 185 0x000000BA // USB Transmit Hub Address 186// Endpoint 7 187#define USB_O_TXHUBPORT7 0x000000BB // USB Transmit Hub Port Endpoint 7 188#define USB_O_RXFUNCADDR7 \ 189 0x000000BC // USB Receive Functional Address 190// Endpoint 7 191#define USB_O_RXHUBADDR7 \ 192 0x000000BE // USB Receive Hub Address Endpoint 193// 7 194#define USB_O_RXHUBPORT7 0x000000BF // USB Receive Hub Port Endpoint 7 195#define USB_O_CSRL0 \ 196 0x00000102 // USB Control and Status Endpoint 197// 0 Low 198#define USB_O_CSRH0 \ 199 0x00000103 // USB Control and Status Endpoint 200// 0 High 201#define USB_O_COUNT0 \ 202 0x00000108 // USB Receive Byte Count Endpoint 203// 0 204#define USB_O_TYPE0 0x0000010A // USB Type Endpoint 0 205#define USB_O_NAKLMT 0x0000010B // USB NAK Limit 206#define USB_O_TXMAXP1 \ 207 0x00000110 // USB Maximum Transmit Data 208// Endpoint 1 209#define USB_O_TXCSRL1 \ 210 0x00000112 // USB Transmit Control and Status 211// Endpoint 1 Low 212#define USB_O_TXCSRH1 \ 213 0x00000113 // USB Transmit Control and Status 214// Endpoint 1 High 215#define USB_O_RXMAXP1 \ 216 0x00000114 // USB Maximum Receive Data 217// Endpoint 1 218#define USB_O_RXCSRL1 \ 219 0x00000116 // USB Receive Control and Status 220// Endpoint 1 Low 221#define USB_O_RXCSRH1 \ 222 0x00000117 // USB Receive Control and Status 223// Endpoint 1 High 224#define USB_O_RXCOUNT1 \ 225 0x00000118 // USB Receive Byte Count Endpoint 226// 1 227#define USB_O_TXTYPE1 \ 228 0x0000011A // USB Host Transmit Configure Type 229// Endpoint 1 230#define USB_O_TXINTERVAL1 \ 231 0x0000011B // USB Host Transmit Interval 232// Endpoint 1 233#define USB_O_RXTYPE1 \ 234 0x0000011C // USB Host Configure Receive Type 235// Endpoint 1 236#define USB_O_RXINTERVAL1 \ 237 0x0000011D // USB Host Receive Polling 238// Interval Endpoint 1 239#define USB_O_TXMAXP2 \ 240 0x00000120 // USB Maximum Transmit Data 241// Endpoint 2 242#define USB_O_TXCSRL2 \ 243 0x00000122 // USB Transmit Control and Status 244// Endpoint 2 Low 245#define USB_O_TXCSRH2 \ 246 0x00000123 // USB Transmit Control and Status 247// Endpoint 2 High 248#define USB_O_RXMAXP2 \ 249 0x00000124 // USB Maximum Receive Data 250// Endpoint 2 251#define USB_O_RXCSRL2 \ 252 0x00000126 // USB Receive Control and Status 253// Endpoint 2 Low 254#define USB_O_RXCSRH2 \ 255 0x00000127 // USB Receive Control and Status 256// Endpoint 2 High 257#define USB_O_RXCOUNT2 \ 258 0x00000128 // USB Receive Byte Count Endpoint 259// 2 260#define USB_O_TXTYPE2 \ 261 0x0000012A // USB Host Transmit Configure Type 262// Endpoint 2 263#define USB_O_TXINTERVAL2 \ 264 0x0000012B // USB Host Transmit Interval 265// Endpoint 2 266#define USB_O_RXTYPE2 \ 267 0x0000012C // USB Host Configure Receive Type 268// Endpoint 2 269#define USB_O_RXINTERVAL2 \ 270 0x0000012D // USB Host Receive Polling 271// Interval Endpoint 2 272#define USB_O_TXMAXP3 \ 273 0x00000130 // USB Maximum Transmit Data 274// Endpoint 3 275#define USB_O_TXCSRL3 \ 276 0x00000132 // USB Transmit Control and Status 277// Endpoint 3 Low 278#define USB_O_TXCSRH3 \ 279 0x00000133 // USB Transmit Control and Status 280// Endpoint 3 High 281#define USB_O_RXMAXP3 \ 282 0x00000134 // USB Maximum Receive Data 283// Endpoint 3 284#define USB_O_RXCSRL3 \ 285 0x00000136 // USB Receive Control and Status 286// Endpoint 3 Low 287#define USB_O_RXCSRH3 \ 288 0x00000137 // USB Receive Control and Status 289// Endpoint 3 High 290#define USB_O_RXCOUNT3 \ 291 0x00000138 // USB Receive Byte Count Endpoint 292// 3 293#define USB_O_TXTYPE3 \ 294 0x0000013A // USB Host Transmit Configure Type 295// Endpoint 3 296#define USB_O_TXINTERVAL3 \ 297 0x0000013B // USB Host Transmit Interval 298// Endpoint 3 299#define USB_O_RXTYPE3 \ 300 0x0000013C // USB Host Configure Receive Type 301// Endpoint 3 302#define USB_O_RXINTERVAL3 \ 303 0x0000013D // USB Host Receive Polling 304// Interval Endpoint 3 305#define USB_O_TXMAXP4 \ 306 0x00000140 // USB Maximum Transmit Data 307// Endpoint 4 308#define USB_O_TXCSRL4 \ 309 0x00000142 // USB Transmit Control and Status 310// Endpoint 4 Low 311#define USB_O_TXCSRH4 \ 312 0x00000143 // USB Transmit Control and Status 313// Endpoint 4 High 314#define USB_O_RXMAXP4 \ 315 0x00000144 // USB Maximum Receive Data 316// Endpoint 4 317#define USB_O_RXCSRL4 \ 318 0x00000146 // USB Receive Control and Status 319// Endpoint 4 Low 320#define USB_O_RXCSRH4 \ 321 0x00000147 // USB Receive Control and Status 322// Endpoint 4 High 323#define USB_O_RXCOUNT4 \ 324 0x00000148 // USB Receive Byte Count Endpoint 325// 4 326#define USB_O_TXTYPE4 \ 327 0x0000014A // USB Host Transmit Configure Type 328// Endpoint 4 329#define USB_O_TXINTERVAL4 \ 330 0x0000014B // USB Host Transmit Interval 331// Endpoint 4 332#define USB_O_RXTYPE4 \ 333 0x0000014C // USB Host Configure Receive Type 334// Endpoint 4 335#define USB_O_RXINTERVAL4 \ 336 0x0000014D // USB Host Receive Polling 337// Interval Endpoint 4 338#define USB_O_TXMAXP5 \ 339 0x00000150 // USB Maximum Transmit Data 340// Endpoint 5 341#define USB_O_TXCSRL5 \ 342 0x00000152 // USB Transmit Control and Status 343// Endpoint 5 Low 344#define USB_O_TXCSRH5 \ 345 0x00000153 // USB Transmit Control and Status 346// Endpoint 5 High 347#define USB_O_RXMAXP5 \ 348 0x00000154 // USB Maximum Receive Data 349// Endpoint 5 350#define USB_O_RXCSRL5 \ 351 0x00000156 // USB Receive Control and Status 352// Endpoint 5 Low 353#define USB_O_RXCSRH5 \ 354 0x00000157 // USB Receive Control and Status 355// Endpoint 5 High 356#define USB_O_RXCOUNT5 \ 357 0x00000158 // USB Receive Byte Count Endpoint 358// 5 359#define USB_O_TXTYPE5 \ 360 0x0000015A // USB Host Transmit Configure Type 361// Endpoint 5 362#define USB_O_TXINTERVAL5 \ 363 0x0000015B // USB Host Transmit Interval 364// Endpoint 5 365#define USB_O_RXTYPE5 \ 366 0x0000015C // USB Host Configure Receive Type 367// Endpoint 5 368#define USB_O_RXINTERVAL5 \ 369 0x0000015D // USB Host Receive Polling 370// Interval Endpoint 5 371#define USB_O_TXMAXP6 \ 372 0x00000160 // USB Maximum Transmit Data 373// Endpoint 6 374#define USB_O_TXCSRL6 \ 375 0x00000162 // USB Transmit Control and Status 376// Endpoint 6 Low 377#define USB_O_TXCSRH6 \ 378 0x00000163 // USB Transmit Control and Status 379// Endpoint 6 High 380#define USB_O_RXMAXP6 \ 381 0x00000164 // USB Maximum Receive Data 382// Endpoint 6 383#define USB_O_RXCSRL6 \ 384 0x00000166 // USB Receive Control and Status 385// Endpoint 6 Low 386#define USB_O_RXCSRH6 \ 387 0x00000167 // USB Receive Control and Status 388// Endpoint 6 High 389#define USB_O_RXCOUNT6 \ 390 0x00000168 // USB Receive Byte Count Endpoint 391// 6 392#define USB_O_TXTYPE6 \ 393 0x0000016A // USB Host Transmit Configure Type 394// Endpoint 6 395#define USB_O_TXINTERVAL6 \ 396 0x0000016B // USB Host Transmit Interval 397// Endpoint 6 398#define USB_O_RXTYPE6 \ 399 0x0000016C // USB Host Configure Receive Type 400// Endpoint 6 401#define USB_O_RXINTERVAL6 \ 402 0x0000016D // USB Host Receive Polling 403// Interval Endpoint 6 404#define USB_O_TXMAXP7 \ 405 0x00000170 // USB Maximum Transmit Data 406// Endpoint 7 407#define USB_O_TXCSRL7 \ 408 0x00000172 // USB Transmit Control and Status 409// Endpoint 7 Low 410#define USB_O_TXCSRH7 \ 411 0x00000173 // USB Transmit Control and Status 412// Endpoint 7 High 413#define USB_O_RXMAXP7 \ 414 0x00000174 // USB Maximum Receive Data 415// Endpoint 7 416#define USB_O_RXCSRL7 \ 417 0x00000176 // USB Receive Control and Status 418// Endpoint 7 Low 419#define USB_O_RXCSRH7 \ 420 0x00000177 // USB Receive Control and Status 421// Endpoint 7 High 422#define USB_O_RXCOUNT7 \ 423 0x00000178 // USB Receive Byte Count Endpoint 424// 7 425#define USB_O_TXTYPE7 \ 426 0x0000017A // USB Host Transmit Configure Type 427// Endpoint 7 428#define USB_O_TXINTERVAL7 \ 429 0x0000017B // USB Host Transmit Interval 430// Endpoint 7 431#define USB_O_RXTYPE7 \ 432 0x0000017C // USB Host Configure Receive Type 433// Endpoint 7 434#define USB_O_RXINTERVAL7 \ 435 0x0000017D // USB Host Receive Polling 436// Interval Endpoint 7 437#define USB_O_DMAINTR 0x00000200 // USB DMA Interrupt 438#define USB_O_DMACTL0 0x00000204 // USB DMA Control 0 439#define USB_O_DMAADDR0 0x00000208 // USB DMA Address 0 440#define USB_O_DMACOUNT0 0x0000020C // USB DMA Count 0 441#define USB_O_DMACTL1 0x00000214 // USB DMA Control 1 442#define USB_O_DMAADDR1 0x00000218 // USB DMA Address 1 443#define USB_O_DMACOUNT1 0x0000021C // USB DMA Count 1 444#define USB_O_DMACTL2 0x00000224 // USB DMA Control 2 445#define USB_O_DMAADDR2 0x00000228 // USB DMA Address 2 446#define USB_O_DMACOUNT2 0x0000022C // USB DMA Count 2 447#define USB_O_DMACTL3 0x00000234 // USB DMA Control 3 448#define USB_O_DMAADDR3 0x00000238 // USB DMA Address 3 449#define USB_O_DMACOUNT3 0x0000023C // USB DMA Count 3 450#define USB_O_DMACTL4 0x00000244 // USB DMA Control 4 451#define USB_O_DMAADDR4 0x00000248 // USB DMA Address 4 452#define USB_O_DMACOUNT4 0x0000024C // USB DMA Count 4 453#define USB_O_DMACTL5 0x00000254 // USB DMA Control 5 454#define USB_O_DMAADDR5 0x00000258 // USB DMA Address 5 455#define USB_O_DMACOUNT5 0x0000025C // USB DMA Count 5 456#define USB_O_DMACTL6 0x00000264 // USB DMA Control 6 457#define USB_O_DMAADDR6 0x00000268 // USB DMA Address 6 458#define USB_O_DMACOUNT6 0x0000026C // USB DMA Count 6 459#define USB_O_DMACTL7 0x00000274 // USB DMA Control 7 460#define USB_O_DMAADDR7 0x00000278 // USB DMA Address 7 461#define USB_O_DMACOUNT7 0x0000027C // USB DMA Count 7 462#define USB_O_RQPKTCOUNT1 \ 463 0x00000304 // USB Request Packet Count in 464// Block Transfer Endpoint 1 465#define USB_O_RQPKTCOUNT2 \ 466 0x00000308 // USB Request Packet Count in 467// Block Transfer Endpoint 2 468#define USB_O_RQPKTCOUNT3 \ 469 0x0000030C // USB Request Packet Count in 470// Block Transfer Endpoint 3 471#define USB_O_RQPKTCOUNT4 \ 472 0x00000310 // USB Request Packet Count in 473// Block Transfer Endpoint 4 474#define USB_O_RQPKTCOUNT5 \ 475 0x00000314 // USB Request Packet Count in 476// Block Transfer Endpoint 5 477#define USB_O_RQPKTCOUNT6 \ 478 0x00000318 // USB Request Packet Count in 479// Block Transfer Endpoint 6 480#define USB_O_RQPKTCOUNT7 \ 481 0x0000031C // USB Request Packet Count in 482// Block Transfer Endpoint 7 483#define USB_O_RXDPKTBUFDIS \ 484 0x00000340 // USB Receive Double Packet Buffer 485// Disable 486#define USB_O_TXDPKTBUFDIS \ 487 0x00000342 // USB Transmit Double Packet 488// Buffer Disable 489#define USB_O_CTO 0x00000344 // USB Chirp Timeout 490#define USB_O_HHSRTN \ 491 0x00000346 // USB High Speed to UTM Operating 492// Delay 493#define USB_O_HSBT 0x00000348 // USB High Speed Time-out Adder 494#define USB_O_LPMATTR 0x00000360 // USB LPM Attributes 495#define USB_O_LPMCNTRL 0x00000362 // USB LPM Control 496#define USB_O_LPMIM 0x00000363 // USB LPM Interrupt Mask 497#define USB_O_LPMRIS 0x00000364 // USB LPM Raw Interrupt Status 498#define USB_O_LPMFADDR 0x00000365 // USB LPM Function Address 499#define USB_O_EPC 0x00000400 // USB External Power Control 500#define USB_O_EPCRIS \ 501 0x00000404 // USB External Power Control Raw 502// Interrupt Status 503#define USB_O_EPCIM \ 504 0x00000408 // USB External Power Control 505// Interrupt Mask 506#define USB_O_EPCISC \ 507 0x0000040C // USB External Power Control 508// Interrupt Status and Clear 509#define USB_O_DRRIS \ 510 0x00000410 // USB Device RESUME Raw Interrupt 511// Status 512#define USB_O_DRIM 0x00000414 // USB Device RESUME Interrupt Mask 513#define USB_O_DRISC \ 514 0x00000418 // USB Device RESUME Interrupt 515// Status and Clear 516#define USB_O_GPCS \ 517 0x0000041C // USB General-Purpose Control and 518// Status 519#define USB_O_VDC 0x00000430 // USB VBUS Droop Control 520#define USB_O_VDCRIS \ 521 0x00000434 // USB VBUS Droop Control Raw 522// Interrupt Status 523#define USB_O_VDCIM \ 524 0x00000438 // USB VBUS Droop Control Interrupt 525// Mask 526#define USB_O_VDCISC \ 527 0x0000043C // USB VBUS Droop Control Interrupt 528// Status and Clear 529#define USB_O_IDVRIS \ 530 0x00000444 // USB ID Valid Detect Raw 531// Interrupt Status 532#define USB_O_IDVIM \ 533 0x00000448 // USB ID Valid Detect Interrupt 534// Mask 535#define USB_O_IDVISC \ 536 0x0000044C // USB ID Valid Detect Interrupt 537// Status and Clear 538#define USB_O_DMASEL 0x00000450 // USB DMA Select 539#define USB_O_PP 0x00000FC0 // USB Peripheral Properties 540#define USB_O_PC 0x00000FC4 // USB Peripheral Configuration 541#define USB_O_CC 0x00000FC8 // USB Clock Configuration 542 543//***************************************************************************** 544// 545// The following are defines for the bit fields in the USB_O_FADDR register. 546// 547//***************************************************************************** 548#define USB_FADDR_M 0x0000007F // Function Address 549#define USB_FADDR_S 0 550 551//***************************************************************************** 552// 553// The following are defines for the bit fields in the USB_O_POWER register. 554// 555//***************************************************************************** 556#define USB_POWER_ISOUP 0x00000080 // Isochronous Update 557#define USB_POWER_SOFTCONN 0x00000040 // Soft Connect/Disconnect 558#define USB_POWER_HSENAB 0x00000020 // High Speed Enable 559#define USB_POWER_HSMODE 0x00000010 // High Speed Enable 560#define USB_POWER_RESET 0x00000008 // RESET Signaling 561#define USB_POWER_RESUME 0x00000004 // RESUME Signaling 562#define USB_POWER_SUSPEND 0x00000002 // SUSPEND Mode 563#define USB_POWER_PWRDNPHY 0x00000001 // Power Down PHY 564 565//***************************************************************************** 566// 567// The following are defines for the bit fields in the USB_O_TXIS register. 568// 569//***************************************************************************** 570#define USB_TXIS_EP7 0x00000080 // TX Endpoint 7 Interrupt 571#define USB_TXIS_EP6 0x00000040 // TX Endpoint 6 Interrupt 572#define USB_TXIS_EP5 0x00000020 // TX Endpoint 5 Interrupt 573#define USB_TXIS_EP4 0x00000010 // TX Endpoint 4 Interrupt 574#define USB_TXIS_EP3 0x00000008 // TX Endpoint 3 Interrupt 575#define USB_TXIS_EP2 0x00000004 // TX Endpoint 2 Interrupt 576#define USB_TXIS_EP1 0x00000002 // TX Endpoint 1 Interrupt 577#define USB_TXIS_EP0 0x00000001 // TX and RX Endpoint 0 Interrupt 578 579//***************************************************************************** 580// 581// The following are defines for the bit fields in the USB_O_RXIS register. 582// 583//***************************************************************************** 584#define USB_RXIS_EP7 0x00000080 // RX Endpoint 7 Interrupt 585#define USB_RXIS_EP6 0x00000040 // RX Endpoint 6 Interrupt 586#define USB_RXIS_EP5 0x00000020 // RX Endpoint 5 Interrupt 587#define USB_RXIS_EP4 0x00000010 // RX Endpoint 4 Interrupt 588#define USB_RXIS_EP3 0x00000008 // RX Endpoint 3 Interrupt 589#define USB_RXIS_EP2 0x00000004 // RX Endpoint 2 Interrupt 590#define USB_RXIS_EP1 0x00000002 // RX Endpoint 1 Interrupt 591 592//***************************************************************************** 593// 594// The following are defines for the bit fields in the USB_O_TXIE register. 595// 596//***************************************************************************** 597#define USB_TXIE_EP7 0x00000080 // TX Endpoint 7 Interrupt Enable 598#define USB_TXIE_EP6 0x00000040 // TX Endpoint 6 Interrupt Enable 599#define USB_TXIE_EP5 0x00000020 // TX Endpoint 5 Interrupt Enable 600#define USB_TXIE_EP4 0x00000010 // TX Endpoint 4 Interrupt Enable 601#define USB_TXIE_EP3 0x00000008 // TX Endpoint 3 Interrupt Enable 602#define USB_TXIE_EP2 0x00000004 // TX Endpoint 2 Interrupt Enable 603#define USB_TXIE_EP1 0x00000002 // TX Endpoint 1 Interrupt Enable 604#define USB_TXIE_EP0 \ 605 0x00000001 // TX and RX Endpoint 0 Interrupt 606// Enable 607 608//***************************************************************************** 609// 610// The following are defines for the bit fields in the USB_O_RXIE register. 611// 612//***************************************************************************** 613#define USB_RXIE_EP7 0x00000080 // RX Endpoint 7 Interrupt Enable 614#define USB_RXIE_EP6 0x00000040 // RX Endpoint 6 Interrupt Enable 615#define USB_RXIE_EP5 0x00000020 // RX Endpoint 5 Interrupt Enable 616#define USB_RXIE_EP4 0x00000010 // RX Endpoint 4 Interrupt Enable 617#define USB_RXIE_EP3 0x00000008 // RX Endpoint 3 Interrupt Enable 618#define USB_RXIE_EP2 0x00000004 // RX Endpoint 2 Interrupt Enable 619#define USB_RXIE_EP1 0x00000002 // RX Endpoint 1 Interrupt Enable 620 621//***************************************************************************** 622// 623// The following are defines for the bit fields in the USB_O_IS register. 624// 625//***************************************************************************** 626#define USB_IS_VBUSERR 0x00000080 // VBUS Error (OTG only) 627#define USB_IS_SESREQ 0x00000040 // SESSION REQUEST (OTG only) 628#define USB_IS_DISCON 0x00000020 // Session Disconnect (OTG only) 629#define USB_IS_CONN 0x00000010 // Session Connect 630#define USB_IS_SOF 0x00000008 // Start of Frame 631#define USB_IS_BABBLE 0x00000004 // Babble Detected 632#define USB_IS_RESET 0x00000004 // RESET Signaling Detected 633#define USB_IS_RESUME 0x00000002 // RESUME Signaling Detected 634#define USB_IS_SUSPEND 0x00000001 // SUSPEND Signaling Detected 635 636//***************************************************************************** 637// 638// The following are defines for the bit fields in the USB_O_IE register. 639// 640//***************************************************************************** 641#define USB_IE_VBUSERR \ 642 0x00000080 // Enable VBUS Error Interrupt (OTG 643// only) 644#define USB_IE_SESREQ \ 645 0x00000040 // Enable Session Request (OTG 646// only) 647#define USB_IE_DISCON 0x00000020 // Enable Disconnect Interrupt 648#define USB_IE_CONN 0x00000010 // Enable Connect Interrupt 649#define USB_IE_SOF 0x00000008 // Enable Start-of-Frame Interrupt 650#define USB_IE_BABBLE 0x00000004 // Enable Babble Interrupt 651#define USB_IE_RESET 0x00000004 // Enable RESET Interrupt 652#define USB_IE_RESUME 0x00000002 // Enable RESUME Interrupt 653#define USB_IE_SUSPND 0x00000001 // Enable SUSPEND Interrupt 654 655//***************************************************************************** 656// 657// The following are defines for the bit fields in the USB_O_FRAME register. 658// 659//***************************************************************************** 660#define USB_FRAME_M 0x000007FF // Frame Number 661#define USB_FRAME_S 0 662 663//***************************************************************************** 664// 665// The following are defines for the bit fields in the USB_O_EPIDX register. 666// 667//***************************************************************************** 668#define USB_EPIDX_EPIDX_M 0x0000000F // Endpoint Index 669#define USB_EPIDX_EPIDX_S 0 670 671//***************************************************************************** 672// 673// The following are defines for the bit fields in the USB_O_TEST register. 674// 675//***************************************************************************** 676#define USB_TEST_FORCEH 0x00000080 // Force Host Mode 677#define USB_TEST_FIFOACC 0x00000040 // FIFO Access 678#define USB_TEST_FORCEFS 0x00000020 // Force Full-Speed Mode 679#define USB_TEST_FORCEHS 0x00000010 // Force High-Speed Mode 680#define USB_TEST_TESTPKT 0x00000008 // Test Packet Mode Enable 681#define USB_TEST_TESTK 0x00000004 // Test_K Mode Enable 682#define USB_TEST_TESTJ 0x00000002 // Test_J Mode Enable 683#define USB_TEST_TESTSE0NAK 0x00000001 // Test_SE0_NAK Test Mode Enable 684 685//***************************************************************************** 686// 687// The following are defines for the bit fields in the USB_O_FIFO0 register. 688// 689//***************************************************************************** 690#define USB_FIFO0_EPDATA_M 0xFFFFFFFF // Endpoint Data 691#define USB_FIFO0_EPDATA_S 0 692 693//***************************************************************************** 694// 695// The following are defines for the bit fields in the USB_O_FIFO1 register. 696// 697//***************************************************************************** 698#define USB_FIFO1_EPDATA_M 0xFFFFFFFF // Endpoint Data 699#define USB_FIFO1_EPDATA_S 0 700 701//***************************************************************************** 702// 703// The following are defines for the bit fields in the USB_O_FIFO2 register. 704// 705//***************************************************************************** 706#define USB_FIFO2_EPDATA_M 0xFFFFFFFF // Endpoint Data 707#define USB_FIFO2_EPDATA_S 0 708 709//***************************************************************************** 710// 711// The following are defines for the bit fields in the USB_O_FIFO3 register. 712// 713//***************************************************************************** 714#define USB_FIFO3_EPDATA_M 0xFFFFFFFF // Endpoint Data 715#define USB_FIFO3_EPDATA_S 0 716 717//***************************************************************************** 718// 719// The following are defines for the bit fields in the USB_O_FIFO4 register. 720// 721//***************************************************************************** 722#define USB_FIFO4_EPDATA_M 0xFFFFFFFF // Endpoint Data 723#define USB_FIFO4_EPDATA_S 0 724 725//***************************************************************************** 726// 727// The following are defines for the bit fields in the USB_O_FIFO5 register. 728// 729//***************************************************************************** 730#define USB_FIFO5_EPDATA_M 0xFFFFFFFF // Endpoint Data 731#define USB_FIFO5_EPDATA_S 0 732 733//***************************************************************************** 734// 735// The following are defines for the bit fields in the USB_O_FIFO6 register. 736// 737//***************************************************************************** 738#define USB_FIFO6_EPDATA_M 0xFFFFFFFF // Endpoint Data 739#define USB_FIFO6_EPDATA_S 0 740 741//***************************************************************************** 742// 743// The following are defines for the bit fields in the USB_O_FIFO7 register. 744// 745//***************************************************************************** 746#define USB_FIFO7_EPDATA_M 0xFFFFFFFF // Endpoint Data 747#define USB_FIFO7_EPDATA_S 0 748 749//***************************************************************************** 750// 751// The following are defines for the bit fields in the USB_O_DEVCTL register. 752// 753//***************************************************************************** 754#define USB_DEVCTL_DEV 0x00000080 // Device Mode (OTG only) 755#define USB_DEVCTL_FSDEV 0x00000040 // Full-Speed Device Detected 756#define USB_DEVCTL_LSDEV 0x00000020 // Low-Speed Device Detected 757#define USB_DEVCTL_VBUS_M 0x00000018 // VBUS Level (OTG only) 758#define USB_DEVCTL_VBUS_NONE 0x00000000 // Below SessionEnd 759#define USB_DEVCTL_VBUS_SEND 0x00000008 // Above SessionEnd, below AValid 760#define USB_DEVCTL_VBUS_AVALID 0x00000010 // Above AValid, below VBUSValid 761#define USB_DEVCTL_VBUS_VALID 0x00000018 // Above VBUSValid 762#define USB_DEVCTL_HOST 0x00000004 // Host Mode 763#define USB_DEVCTL_HOSTREQ 0x00000002 // Host Request (OTG only) 764#define USB_DEVCTL_SESSION 0x00000001 // Session Start/End (OTG only) 765 766//***************************************************************************** 767// 768// The following are defines for the bit fields in the USB_O_CCONF register. 769// 770//***************************************************************************** 771#define USB_CCONF_TXEDMA 0x00000002 // TX Early DMA Enable 772#define USB_CCONF_RXEDMA 0x00000001 // TX Early DMA Enable 773 774//***************************************************************************** 775// 776// The following are defines for the bit fields in the USB_O_TXFIFOSZ register. 777// 778//***************************************************************************** 779#define USB_TXFIFOSZ_DPB 0x00000010 // Double Packet Buffer Support 780#define USB_TXFIFOSZ_SIZE_M 0x0000000F // Max Packet Size 781#define USB_TXFIFOSZ_SIZE_8 0x00000000 // 8 782#define USB_TXFIFOSZ_SIZE_16 0x00000001 // 16 783#define USB_TXFIFOSZ_SIZE_32 0x00000002 // 32 784#define USB_TXFIFOSZ_SIZE_64 0x00000003 // 64 785#define USB_TXFIFOSZ_SIZE_128 0x00000004 // 128 786#define USB_TXFIFOSZ_SIZE_256 0x00000005 // 256 787#define USB_TXFIFOSZ_SIZE_512 0x00000006 // 512 788#define USB_TXFIFOSZ_SIZE_1024 0x00000007 // 1024 789#define USB_TXFIFOSZ_SIZE_2048 0x00000008 // 2048 790 791//***************************************************************************** 792// 793// The following are defines for the bit fields in the USB_O_RXFIFOSZ register. 794// 795//***************************************************************************** 796#define USB_RXFIFOSZ_DPB 0x00000010 // Double Packet Buffer Support 797#define USB_RXFIFOSZ_SIZE_M 0x0000000F // Max Packet Size 798#define USB_RXFIFOSZ_SIZE_8 0x00000000 // 8 799#define USB_RXFIFOSZ_SIZE_16 0x00000001 // 16 800#define USB_RXFIFOSZ_SIZE_32 0x00000002 // 32 801#define USB_RXFIFOSZ_SIZE_64 0x00000003 // 64 802#define USB_RXFIFOSZ_SIZE_128 0x00000004 // 128 803#define USB_RXFIFOSZ_SIZE_256 0x00000005 // 256 804#define USB_RXFIFOSZ_SIZE_512 0x00000006 // 512 805#define USB_RXFIFOSZ_SIZE_1024 0x00000007 // 1024 806#define USB_RXFIFOSZ_SIZE_2048 0x00000008 // 2048 807 808//***************************************************************************** 809// 810// The following are defines for the bit fields in the USB_O_TXFIFOADD 811// register. 812// 813//***************************************************************************** 814#define USB_TXFIFOADD_ADDR_M 0x000001FF // Transmit/Receive Start Address 815#define USB_TXFIFOADD_ADDR_S 0 816 817//***************************************************************************** 818// 819// The following are defines for the bit fields in the USB_O_RXFIFOADD 820// register. 821// 822//***************************************************************************** 823#define USB_RXFIFOADD_ADDR_M 0x000001FF // Transmit/Receive Start Address 824#define USB_RXFIFOADD_ADDR_S 0 825 826//***************************************************************************** 827// 828// The following are defines for the bit fields in the USB_O_ULPIVBUSCTL 829// register. 830// 831//***************************************************************************** 832#define USB_ULPIVBUSCTL_USEEXTVBUSIND 0x00000002 // Use External VBUS Indicator 833#define USB_ULPIVBUSCTL_USEEXTVBUS 0x00000001 // Use External VBUS 834 835//***************************************************************************** 836// 837// The following are defines for the bit fields in the USB_O_ULPIREGDATA 838// register. 839// 840//***************************************************************************** 841#define USB_ULPIREGDATA_REGDATA_M 0x000000FF // Register Data 842#define USB_ULPIREGDATA_REGDATA_S 0 843 844//***************************************************************************** 845// 846// The following are defines for the bit fields in the USB_O_ULPIREGADDR 847// register. 848// 849//***************************************************************************** 850#define USB_ULPIREGADDR_ADDR_M 0x000000FF // Register Address 851#define USB_ULPIREGADDR_ADDR_S 0 852 853//***************************************************************************** 854// 855// The following are defines for the bit fields in the USB_O_ULPIREGCTL 856// register. 857// 858//***************************************************************************** 859#define USB_ULPIREGCTL_RDWR 0x00000004 // Read/Write Control 860#define USB_ULPIREGCTL_REGCMPLT 0x00000002 // Register Access Complete 861#define USB_ULPIREGCTL_REGACC 0x00000001 // Initiate Register Access 862 863//***************************************************************************** 864// 865// The following are defines for the bit fields in the USB_O_EPINFO register. 866// 867//***************************************************************************** 868#define USB_EPINFO_RXEP_M 0x000000F0 // RX Endpoints 869#define USB_EPINFO_TXEP_M 0x0000000F // TX Endpoints 870#define USB_EPINFO_RXEP_S 4 871#define USB_EPINFO_TXEP_S 0 872 873//***************************************************************************** 874// 875// The following are defines for the bit fields in the USB_O_RAMINFO register. 876// 877//***************************************************************************** 878#define USB_RAMINFO_DMACHAN_M 0x000000F0 // DMA Channels 879#define USB_RAMINFO_RAMBITS_M 0x0000000F // RAM Address Bus Width 880#define USB_RAMINFO_DMACHAN_S 4 881#define USB_RAMINFO_RAMBITS_S 0 882 883//***************************************************************************** 884// 885// The following are defines for the bit fields in the USB_O_CONTIM register. 886// 887//***************************************************************************** 888#define USB_CONTIM_WTCON_M 0x000000F0 // Connect Wait 889#define USB_CONTIM_WTID_M 0x0000000F // Wait ID 890#define USB_CONTIM_WTCON_S 4 891#define USB_CONTIM_WTID_S 0 892 893//***************************************************************************** 894// 895// The following are defines for the bit fields in the USB_O_VPLEN register. 896// 897//***************************************************************************** 898#define USB_VPLEN_VPLEN_M 0x000000FF // VBUS Pulse Length 899#define USB_VPLEN_VPLEN_S 0 900 901//***************************************************************************** 902// 903// The following are defines for the bit fields in the USB_O_HSEOF register. 904// 905//***************************************************************************** 906#define USB_HSEOF_HSEOFG_M 0x000000FF // HIgh-Speed End-of-Frame Gap 907#define USB_HSEOF_HSEOFG_S 0 908 909//***************************************************************************** 910// 911// The following are defines for the bit fields in the USB_O_FSEOF register. 912// 913//***************************************************************************** 914#define USB_FSEOF_FSEOFG_M 0x000000FF // Full-Speed End-of-Frame Gap 915#define USB_FSEOF_FSEOFG_S 0 916 917//***************************************************************************** 918// 919// The following are defines for the bit fields in the USB_O_LSEOF register. 920// 921//***************************************************************************** 922#define USB_LSEOF_LSEOFG_M 0x000000FF // Low-Speed End-of-Frame Gap 923#define USB_LSEOF_LSEOFG_S 0 924 925//***************************************************************************** 926// 927// The following are defines for the bit fields in the USB_O_TXFUNCADDR0 928// register. 929// 930//***************************************************************************** 931#define USB_TXFUNCADDR0_ADDR_M 0x0000007F // Device Address 932#define USB_TXFUNCADDR0_ADDR_S 0 933 934//***************************************************************************** 935// 936// The following are defines for the bit fields in the USB_O_TXHUBADDR0 937// register. 938// 939//***************************************************************************** 940#define USB_TXHUBADDR0_ADDR_M 0x0000007F // Hub Address 941#define USB_TXHUBADDR0_ADDR_S 0 942 943//***************************************************************************** 944// 945// The following are defines for the bit fields in the USB_O_TXHUBPORT0 946// register. 947// 948//***************************************************************************** 949#define USB_TXHUBPORT0_PORT_M 0x0000007F // Hub Port 950#define USB_TXHUBPORT0_PORT_S 0 951 952//***************************************************************************** 953// 954// The following are defines for the bit fields in the USB_O_TXFUNCADDR1 955// register. 956// 957//***************************************************************************** 958#define USB_TXFUNCADDR1_ADDR_M 0x0000007F // Device Address 959#define USB_TXFUNCADDR1_ADDR_S 0 960 961//***************************************************************************** 962// 963// The following are defines for the bit fields in the USB_O_TXHUBADDR1 964// register. 965// 966//***************************************************************************** 967#define USB_TXHUBADDR1_ADDR_M 0x0000007F // Hub Address 968#define USB_TXHUBADDR1_ADDR_S 0 969 970//***************************************************************************** 971// 972// The following are defines for the bit fields in the USB_O_TXHUBPORT1 973// register. 974// 975//***************************************************************************** 976#define USB_TXHUBPORT1_PORT_M 0x0000007F // Hub Port 977#define USB_TXHUBPORT1_PORT_S 0 978 979//***************************************************************************** 980// 981// The following are defines for the bit fields in the USB_O_RXFUNCADDR1 982// register. 983// 984//***************************************************************************** 985#define USB_RXFUNCADDR1_ADDR_M 0x0000007F // Device Address 986#define USB_RXFUNCADDR1_ADDR_S 0 987 988//***************************************************************************** 989// 990// The following are defines for the bit fields in the USB_O_RXHUBADDR1 991// register. 992// 993//***************************************************************************** 994#define USB_RXHUBADDR1_ADDR_M 0x0000007F // Hub Address 995#define USB_RXHUBADDR1_ADDR_S 0 996 997//***************************************************************************** 998// 999// The following are defines for the bit fields in the USB_O_RXHUBPORT1 1000// register. 1001// 1002//***************************************************************************** 1003#define USB_RXHUBPORT1_PORT_M 0x0000007F // Hub Port 1004#define USB_RXHUBPORT1_PORT_S 0 1005 1006//***************************************************************************** 1007// 1008// The following are defines for the bit fields in the USB_O_TXFUNCADDR2 1009// register. 1010// 1011//***************************************************************************** 1012#define USB_TXFUNCADDR2_ADDR_M 0x0000007F // Device Address 1013#define USB_TXFUNCADDR2_ADDR_S 0 1014 1015//***************************************************************************** 1016// 1017// The following are defines for the bit fields in the USB_O_TXHUBADDR2 1018// register. 1019// 1020//***************************************************************************** 1021#define USB_TXHUBADDR2_ADDR_M 0x0000007F // Hub Address 1022#define USB_TXHUBADDR2_ADDR_S 0 1023 1024//***************************************************************************** 1025// 1026// The following are defines for the bit fields in the USB_O_TXHUBPORT2 1027// register. 1028// 1029//***************************************************************************** 1030#define USB_TXHUBPORT2_PORT_M 0x0000007F // Hub Port 1031#define USB_TXHUBPORT2_PORT_S 0 1032 1033//***************************************************************************** 1034// 1035// The following are defines for the bit fields in the USB_O_RXFUNCADDR2 1036// register. 1037// 1038//***************************************************************************** 1039#define USB_RXFUNCADDR2_ADDR_M 0x0000007F // Device Address 1040#define USB_RXFUNCADDR2_ADDR_S 0 1041 1042//***************************************************************************** 1043// 1044// The following are defines for the bit fields in the USB_O_RXHUBADDR2 1045// register. 1046// 1047//***************************************************************************** 1048#define USB_RXHUBADDR2_ADDR_M 0x0000007F // Hub Address 1049#define USB_RXHUBADDR2_ADDR_S 0 1050 1051//***************************************************************************** 1052// 1053// The following are defines for the bit fields in the USB_O_RXHUBPORT2 1054// register. 1055// 1056//***************************************************************************** 1057#define USB_RXHUBPORT2_PORT_M 0x0000007F // Hub Port 1058#define USB_RXHUBPORT2_PORT_S 0 1059 1060//***************************************************************************** 1061// 1062// The following are defines for the bit fields in the USB_O_TXFUNCADDR3 1063// register. 1064// 1065//***************************************************************************** 1066#define USB_TXFUNCADDR3_ADDR_M 0x0000007F // Device Address 1067#define USB_TXFUNCADDR3_ADDR_S 0 1068 1069//***************************************************************************** 1070// 1071// The following are defines for the bit fields in the USB_O_TXHUBADDR3 1072// register. 1073// 1074//***************************************************************************** 1075#define USB_TXHUBADDR3_ADDR_M 0x0000007F // Hub Address 1076#define USB_TXHUBADDR3_ADDR_S 0 1077 1078//***************************************************************************** 1079// 1080// The following are defines for the bit fields in the USB_O_TXHUBPORT3 1081// register. 1082// 1083//***************************************************************************** 1084#define USB_TXHUBPORT3_PORT_M 0x0000007F // Hub Port 1085#define USB_TXHUBPORT3_PORT_S 0 1086 1087//***************************************************************************** 1088// 1089// The following are defines for the bit fields in the USB_O_RXFUNCADDR3 1090// register. 1091// 1092//***************************************************************************** 1093#define USB_RXFUNCADDR3_ADDR_M 0x0000007F // Device Address 1094#define USB_RXFUNCADDR3_ADDR_S 0 1095 1096//***************************************************************************** 1097// 1098// The following are defines for the bit fields in the USB_O_RXHUBADDR3 1099// register. 1100// 1101//***************************************************************************** 1102#define USB_RXHUBADDR3_ADDR_M 0x0000007F // Hub Address 1103#define USB_RXHUBADDR3_ADDR_S 0 1104 1105//***************************************************************************** 1106// 1107// The following are defines for the bit fields in the USB_O_RXHUBPORT3 1108// register. 1109// 1110//***************************************************************************** 1111#define USB_RXHUBPORT3_PORT_M 0x0000007F // Hub Port 1112#define USB_RXHUBPORT3_PORT_S 0 1113 1114//***************************************************************************** 1115// 1116// The following are defines for the bit fields in the USB_O_TXFUNCADDR4 1117// register. 1118// 1119//***************************************************************************** 1120#define USB_TXFUNCADDR4_ADDR_M 0x0000007F // Device Address 1121#define USB_TXFUNCADDR4_ADDR_S 0 1122 1123//***************************************************************************** 1124// 1125// The following are defines for the bit fields in the USB_O_TXHUBADDR4 1126// register. 1127// 1128//***************************************************************************** 1129#define USB_TXHUBADDR4_ADDR_M 0x0000007F // Hub Address 1130#define USB_TXHUBADDR4_ADDR_S 0 1131 1132//***************************************************************************** 1133// 1134// The following are defines for the bit fields in the USB_O_TXHUBPORT4 1135// register. 1136// 1137//***************************************************************************** 1138#define USB_TXHUBPORT4_PORT_M 0x0000007F // Hub Port 1139#define USB_TXHUBPORT4_PORT_S 0 1140 1141//***************************************************************************** 1142// 1143// The following are defines for the bit fields in the USB_O_RXFUNCADDR4 1144// register. 1145// 1146//***************************************************************************** 1147#define USB_RXFUNCADDR4_ADDR_M 0x0000007F // Device Address 1148#define USB_RXFUNCADDR4_ADDR_S 0 1149 1150//***************************************************************************** 1151// 1152// The following are defines for the bit fields in the USB_O_RXHUBADDR4 1153// register. 1154// 1155//***************************************************************************** 1156#define USB_RXHUBADDR4_ADDR_M 0x0000007F // Hub Address 1157#define USB_RXHUBADDR4_ADDR_S 0 1158 1159//***************************************************************************** 1160// 1161// The following are defines for the bit fields in the USB_O_RXHUBPORT4 1162// register. 1163// 1164//***************************************************************************** 1165#define USB_RXHUBPORT4_PORT_M 0x0000007F // Hub Port 1166#define USB_RXHUBPORT4_PORT_S 0 1167 1168//***************************************************************************** 1169// 1170// The following are defines for the bit fields in the USB_O_TXFUNCADDR5 1171// register. 1172// 1173//***************************************************************************** 1174#define USB_TXFUNCADDR5_ADDR_M 0x0000007F // Device Address 1175#define USB_TXFUNCADDR5_ADDR_S 0 1176 1177//***************************************************************************** 1178// 1179// The following are defines for the bit fields in the USB_O_TXHUBADDR5 1180// register. 1181// 1182//***************************************************************************** 1183#define USB_TXHUBADDR5_ADDR_M 0x0000007F // Hub Address 1184#define USB_TXHUBADDR5_ADDR_S 0 1185 1186//***************************************************************************** 1187// 1188// The following are defines for the bit fields in the USB_O_TXHUBPORT5 1189// register. 1190// 1191//***************************************************************************** 1192#define USB_TXHUBPORT5_PORT_M 0x0000007F // Hub Port 1193#define USB_TXHUBPORT5_PORT_S 0 1194 1195//***************************************************************************** 1196// 1197// The following are defines for the bit fields in the USB_O_RXFUNCADDR5 1198// register. 1199// 1200//***************************************************************************** 1201#define USB_RXFUNCADDR5_ADDR_M 0x0000007F // Device Address 1202#define USB_RXFUNCADDR5_ADDR_S 0 1203 1204//***************************************************************************** 1205// 1206// The following are defines for the bit fields in the USB_O_RXHUBADDR5 1207// register. 1208// 1209//***************************************************************************** 1210#define USB_RXHUBADDR5_ADDR_M 0x0000007F // Hub Address 1211#define USB_RXHUBADDR5_ADDR_S 0 1212 1213//***************************************************************************** 1214// 1215// The following are defines for the bit fields in the USB_O_RXHUBPORT5 1216// register. 1217// 1218//***************************************************************************** 1219#define USB_RXHUBPORT5_PORT_M 0x0000007F // Hub Port 1220#define USB_RXHUBPORT5_PORT_S 0 1221 1222//***************************************************************************** 1223// 1224// The following are defines for the bit fields in the USB_O_TXFUNCADDR6 1225// register. 1226// 1227//***************************************************************************** 1228#define USB_TXFUNCADDR6_ADDR_M 0x0000007F // Device Address 1229#define USB_TXFUNCADDR6_ADDR_S 0 1230 1231//***************************************************************************** 1232// 1233// The following are defines for the bit fields in the USB_O_TXHUBADDR6 1234// register. 1235// 1236//***************************************************************************** 1237#define USB_TXHUBADDR6_ADDR_M 0x0000007F // Hub Address 1238#define USB_TXHUBADDR6_ADDR_S 0 1239 1240//***************************************************************************** 1241// 1242// The following are defines for the bit fields in the USB_O_TXHUBPORT6 1243// register. 1244// 1245//***************************************************************************** 1246#define USB_TXHUBPORT6_PORT_M 0x0000007F // Hub Port 1247#define USB_TXHUBPORT6_PORT_S 0 1248 1249//***************************************************************************** 1250// 1251// The following are defines for the bit fields in the USB_O_RXFUNCADDR6 1252// register. 1253// 1254//***************************************************************************** 1255#define USB_RXFUNCADDR6_ADDR_M 0x0000007F // Device Address 1256#define USB_RXFUNCADDR6_ADDR_S 0 1257 1258//***************************************************************************** 1259// 1260// The following are defines for the bit fields in the USB_O_RXHUBADDR6 1261// register. 1262// 1263//***************************************************************************** 1264#define USB_RXHUBADDR6_ADDR_M 0x0000007F // Hub Address 1265#define USB_RXHUBADDR6_ADDR_S 0 1266 1267//***************************************************************************** 1268// 1269// The following are defines for the bit fields in the USB_O_RXHUBPORT6 1270// register. 1271// 1272//***************************************************************************** 1273#define USB_RXHUBPORT6_PORT_M 0x0000007F // Hub Port 1274#define USB_RXHUBPORT6_PORT_S 0 1275 1276//***************************************************************************** 1277// 1278// The following are defines for the bit fields in the USB_O_TXFUNCADDR7 1279// register. 1280// 1281//***************************************************************************** 1282#define USB_TXFUNCADDR7_ADDR_M 0x0000007F // Device Address 1283#define USB_TXFUNCADDR7_ADDR_S 0 1284 1285//***************************************************************************** 1286// 1287// The following are defines for the bit fields in the USB_O_TXHUBADDR7 1288// register. 1289// 1290//***************************************************************************** 1291#define USB_TXHUBADDR7_ADDR_M 0x0000007F // Hub Address 1292#define USB_TXHUBADDR7_ADDR_S 0 1293 1294//***************************************************************************** 1295// 1296// The following are defines for the bit fields in the USB_O_TXHUBPORT7 1297// register. 1298// 1299//***************************************************************************** 1300#define USB_TXHUBPORT7_PORT_M 0x0000007F // Hub Port 1301#define USB_TXHUBPORT7_PORT_S 0 1302 1303//***************************************************************************** 1304// 1305// The following are defines for the bit fields in the USB_O_RXFUNCADDR7 1306// register. 1307// 1308//***************************************************************************** 1309#define USB_RXFUNCADDR7_ADDR_M 0x0000007F // Device Address 1310#define USB_RXFUNCADDR7_ADDR_S 0 1311 1312//***************************************************************************** 1313// 1314// The following are defines for the bit fields in the USB_O_RXHUBADDR7 1315// register. 1316// 1317//***************************************************************************** 1318#define USB_RXHUBADDR7_ADDR_M 0x0000007F // Hub Address 1319#define USB_RXHUBADDR7_ADDR_S 0 1320 1321//***************************************************************************** 1322// 1323// The following are defines for the bit fields in the USB_O_RXHUBPORT7 1324// register. 1325// 1326//***************************************************************************** 1327#define USB_RXHUBPORT7_PORT_M 0x0000007F // Hub Port 1328#define USB_RXHUBPORT7_PORT_S 0 1329 1330//***************************************************************************** 1331// 1332// The following are defines for the bit fields in the USB_O_CSRL0 register. 1333// 1334//***************************************************************************** 1335#define USB_CSRL0_NAKTO 0x00000080 // NAK Timeout 1336#define USB_CSRL0_SETENDC 0x00000080 // Setup End Clear 1337#define USB_CSRL0_STATUS 0x00000040 // STATUS Packet 1338#define USB_CSRL0_RXRDYC 0x00000040 // RXRDY Clear 1339#define USB_CSRL0_REQPKT 0x00000020 // Request Packet 1340#define USB_CSRL0_STALL 0x00000020 // Send Stall 1341#define USB_CSRL0_SETEND 0x00000010 // Setup End 1342#define USB_CSRL0_ERROR 0x00000010 // Error 1343#define USB_CSRL0_DATAEND 0x00000008 // Data End 1344#define USB_CSRL0_SETUP 0x00000008 // Setup Packet 1345#define USB_CSRL0_STALLED 0x00000004 // Endpoint Stalled 1346#define USB_CSRL0_TXRDY 0x00000002 // Transmit Packet Ready 1347#define USB_CSRL0_RXRDY 0x00000001 // Receive Packet Ready 1348 1349//***************************************************************************** 1350// 1351// The following are defines for the bit fields in the USB_O_CSRH0 register. 1352// 1353//***************************************************************************** 1354#define USB_CSRH0_DISPING 0x00000008 // PING Disable 1355#define USB_CSRH0_DTWE 0x00000004 // Data Toggle Write Enable 1356#define USB_CSRH0_DT 0x00000002 // Data Toggle 1357#define USB_CSRH0_FLUSH 0x00000001 // Flush FIFO 1358 1359//***************************************************************************** 1360// 1361// The following are defines for the bit fields in the USB_O_COUNT0 register. 1362// 1363//***************************************************************************** 1364#define USB_COUNT0_COUNT_M 0x0000007F // FIFO Count 1365#define USB_COUNT0_COUNT_S 0 1366 1367//***************************************************************************** 1368// 1369// The following are defines for the bit fields in the USB_O_TYPE0 register. 1370// 1371//***************************************************************************** 1372#define USB_TYPE0_SPEED_M 0x000000C0 // Operating Speed 1373#define USB_TYPE0_SPEED_HIGH 0x00000040 // High 1374#define USB_TYPE0_SPEED_FULL 0x00000080 // Full 1375#define USB_TYPE0_SPEED_LOW 0x000000C0 // Low 1376 1377//***************************************************************************** 1378// 1379// The following are defines for the bit fields in the USB_O_NAKLMT register. 1380// 1381//***************************************************************************** 1382#define USB_NAKLMT_NAKLMT_M 0x0000001F // EP0 NAK Limit 1383#define USB_NAKLMT_NAKLMT_S 0 1384 1385//***************************************************************************** 1386// 1387// The following are defines for the bit fields in the USB_O_TXMAXP1 register. 1388// 1389//***************************************************************************** 1390#define USB_TXMAXP1_MAXLOAD_M 0x000007FF // Maximum Payload 1391#define USB_TXMAXP1_MAXLOAD_S 0 1392 1393//***************************************************************************** 1394// 1395// The following are defines for the bit fields in the USB_O_TXCSRL1 register. 1396// 1397//***************************************************************************** 1398#define USB_TXCSRL1_NAKTO 0x00000080 // NAK Timeout 1399#define USB_TXCSRL1_CLRDT 0x00000040 // Clear Data Toggle 1400#define USB_TXCSRL1_STALLED 0x00000020 // Endpoint Stalled 1401#define USB_TXCSRL1_STALL 0x00000010 // Send STALL 1402#define USB_TXCSRL1_SETUP 0x00000010 // Setup Packet 1403#define USB_TXCSRL1_FLUSH 0x00000008 // Flush FIFO 1404#define USB_TXCSRL1_ERROR 0x00000004 // Error 1405#define USB_TXCSRL1_UNDRN 0x00000004 // Underrun 1406#define USB_TXCSRL1_FIFONE 0x00000002 // FIFO Not Empty 1407#define USB_TXCSRL1_TXRDY 0x00000001 // Transmit Packet Ready 1408 1409//***************************************************************************** 1410// 1411// The following are defines for the bit fields in the USB_O_TXCSRH1 register. 1412// 1413//***************************************************************************** 1414#define USB_TXCSRH1_AUTOSET 0x00000080 // Auto Set 1415#define USB_TXCSRH1_ISO 0x00000040 // Isochronous Transfers 1416#define USB_TXCSRH1_MODE 0x00000020 // Mode 1417#define USB_TXCSRH1_DMAEN 0x00000010 // DMA Request Enable 1418#define USB_TXCSRH1_FDT 0x00000008 // Force Data Toggle 1419#define USB_TXCSRH1_DMAMOD 0x00000004 // DMA Request Mode 1420#define USB_TXCSRH1_DTWE 0x00000002 // Data Toggle Write Enable 1421#define USB_TXCSRH1_DT 0x00000001 // Data Toggle 1422 1423//***************************************************************************** 1424// 1425// The following are defines for the bit fields in the USB_O_RXMAXP1 register. 1426// 1427//***************************************************************************** 1428#define USB_RXMAXP1_MAXLOAD_M 0x000007FF // Maximum Payload 1429#define USB_RXMAXP1_MAXLOAD_S 0 1430 1431//***************************************************************************** 1432// 1433// The following are defines for the bit fields in the USB_O_RXCSRL1 register. 1434// 1435//***************************************************************************** 1436#define USB_RXCSRL1_CLRDT 0x00000080 // Clear Data Toggle 1437#define USB_RXCSRL1_STALLED 0x00000040 // Endpoint Stalled 1438#define USB_RXCSRL1_STALL 0x00000020 // Send STALL 1439#define USB_RXCSRL1_REQPKT 0x00000020 // Request Packet 1440#define USB_RXCSRL1_FLUSH 0x00000010 // Flush FIFO 1441#define USB_RXCSRL1_DATAERR 0x00000008 // Data Error 1442#define USB_RXCSRL1_NAKTO 0x00000008 // NAK Timeout 1443#define USB_RXCSRL1_OVER 0x00000004 // Overrun 1444#define USB_RXCSRL1_ERROR 0x00000004 // Error 1445#define USB_RXCSRL1_FULL 0x00000002 // FIFO Full 1446#define USB_RXCSRL1_RXRDY 0x00000001 // Receive Packet Ready 1447 1448//***************************************************************************** 1449// 1450// The following are defines for the bit fields in the USB_O_RXCSRH1 register. 1451// 1452//***************************************************************************** 1453#define USB_RXCSRH1_AUTOCL 0x00000080 // Auto Clear 1454#define USB_RXCSRH1_AUTORQ 0x00000040 // Auto Request 1455#define USB_RXCSRH1_ISO 0x00000040 // Isochronous Transfers 1456#define USB_RXCSRH1_DMAEN 0x00000020 // DMA Request Enable 1457#define USB_RXCSRH1_DISNYET 0x00000010 // Disable NYET 1458#define USB_RXCSRH1_PIDERR 0x00000010 // PID Error 1459#define USB_RXCSRH1_DMAMOD 0x00000008 // DMA Request Mode 1460#define USB_RXCSRH1_DTWE 0x00000004 // Data Toggle Write Enable 1461#define USB_RXCSRH1_DT 0x00000002 // Data Toggle 1462#define USB_RXCSRH1_INCOMPRX \ 1463 0x00000001 // Incomplete RX Transmission 1464// Status 1465 1466//***************************************************************************** 1467// 1468// The following are defines for the bit fields in the USB_O_RXCOUNT1 register. 1469// 1470//***************************************************************************** 1471#define USB_RXCOUNT1_COUNT_M 0x00001FFF // Receive Packet Count 1472#define USB_RXCOUNT1_COUNT_S 0 1473 1474//***************************************************************************** 1475// 1476// The following are defines for the bit fields in the USB_O_TXTYPE1 register. 1477// 1478//***************************************************************************** 1479#define USB_TXTYPE1_SPEED_M 0x000000C0 // Operating Speed 1480#define USB_TXTYPE1_SPEED_DFLT 0x00000000 // Default 1481#define USB_TXTYPE1_SPEED_HIGH 0x00000040 // High 1482#define USB_TXTYPE1_SPEED_FULL 0x00000080 // Full 1483#define USB_TXTYPE1_SPEED_LOW 0x000000C0 // Low 1484#define USB_TXTYPE1_PROTO_M 0x00000030 // Protocol 1485#define USB_TXTYPE1_PROTO_CTRL 0x00000000 // Control 1486#define USB_TXTYPE1_PROTO_ISOC 0x00000010 // Isochronous 1487#define USB_TXTYPE1_PROTO_BULK 0x00000020 // Bulk 1488#define USB_TXTYPE1_PROTO_INT 0x00000030 // Interrupt 1489#define USB_TXTYPE1_TEP_M 0x0000000F // Target Endpoint Number 1490#define USB_TXTYPE1_TEP_S 0 1491 1492//***************************************************************************** 1493// 1494// The following are defines for the bit fields in the USB_O_TXINTERVAL1 1495// register. 1496// 1497//***************************************************************************** 1498#define USB_TXINTERVAL1_NAKLMT_M 0x000000FF // NAK Limit 1499#define USB_TXINTERVAL1_TXPOLL_M 0x000000FF // TX Polling 1500#define USB_TXINTERVAL1_TXPOLL_S 0 1501#define USB_TXINTERVAL1_NAKLMT_S 0 1502 1503//***************************************************************************** 1504// 1505// The following are defines for the bit fields in the USB_O_RXTYPE1 register. 1506// 1507//***************************************************************************** 1508#define USB_RXTYPE1_SPEED_M 0x000000C0 // Operating Speed 1509#define USB_RXTYPE1_SPEED_DFLT 0x00000000 // Default 1510#define USB_RXTYPE1_SPEED_HIGH 0x00000040 // High 1511#define USB_RXTYPE1_SPEED_FULL 0x00000080 // Full 1512#define USB_RXTYPE1_SPEED_LOW 0x000000C0 // Low 1513#define USB_RXTYPE1_PROTO_M 0x00000030 // Protocol 1514#define USB_RXTYPE1_PROTO_CTRL 0x00000000 // Control 1515#define USB_RXTYPE1_PROTO_ISOC 0x00000010 // Isochronous 1516#define USB_RXTYPE1_PROTO_BULK 0x00000020 // Bulk 1517#define USB_RXTYPE1_PROTO_INT 0x00000030 // Interrupt 1518#define USB_RXTYPE1_TEP_M 0x0000000F // Target Endpoint Number 1519#define USB_RXTYPE1_TEP_S 0 1520 1521//***************************************************************************** 1522// 1523// The following are defines for the bit fields in the USB_O_RXINTERVAL1 1524// register. 1525// 1526//***************************************************************************** 1527#define USB_RXINTERVAL1_TXPOLL_M 0x000000FF // RX Polling 1528#define USB_RXINTERVAL1_NAKLMT_M 0x000000FF // NAK Limit 1529#define USB_RXINTERVAL1_TXPOLL_S 0 1530#define USB_RXINTERVAL1_NAKLMT_S 0 1531 1532//***************************************************************************** 1533// 1534// The following are defines for the bit fields in the USB_O_TXMAXP2 register. 1535// 1536//***************************************************************************** 1537#define USB_TXMAXP2_MAXLOAD_M 0x000007FF // Maximum Payload 1538#define USB_TXMAXP2_MAXLOAD_S 0 1539 1540//***************************************************************************** 1541// 1542// The following are defines for the bit fields in the USB_O_TXCSRL2 register. 1543// 1544//***************************************************************************** 1545#define USB_TXCSRL2_NAKTO 0x00000080 // NAK Timeout 1546#define USB_TXCSRL2_CLRDT 0x00000040 // Clear Data Toggle 1547#define USB_TXCSRL2_STALLED 0x00000020 // Endpoint Stalled 1548#define USB_TXCSRL2_SETUP 0x00000010 // Setup Packet 1549#define USB_TXCSRL2_STALL 0x00000010 // Send STALL 1550#define USB_TXCSRL2_FLUSH 0x00000008 // Flush FIFO 1551#define USB_TXCSRL2_ERROR 0x00000004 // Error 1552#define USB_TXCSRL2_UNDRN 0x00000004 // Underrun 1553#define USB_TXCSRL2_FIFONE 0x00000002 // FIFO Not Empty 1554#define USB_TXCSRL2_TXRDY 0x00000001 // Transmit Packet Ready 1555 1556//***************************************************************************** 1557// 1558// The following are defines for the bit fields in the USB_O_TXCSRH2 register. 1559// 1560//***************************************************************************** 1561#define USB_TXCSRH2_AUTOSET 0x00000080 // Auto Set 1562#define USB_TXCSRH2_ISO 0x00000040 // Isochronous Transfers 1563#define USB_TXCSRH2_MODE 0x00000020 // Mode 1564#define USB_TXCSRH2_DMAEN 0x00000010 // DMA Request Enable 1565#define USB_TXCSRH2_FDT 0x00000008 // Force Data Toggle 1566#define USB_TXCSRH2_DMAMOD 0x00000004 // DMA Request Mode 1567#define USB_TXCSRH2_DTWE 0x00000002 // Data Toggle Write Enable 1568#define USB_TXCSRH2_DT 0x00000001 // Data Toggle 1569 1570//***************************************************************************** 1571// 1572// The following are defines for the bit fields in the USB_O_RXMAXP2 register. 1573// 1574//***************************************************************************** 1575#define USB_RXMAXP2_MAXLOAD_M 0x000007FF // Maximum Payload 1576#define USB_RXMAXP2_MAXLOAD_S 0 1577 1578//***************************************************************************** 1579// 1580// The following are defines for the bit fields in the USB_O_RXCSRL2 register. 1581// 1582//***************************************************************************** 1583#define USB_RXCSRL2_CLRDT 0x00000080 // Clear Data Toggle 1584#define USB_RXCSRL2_STALLED 0x00000040 // Endpoint Stalled 1585#define USB_RXCSRL2_REQPKT 0x00000020 // Request Packet 1586#define USB_RXCSRL2_STALL 0x00000020 // Send STALL 1587#define USB_RXCSRL2_FLUSH 0x00000010 // Flush FIFO 1588#define USB_RXCSRL2_DATAERR 0x00000008 // Data Error 1589#define USB_RXCSRL2_NAKTO 0x00000008 // NAK Timeout 1590#define USB_RXCSRL2_ERROR 0x00000004 // Error 1591#define USB_RXCSRL2_OVER 0x00000004 // Overrun 1592#define USB_RXCSRL2_FULL 0x00000002 // FIFO Full 1593#define USB_RXCSRL2_RXRDY 0x00000001 // Receive Packet Ready 1594 1595//***************************************************************************** 1596// 1597// The following are defines for the bit fields in the USB_O_RXCSRH2 register. 1598// 1599//***************************************************************************** 1600#define USB_RXCSRH2_AUTOCL 0x00000080 // Auto Clear 1601#define USB_RXCSRH2_AUTORQ 0x00000040 // Auto Request 1602#define USB_RXCSRH2_ISO 0x00000040 // Isochronous Transfers 1603#define USB_RXCSRH2_DMAEN 0x00000020 // DMA Request Enable 1604#define USB_RXCSRH2_DISNYET 0x00000010 // Disable NYET 1605#define USB_RXCSRH2_PIDERR 0x00000010 // PID Error 1606#define USB_RXCSRH2_DMAMOD 0x00000008 // DMA Request Mode 1607#define USB_RXCSRH2_DTWE 0x00000004 // Data Toggle Write Enable 1608#define USB_RXCSRH2_DT 0x00000002 // Data Toggle 1609#define USB_RXCSRH2_INCOMPRX \ 1610 0x00000001 // Incomplete RX Transmission 1611// Status 1612 1613//***************************************************************************** 1614// 1615// The following are defines for the bit fields in the USB_O_RXCOUNT2 register. 1616// 1617//***************************************************************************** 1618#define USB_RXCOUNT2_COUNT_M 0x00001FFF // Receive Packet Count 1619#define USB_RXCOUNT2_COUNT_S 0 1620 1621//***************************************************************************** 1622// 1623// The following are defines for the bit fields in the USB_O_TXTYPE2 register. 1624// 1625//***************************************************************************** 1626#define USB_TXTYPE2_SPEED_M 0x000000C0 // Operating Speed 1627#define USB_TXTYPE2_SPEED_DFLT 0x00000000 // Default 1628#define USB_TXTYPE2_SPEED_HIGH 0x00000040 // High 1629#define USB_TXTYPE2_SPEED_FULL 0x00000080 // Full 1630#define USB_TXTYPE2_SPEED_LOW 0x000000C0 // Low 1631#define USB_TXTYPE2_PROTO_M 0x00000030 // Protocol 1632#define USB_TXTYPE2_PROTO_CTRL 0x00000000 // Control 1633#define USB_TXTYPE2_PROTO_ISOC 0x00000010 // Isochronous 1634#define USB_TXTYPE2_PROTO_BULK 0x00000020 // Bulk 1635#define USB_TXTYPE2_PROTO_INT 0x00000030 // Interrupt 1636#define USB_TXTYPE2_TEP_M 0x0000000F // Target Endpoint Number 1637#define USB_TXTYPE2_TEP_S 0 1638 1639//***************************************************************************** 1640// 1641// The following are defines for the bit fields in the USB_O_TXINTERVAL2 1642// register. 1643// 1644//***************************************************************************** 1645#define USB_TXINTERVAL2_TXPOLL_M 0x000000FF // TX Polling 1646#define USB_TXINTERVAL2_NAKLMT_M 0x000000FF // NAK Limit 1647#define USB_TXINTERVAL2_NAKLMT_S 0 1648#define USB_TXINTERVAL2_TXPOLL_S 0 1649 1650//***************************************************************************** 1651// 1652// The following are defines for the bit fields in the USB_O_RXTYPE2 register. 1653// 1654//***************************************************************************** 1655#define USB_RXTYPE2_SPEED_M 0x000000C0 // Operating Speed 1656#define USB_RXTYPE2_SPEED_DFLT 0x00000000 // Default 1657#define USB_RXTYPE2_SPEED_HIGH 0x00000040 // High 1658#define USB_RXTYPE2_SPEED_FULL 0x00000080 // Full 1659#define USB_RXTYPE2_SPEED_LOW 0x000000C0 // Low 1660#define USB_RXTYPE2_PROTO_M 0x00000030 // Protocol 1661#define USB_RXTYPE2_PROTO_CTRL 0x00000000 // Control 1662#define USB_RXTYPE2_PROTO_ISOC 0x00000010 // Isochronous 1663#define USB_RXTYPE2_PROTO_BULK 0x00000020 // Bulk 1664#define USB_RXTYPE2_PROTO_INT 0x00000030 // Interrupt 1665#define USB_RXTYPE2_TEP_M 0x0000000F // Target Endpoint Number 1666#define USB_RXTYPE2_TEP_S 0 1667 1668//***************************************************************************** 1669// 1670// The following are defines for the bit fields in the USB_O_RXINTERVAL2 1671// register. 1672// 1673//***************************************************************************** 1674#define USB_RXINTERVAL2_TXPOLL_M 0x000000FF // RX Polling 1675#define USB_RXINTERVAL2_NAKLMT_M 0x000000FF // NAK Limit 1676#define USB_RXINTERVAL2_TXPOLL_S 0 1677#define USB_RXINTERVAL2_NAKLMT_S 0 1678 1679//***************************************************************************** 1680// 1681// The following are defines for the bit fields in the USB_O_TXMAXP3 register. 1682// 1683//***************************************************************************** 1684#define USB_TXMAXP3_MAXLOAD_M 0x000007FF // Maximum Payload 1685#define USB_TXMAXP3_MAXLOAD_S 0 1686 1687//***************************************************************************** 1688// 1689// The following are defines for the bit fields in the USB_O_TXCSRL3 register. 1690// 1691//***************************************************************************** 1692#define USB_TXCSRL3_NAKTO 0x00000080 // NAK Timeout 1693#define USB_TXCSRL3_CLRDT 0x00000040 // Clear Data Toggle 1694#define USB_TXCSRL3_STALLED 0x00000020 // Endpoint Stalled 1695#define USB_TXCSRL3_SETUP 0x00000010 // Setup Packet 1696#define USB_TXCSRL3_STALL 0x00000010 // Send STALL 1697#define USB_TXCSRL3_FLUSH 0x00000008 // Flush FIFO 1698#define USB_TXCSRL3_ERROR 0x00000004 // Error 1699#define USB_TXCSRL3_UNDRN 0x00000004 // Underrun 1700#define USB_TXCSRL3_FIFONE 0x00000002 // FIFO Not Empty 1701#define USB_TXCSRL3_TXRDY 0x00000001 // Transmit Packet Ready 1702 1703//***************************************************************************** 1704// 1705// The following are defines for the bit fields in the USB_O_TXCSRH3 register. 1706// 1707//***************************************************************************** 1708#define USB_TXCSRH3_AUTOSET 0x00000080 // Auto Set 1709#define USB_TXCSRH3_ISO 0x00000040 // Isochronous Transfers 1710#define USB_TXCSRH3_MODE 0x00000020 // Mode 1711#define USB_TXCSRH3_DMAEN 0x00000010 // DMA Request Enable 1712#define USB_TXCSRH3_FDT 0x00000008 // Force Data Toggle 1713#define USB_TXCSRH3_DMAMOD 0x00000004 // DMA Request Mode 1714#define USB_TXCSRH3_DTWE 0x00000002 // Data Toggle Write Enable 1715#define USB_TXCSRH3_DT 0x00000001 // Data Toggle 1716 1717//***************************************************************************** 1718// 1719// The following are defines for the bit fields in the USB_O_RXMAXP3 register. 1720// 1721//***************************************************************************** 1722#define USB_RXMAXP3_MAXLOAD_M 0x000007FF // Maximum Payload 1723#define USB_RXMAXP3_MAXLOAD_S 0 1724 1725//***************************************************************************** 1726// 1727// The following are defines for the bit fields in the USB_O_RXCSRL3 register. 1728// 1729//***************************************************************************** 1730#define USB_RXCSRL3_CLRDT 0x00000080 // Clear Data Toggle 1731#define USB_RXCSRL3_STALLED 0x00000040 // Endpoint Stalled 1732#define USB_RXCSRL3_STALL 0x00000020 // Send STALL 1733#define USB_RXCSRL3_REQPKT 0x00000020 // Request Packet 1734#define USB_RXCSRL3_FLUSH 0x00000010 // Flush FIFO 1735#define USB_RXCSRL3_DATAERR 0x00000008 // Data Error 1736#define USB_RXCSRL3_NAKTO 0x00000008 // NAK Timeout 1737#define USB_RXCSRL3_ERROR 0x00000004 // Error 1738#define USB_RXCSRL3_OVER 0x00000004 // Overrun 1739#define USB_RXCSRL3_FULL 0x00000002 // FIFO Full 1740#define USB_RXCSRL3_RXRDY 0x00000001 // Receive Packet Ready 1741 1742//***************************************************************************** 1743// 1744// The following are defines for the bit fields in the USB_O_RXCSRH3 register. 1745// 1746//***************************************************************************** 1747#define USB_RXCSRH3_AUTOCL 0x00000080 // Auto Clear 1748#define USB_RXCSRH3_AUTORQ 0x00000040 // Auto Request 1749#define USB_RXCSRH3_ISO 0x00000040 // Isochronous Transfers 1750#define USB_RXCSRH3_DMAEN 0x00000020 // DMA Request Enable 1751#define USB_RXCSRH3_DISNYET 0x00000010 // Disable NYET 1752#define USB_RXCSRH3_PIDERR 0x00000010 // PID Error 1753#define USB_RXCSRH3_DMAMOD 0x00000008 // DMA Request Mode 1754#define USB_RXCSRH3_DTWE 0x00000004 // Data Toggle Write Enable 1755#define USB_RXCSRH3_DT 0x00000002 // Data Toggle 1756#define USB_RXCSRH3_INCOMPRX \ 1757 0x00000001 // Incomplete RX Transmission 1758// Status 1759 1760//***************************************************************************** 1761// 1762// The following are defines for the bit fields in the USB_O_RXCOUNT3 register. 1763// 1764//***************************************************************************** 1765#define USB_RXCOUNT3_COUNT_M 0x00001FFF // Receive Packet Count 1766#define USB_RXCOUNT3_COUNT_S 0 1767 1768//***************************************************************************** 1769// 1770// The following are defines for the bit fields in the USB_O_TXTYPE3 register. 1771// 1772//***************************************************************************** 1773#define USB_TXTYPE3_SPEED_M 0x000000C0 // Operating Speed 1774#define USB_TXTYPE3_SPEED_DFLT 0x00000000 // Default 1775#define USB_TXTYPE3_SPEED_HIGH 0x00000040 // High 1776#define USB_TXTYPE3_SPEED_FULL 0x00000080 // Full 1777#define USB_TXTYPE3_SPEED_LOW 0x000000C0 // Low 1778#define USB_TXTYPE3_PROTO_M 0x00000030 // Protocol 1779#define USB_TXTYPE3_PROTO_CTRL 0x00000000 // Control 1780#define USB_TXTYPE3_PROTO_ISOC 0x00000010 // Isochronous 1781#define USB_TXTYPE3_PROTO_BULK 0x00000020 // Bulk 1782#define USB_TXTYPE3_PROTO_INT 0x00000030 // Interrupt 1783#define USB_TXTYPE3_TEP_M 0x0000000F // Target Endpoint Number 1784#define USB_TXTYPE3_TEP_S 0 1785 1786//***************************************************************************** 1787// 1788// The following are defines for the bit fields in the USB_O_TXINTERVAL3 1789// register. 1790// 1791//***************************************************************************** 1792#define USB_TXINTERVAL3_TXPOLL_M 0x000000FF // TX Polling 1793#define USB_TXINTERVAL3_NAKLMT_M 0x000000FF // NAK Limit 1794#define USB_TXINTERVAL3_TXPOLL_S 0 1795#define USB_TXINTERVAL3_NAKLMT_S 0 1796 1797//***************************************************************************** 1798// 1799// The following are defines for the bit fields in the USB_O_RXTYPE3 register. 1800// 1801//***************************************************************************** 1802#define USB_RXTYPE3_SPEED_M 0x000000C0 // Operating Speed 1803#define USB_RXTYPE3_SPEED_DFLT 0x00000000 // Default 1804#define USB_RXTYPE3_SPEED_HIGH 0x00000040 // High 1805#define USB_RXTYPE3_SPEED_FULL 0x00000080 // Full 1806#define USB_RXTYPE3_SPEED_LOW 0x000000C0 // Low 1807#define USB_RXTYPE3_PROTO_M 0x00000030 // Protocol 1808#define USB_RXTYPE3_PROTO_CTRL 0x00000000 // Control 1809#define USB_RXTYPE3_PROTO_ISOC 0x00000010 // Isochronous 1810#define USB_RXTYPE3_PROTO_BULK 0x00000020 // Bulk 1811#define USB_RXTYPE3_PROTO_INT 0x00000030 // Interrupt 1812#define USB_RXTYPE3_TEP_M 0x0000000F // Target Endpoint Number 1813#define USB_RXTYPE3_TEP_S 0 1814 1815//***************************************************************************** 1816// 1817// The following are defines for the bit fields in the USB_O_RXINTERVAL3 1818// register. 1819// 1820//***************************************************************************** 1821#define USB_RXINTERVAL3_TXPOLL_M 0x000000FF // RX Polling 1822#define USB_RXINTERVAL3_NAKLMT_M 0x000000FF // NAK Limit 1823#define USB_RXINTERVAL3_TXPOLL_S 0 1824#define USB_RXINTERVAL3_NAKLMT_S 0 1825 1826//***************************************************************************** 1827// 1828// The following are defines for the bit fields in the USB_O_TXMAXP4 register. 1829// 1830//***************************************************************************** 1831#define USB_TXMAXP4_MAXLOAD_M 0x000007FF // Maximum Payload 1832#define USB_TXMAXP4_MAXLOAD_S 0 1833 1834//***************************************************************************** 1835// 1836// The following are defines for the bit fields in the USB_O_TXCSRL4 register. 1837// 1838//***************************************************************************** 1839#define USB_TXCSRL4_NAKTO 0x00000080 // NAK Timeout 1840#define USB_TXCSRL4_CLRDT 0x00000040 // Clear Data Toggle 1841#define USB_TXCSRL4_STALLED 0x00000020 // Endpoint Stalled 1842#define USB_TXCSRL4_SETUP 0x00000010 // Setup Packet 1843#define USB_TXCSRL4_STALL 0x00000010 // Send STALL 1844#define USB_TXCSRL4_FLUSH 0x00000008 // Flush FIFO 1845#define USB_TXCSRL4_ERROR 0x00000004 // Error 1846#define USB_TXCSRL4_UNDRN 0x00000004 // Underrun 1847#define USB_TXCSRL4_FIFONE 0x00000002 // FIFO Not Empty 1848#define USB_TXCSRL4_TXRDY 0x00000001 // Transmit Packet Ready 1849 1850//***************************************************************************** 1851// 1852// The following are defines for the bit fields in the USB_O_TXCSRH4 register. 1853// 1854//***************************************************************************** 1855#define USB_TXCSRH4_AUTOSET 0x00000080 // Auto Set 1856#define USB_TXCSRH4_ISO 0x00000040 // Isochronous Transfers 1857#define USB_TXCSRH4_MODE 0x00000020 // Mode 1858#define USB_TXCSRH4_DMAEN 0x00000010 // DMA Request Enable 1859#define USB_TXCSRH4_FDT 0x00000008 // Force Data Toggle 1860#define USB_TXCSRH4_DMAMOD 0x00000004 // DMA Request Mode 1861#define USB_TXCSRH4_DTWE 0x00000002 // Data Toggle Write Enable 1862#define USB_TXCSRH4_DT 0x00000001 // Data Toggle 1863 1864//***************************************************************************** 1865// 1866// The following are defines for the bit fields in the USB_O_RXMAXP4 register. 1867// 1868//***************************************************************************** 1869#define USB_RXMAXP4_MAXLOAD_M 0x000007FF // Maximum Payload 1870#define USB_RXMAXP4_MAXLOAD_S 0 1871 1872//***************************************************************************** 1873// 1874// The following are defines for the bit fields in the USB_O_RXCSRL4 register. 1875// 1876//***************************************************************************** 1877#define USB_RXCSRL4_CLRDT 0x00000080 // Clear Data Toggle 1878#define USB_RXCSRL4_STALLED 0x00000040 // Endpoint Stalled 1879#define USB_RXCSRL4_STALL 0x00000020 // Send STALL 1880#define USB_RXCSRL4_REQPKT 0x00000020 // Request Packet 1881#define USB_RXCSRL4_FLUSH 0x00000010 // Flush FIFO 1882#define USB_RXCSRL4_NAKTO 0x00000008 // NAK Timeout 1883#define USB_RXCSRL4_DATAERR 0x00000008 // Data Error 1884#define USB_RXCSRL4_OVER 0x00000004 // Overrun 1885#define USB_RXCSRL4_ERROR 0x00000004 // Error 1886#define USB_RXCSRL4_FULL 0x00000002 // FIFO Full 1887#define USB_RXCSRL4_RXRDY 0x00000001 // Receive Packet Ready 1888 1889//***************************************************************************** 1890// 1891// The following are defines for the bit fields in the USB_O_RXCSRH4 register. 1892// 1893//***************************************************************************** 1894#define USB_RXCSRH4_AUTOCL 0x00000080 // Auto Clear 1895#define USB_RXCSRH4_AUTORQ 0x00000040 // Auto Request 1896#define USB_RXCSRH4_ISO 0x00000040 // Isochronous Transfers 1897#define USB_RXCSRH4_DMAEN 0x00000020 // DMA Request Enable 1898#define USB_RXCSRH4_DISNYET 0x00000010 // Disable NYET 1899#define USB_RXCSRH4_PIDERR 0x00000010 // PID Error 1900#define USB_RXCSRH4_DMAMOD 0x00000008 // DMA Request Mode 1901#define USB_RXCSRH4_DTWE 0x00000004 // Data Toggle Write Enable 1902#define USB_RXCSRH4_DT 0x00000002 // Data Toggle 1903#define USB_RXCSRH4_INCOMPRX \ 1904 0x00000001 // Incomplete RX Transmission 1905// Status 1906 1907//***************************************************************************** 1908// 1909// The following are defines for the bit fields in the USB_O_RXCOUNT4 register. 1910// 1911//***************************************************************************** 1912#define USB_RXCOUNT4_COUNT_M 0x00001FFF // Receive Packet Count 1913#define USB_RXCOUNT4_COUNT_S 0 1914 1915//***************************************************************************** 1916// 1917// The following are defines for the bit fields in the USB_O_TXTYPE4 register. 1918// 1919//***************************************************************************** 1920#define USB_TXTYPE4_SPEED_M 0x000000C0 // Operating Speed 1921#define USB_TXTYPE4_SPEED_DFLT 0x00000000 // Default 1922#define USB_TXTYPE4_SPEED_HIGH 0x00000040 // High 1923#define USB_TXTYPE4_SPEED_FULL 0x00000080 // Full 1924#define USB_TXTYPE4_SPEED_LOW 0x000000C0 // Low 1925#define USB_TXTYPE4_PROTO_M 0x00000030 // Protocol 1926#define USB_TXTYPE4_PROTO_CTRL 0x00000000 // Control 1927#define USB_TXTYPE4_PROTO_ISOC 0x00000010 // Isochronous 1928#define USB_TXTYPE4_PROTO_BULK 0x00000020 // Bulk 1929#define USB_TXTYPE4_PROTO_INT 0x00000030 // Interrupt 1930#define USB_TXTYPE4_TEP_M 0x0000000F // Target Endpoint Number 1931#define USB_TXTYPE4_TEP_S 0 1932 1933//***************************************************************************** 1934// 1935// The following are defines for the bit fields in the USB_O_TXINTERVAL4 1936// register. 1937// 1938//***************************************************************************** 1939#define USB_TXINTERVAL4_TXPOLL_M 0x000000FF // TX Polling 1940#define USB_TXINTERVAL4_NAKLMT_M 0x000000FF // NAK Limit 1941#define USB_TXINTERVAL4_NAKLMT_S 0 1942#define USB_TXINTERVAL4_TXPOLL_S 0 1943 1944//***************************************************************************** 1945// 1946// The following are defines for the bit fields in the USB_O_RXTYPE4 register. 1947// 1948//***************************************************************************** 1949#define USB_RXTYPE4_SPEED_M 0x000000C0 // Operating Speed 1950#define USB_RXTYPE4_SPEED_DFLT 0x00000000 // Default 1951#define USB_RXTYPE4_SPEED_HIGH 0x00000040 // High 1952#define USB_RXTYPE4_SPEED_FULL 0x00000080 // Full 1953#define USB_RXTYPE4_SPEED_LOW 0x000000C0 // Low 1954#define USB_RXTYPE4_PROTO_M 0x00000030 // Protocol 1955#define USB_RXTYPE4_PROTO_CTRL 0x00000000 // Control 1956#define USB_RXTYPE4_PROTO_ISOC 0x00000010 // Isochronous 1957#define USB_RXTYPE4_PROTO_BULK 0x00000020 // Bulk 1958#define USB_RXTYPE4_PROTO_INT 0x00000030 // Interrupt 1959#define USB_RXTYPE4_TEP_M 0x0000000F // Target Endpoint Number 1960#define USB_RXTYPE4_TEP_S 0 1961 1962//***************************************************************************** 1963// 1964// The following are defines for the bit fields in the USB_O_RXINTERVAL4 1965// register. 1966// 1967//***************************************************************************** 1968#define USB_RXINTERVAL4_TXPOLL_M 0x000000FF // RX Polling 1969#define USB_RXINTERVAL4_NAKLMT_M 0x000000FF // NAK Limit 1970#define USB_RXINTERVAL4_NAKLMT_S 0 1971#define USB_RXINTERVAL4_TXPOLL_S 0 1972 1973//***************************************************************************** 1974// 1975// The following are defines for the bit fields in the USB_O_TXMAXP5 register. 1976// 1977//***************************************************************************** 1978#define USB_TXMAXP5_MAXLOAD_M 0x000007FF // Maximum Payload 1979#define USB_TXMAXP5_MAXLOAD_S 0 1980 1981//***************************************************************************** 1982// 1983// The following are defines for the bit fields in the USB_O_TXCSRL5 register. 1984// 1985//***************************************************************************** 1986#define USB_TXCSRL5_NAKTO 0x00000080 // NAK Timeout 1987#define USB_TXCSRL5_CLRDT 0x00000040 // Clear Data Toggle 1988#define USB_TXCSRL5_STALLED 0x00000020 // Endpoint Stalled 1989#define USB_TXCSRL5_SETUP 0x00000010 // Setup Packet 1990#define USB_TXCSRL5_STALL 0x00000010 // Send STALL 1991#define USB_TXCSRL5_FLUSH 0x00000008 // Flush FIFO 1992#define USB_TXCSRL5_ERROR 0x00000004 // Error 1993#define USB_TXCSRL5_UNDRN 0x00000004 // Underrun 1994#define USB_TXCSRL5_FIFONE 0x00000002 // FIFO Not Empty 1995#define USB_TXCSRL5_TXRDY 0x00000001 // Transmit Packet Ready 1996 1997//***************************************************************************** 1998// 1999// The following are defines for the bit fields in the USB_O_TXCSRH5 register. 2000// 2001//***************************************************************************** 2002#define USB_TXCSRH5_AUTOSET 0x00000080 // Auto Set 2003#define USB_TXCSRH5_ISO 0x00000040 // Isochronous Transfers 2004#define USB_TXCSRH5_MODE 0x00000020 // Mode 2005#define USB_TXCSRH5_DMAEN 0x00000010 // DMA Request Enable 2006#define USB_TXCSRH5_FDT 0x00000008 // Force Data Toggle 2007#define USB_TXCSRH5_DMAMOD 0x00000004 // DMA Request Mode 2008#define USB_TXCSRH5_DTWE 0x00000002 // Data Toggle Write Enable 2009#define USB_TXCSRH5_DT 0x00000001 // Data Toggle 2010 2011//***************************************************************************** 2012// 2013// The following are defines for the bit fields in the USB_O_RXMAXP5 register. 2014// 2015//***************************************************************************** 2016#define USB_RXMAXP5_MAXLOAD_M 0x000007FF // Maximum Payload 2017#define USB_RXMAXP5_MAXLOAD_S 0 2018 2019//***************************************************************************** 2020// 2021// The following are defines for the bit fields in the USB_O_RXCSRL5 register. 2022// 2023//***************************************************************************** 2024#define USB_RXCSRL5_CLRDT 0x00000080 // Clear Data Toggle 2025#define USB_RXCSRL5_STALLED 0x00000040 // Endpoint Stalled 2026#define USB_RXCSRL5_STALL 0x00000020 // Send STALL 2027#define USB_RXCSRL5_REQPKT 0x00000020 // Request Packet 2028#define USB_RXCSRL5_FLUSH 0x00000010 // Flush FIFO 2029#define USB_RXCSRL5_NAKTO 0x00000008 // NAK Timeout 2030#define USB_RXCSRL5_DATAERR 0x00000008 // Data Error 2031#define USB_RXCSRL5_ERROR 0x00000004 // Error 2032#define USB_RXCSRL5_OVER 0x00000004 // Overrun 2033#define USB_RXCSRL5_FULL 0x00000002 // FIFO Full 2034#define USB_RXCSRL5_RXRDY 0x00000001 // Receive Packet Ready 2035 2036//***************************************************************************** 2037// 2038// The following are defines for the bit fields in the USB_O_RXCSRH5 register. 2039// 2040//***************************************************************************** 2041#define USB_RXCSRH5_AUTOCL 0x00000080 // Auto Clear 2042#define USB_RXCSRH5_AUTORQ 0x00000040 // Auto Request 2043#define USB_RXCSRH5_ISO 0x00000040 // Isochronous Transfers 2044#define USB_RXCSRH5_DMAEN 0x00000020 // DMA Request Enable 2045#define USB_RXCSRH5_DISNYET 0x00000010 // Disable NYET 2046#define USB_RXCSRH5_PIDERR 0x00000010 // PID Error 2047#define USB_RXCSRH5_DMAMOD 0x00000008 // DMA Request Mode 2048#define USB_RXCSRH5_DTWE 0x00000004 // Data Toggle Write Enable 2049#define USB_RXCSRH5_DT 0x00000002 // Data Toggle 2050#define USB_RXCSRH5_INCOMPRX \ 2051 0x00000001 // Incomplete RX Transmission 2052// Status 2053 2054//***************************************************************************** 2055// 2056// The following are defines for the bit fields in the USB_O_RXCOUNT5 register. 2057// 2058//***************************************************************************** 2059#define USB_RXCOUNT5_COUNT_M 0x00001FFF // Receive Packet Count 2060#define USB_RXCOUNT5_COUNT_S 0 2061 2062//***************************************************************************** 2063// 2064// The following are defines for the bit fields in the USB_O_TXTYPE5 register. 2065// 2066//***************************************************************************** 2067#define USB_TXTYPE5_SPEED_M 0x000000C0 // Operating Speed 2068#define USB_TXTYPE5_SPEED_DFLT 0x00000000 // Default 2069#define USB_TXTYPE5_SPEED_HIGH 0x00000040 // High 2070#define USB_TXTYPE5_SPEED_FULL 0x00000080 // Full 2071#define USB_TXTYPE5_SPEED_LOW 0x000000C0 // Low 2072#define USB_TXTYPE5_PROTO_M 0x00000030 // Protocol 2073#define USB_TXTYPE5_PROTO_CTRL 0x00000000 // Control 2074#define USB_TXTYPE5_PROTO_ISOC 0x00000010 // Isochronous 2075#define USB_TXTYPE5_PROTO_BULK 0x00000020 // Bulk 2076#define USB_TXTYPE5_PROTO_INT 0x00000030 // Interrupt 2077#define USB_TXTYPE5_TEP_M 0x0000000F // Target Endpoint Number 2078#define USB_TXTYPE5_TEP_S 0 2079 2080//***************************************************************************** 2081// 2082// The following are defines for the bit fields in the USB_O_TXINTERVAL5 2083// register. 2084// 2085//***************************************************************************** 2086#define USB_TXINTERVAL5_TXPOLL_M 0x000000FF // TX Polling 2087#define USB_TXINTERVAL5_NAKLMT_M 0x000000FF // NAK Limit 2088#define USB_TXINTERVAL5_NAKLMT_S 0 2089#define USB_TXINTERVAL5_TXPOLL_S 0 2090 2091//***************************************************************************** 2092// 2093// The following are defines for the bit fields in the USB_O_RXTYPE5 register. 2094// 2095//***************************************************************************** 2096#define USB_RXTYPE5_SPEED_M 0x000000C0 // Operating Speed 2097#define USB_RXTYPE5_SPEED_DFLT 0x00000000 // Default 2098#define USB_RXTYPE5_SPEED_HIGH 0x00000040 // High 2099#define USB_RXTYPE5_SPEED_FULL 0x00000080 // Full 2100#define USB_RXTYPE5_SPEED_LOW 0x000000C0 // Low 2101#define USB_RXTYPE5_PROTO_M 0x00000030 // Protocol 2102#define USB_RXTYPE5_PROTO_CTRL 0x00000000 // Control 2103#define USB_RXTYPE5_PROTO_ISOC 0x00000010 // Isochronous 2104#define USB_RXTYPE5_PROTO_BULK 0x00000020 // Bulk 2105#define USB_RXTYPE5_PROTO_INT 0x00000030 // Interrupt 2106#define USB_RXTYPE5_TEP_M 0x0000000F // Target Endpoint Number 2107#define USB_RXTYPE5_TEP_S 0 2108 2109//***************************************************************************** 2110// 2111// The following are defines for the bit fields in the USB_O_RXINTERVAL5 2112// register. 2113// 2114//***************************************************************************** 2115#define USB_RXINTERVAL5_TXPOLL_M 0x000000FF // RX Polling 2116#define USB_RXINTERVAL5_NAKLMT_M 0x000000FF // NAK Limit 2117#define USB_RXINTERVAL5_TXPOLL_S 0 2118#define USB_RXINTERVAL5_NAKLMT_S 0 2119 2120//***************************************************************************** 2121// 2122// The following are defines for the bit fields in the USB_O_TXMAXP6 register. 2123// 2124//***************************************************************************** 2125#define USB_TXMAXP6_MAXLOAD_M 0x000007FF // Maximum Payload 2126#define USB_TXMAXP6_MAXLOAD_S 0 2127 2128//***************************************************************************** 2129// 2130// The following are defines for the bit fields in the USB_O_TXCSRL6 register. 2131// 2132//***************************************************************************** 2133#define USB_TXCSRL6_NAKTO 0x00000080 // NAK Timeout 2134#define USB_TXCSRL6_CLRDT 0x00000040 // Clear Data Toggle 2135#define USB_TXCSRL6_STALLED 0x00000020 // Endpoint Stalled 2136#define USB_TXCSRL6_STALL 0x00000010 // Send STALL 2137#define USB_TXCSRL6_SETUP 0x00000010 // Setup Packet 2138#define USB_TXCSRL6_FLUSH 0x00000008 // Flush FIFO 2139#define USB_TXCSRL6_ERROR 0x00000004 // Error 2140#define USB_TXCSRL6_UNDRN 0x00000004 // Underrun 2141#define USB_TXCSRL6_FIFONE 0x00000002 // FIFO Not Empty 2142#define USB_TXCSRL6_TXRDY 0x00000001 // Transmit Packet Ready 2143 2144//***************************************************************************** 2145// 2146// The following are defines for the bit fields in the USB_O_TXCSRH6 register. 2147// 2148//***************************************************************************** 2149#define USB_TXCSRH6_AUTOSET 0x00000080 // Auto Set 2150#define USB_TXCSRH6_ISO 0x00000040 // Isochronous Transfers 2151#define USB_TXCSRH6_MODE 0x00000020 // Mode 2152#define USB_TXCSRH6_DMAEN 0x00000010 // DMA Request Enable 2153#define USB_TXCSRH6_FDT 0x00000008 // Force Data Toggle 2154#define USB_TXCSRH6_DMAMOD 0x00000004 // DMA Request Mode 2155#define USB_TXCSRH6_DTWE 0x00000002 // Data Toggle Write Enable 2156#define USB_TXCSRH6_DT 0x00000001 // Data Toggle 2157 2158//***************************************************************************** 2159// 2160// The following are defines for the bit fields in the USB_O_RXMAXP6 register. 2161// 2162//***************************************************************************** 2163#define USB_RXMAXP6_MAXLOAD_M 0x000007FF // Maximum Payload 2164#define USB_RXMAXP6_MAXLOAD_S 0 2165 2166//***************************************************************************** 2167// 2168// The following are defines for the bit fields in the USB_O_RXCSRL6 register. 2169// 2170//***************************************************************************** 2171#define USB_RXCSRL6_CLRDT 0x00000080 // Clear Data Toggle 2172#define USB_RXCSRL6_STALLED 0x00000040 // Endpoint Stalled 2173#define USB_RXCSRL6_REQPKT 0x00000020 // Request Packet 2174#define USB_RXCSRL6_STALL 0x00000020 // Send STALL 2175#define USB_RXCSRL6_FLUSH 0x00000010 // Flush FIFO 2176#define USB_RXCSRL6_NAKTO 0x00000008 // NAK Timeout 2177#define USB_RXCSRL6_DATAERR 0x00000008 // Data Error 2178#define USB_RXCSRL6_ERROR 0x00000004 // Error 2179#define USB_RXCSRL6_OVER 0x00000004 // Overrun 2180#define USB_RXCSRL6_FULL 0x00000002 // FIFO Full 2181#define USB_RXCSRL6_RXRDY 0x00000001 // Receive Packet Ready 2182 2183//***************************************************************************** 2184// 2185// The following are defines for the bit fields in the USB_O_RXCSRH6 register. 2186// 2187//***************************************************************************** 2188#define USB_RXCSRH6_AUTOCL 0x00000080 // Auto Clear 2189#define USB_RXCSRH6_AUTORQ 0x00000040 // Auto Request 2190#define USB_RXCSRH6_ISO 0x00000040 // Isochronous Transfers 2191#define USB_RXCSRH6_DMAEN 0x00000020 // DMA Request Enable 2192#define USB_RXCSRH6_DISNYET 0x00000010 // Disable NYET 2193#define USB_RXCSRH6_PIDERR 0x00000010 // PID Error 2194#define USB_RXCSRH6_DMAMOD 0x00000008 // DMA Request Mode 2195#define USB_RXCSRH6_DTWE 0x00000004 // Data Toggle Write Enable 2196#define USB_RXCSRH6_DT 0x00000002 // Data Toggle 2197#define USB_RXCSRH6_INCOMPRX \ 2198 0x00000001 // Incomplete RX Transmission 2199// Status 2200 2201//***************************************************************************** 2202// 2203// The following are defines for the bit fields in the USB_O_RXCOUNT6 register. 2204// 2205//***************************************************************************** 2206#define USB_RXCOUNT6_COUNT_M 0x00001FFF // Receive Packet Count 2207#define USB_RXCOUNT6_COUNT_S 0 2208 2209//***************************************************************************** 2210// 2211// The following are defines for the bit fields in the USB_O_TXTYPE6 register. 2212// 2213//***************************************************************************** 2214#define USB_TXTYPE6_SPEED_M 0x000000C0 // Operating Speed 2215#define USB_TXTYPE6_SPEED_DFLT 0x00000000 // Default 2216#define USB_TXTYPE6_SPEED_HIGH 0x00000040 // High 2217#define USB_TXTYPE6_SPEED_FULL 0x00000080 // Full 2218#define USB_TXTYPE6_SPEED_LOW 0x000000C0 // Low 2219#define USB_TXTYPE6_PROTO_M 0x00000030 // Protocol 2220#define USB_TXTYPE6_PROTO_CTRL 0x00000000 // Control 2221#define USB_TXTYPE6_PROTO_ISOC 0x00000010 // Isochronous 2222#define USB_TXTYPE6_PROTO_BULK 0x00000020 // Bulk 2223#define USB_TXTYPE6_PROTO_INT 0x00000030 // Interrupt 2224#define USB_TXTYPE6_TEP_M 0x0000000F // Target Endpoint Number 2225#define USB_TXTYPE6_TEP_S 0 2226 2227//***************************************************************************** 2228// 2229// The following are defines for the bit fields in the USB_O_TXINTERVAL6 2230// register. 2231// 2232//***************************************************************************** 2233#define USB_TXINTERVAL6_TXPOLL_M 0x000000FF // TX Polling 2234#define USB_TXINTERVAL6_NAKLMT_M 0x000000FF // NAK Limit 2235#define USB_TXINTERVAL6_TXPOLL_S 0 2236#define USB_TXINTERVAL6_NAKLMT_S 0 2237 2238//***************************************************************************** 2239// 2240// The following are defines for the bit fields in the USB_O_RXTYPE6 register. 2241// 2242//***************************************************************************** 2243#define USB_RXTYPE6_SPEED_M 0x000000C0 // Operating Speed 2244#define USB_RXTYPE6_SPEED_DFLT 0x00000000 // Default 2245#define USB_RXTYPE6_SPEED_HIGH 0x00000040 // High 2246#define USB_RXTYPE6_SPEED_FULL 0x00000080 // Full 2247#define USB_RXTYPE6_SPEED_LOW 0x000000C0 // Low 2248#define USB_RXTYPE6_PROTO_M 0x00000030 // Protocol 2249#define USB_RXTYPE6_PROTO_CTRL 0x00000000 // Control 2250#define USB_RXTYPE6_PROTO_ISOC 0x00000010 // Isochronous 2251#define USB_RXTYPE6_PROTO_BULK 0x00000020 // Bulk 2252#define USB_RXTYPE6_PROTO_INT 0x00000030 // Interrupt 2253#define USB_RXTYPE6_TEP_M 0x0000000F // Target Endpoint Number 2254#define USB_RXTYPE6_TEP_S 0 2255 2256//***************************************************************************** 2257// 2258// The following are defines for the bit fields in the USB_O_RXINTERVAL6 2259// register. 2260// 2261//***************************************************************************** 2262#define USB_RXINTERVAL6_TXPOLL_M 0x000000FF // RX Polling 2263#define USB_RXINTERVAL6_NAKLMT_M 0x000000FF // NAK Limit 2264#define USB_RXINTERVAL6_NAKLMT_S 0 2265#define USB_RXINTERVAL6_TXPOLL_S 0 2266 2267//***************************************************************************** 2268// 2269// The following are defines for the bit fields in the USB_O_TXMAXP7 register. 2270// 2271//***************************************************************************** 2272#define USB_TXMAXP7_MAXLOAD_M 0x000007FF // Maximum Payload 2273#define USB_TXMAXP7_MAXLOAD_S 0 2274 2275//***************************************************************************** 2276// 2277// The following are defines for the bit fields in the USB_O_TXCSRL7 register. 2278// 2279//***************************************************************************** 2280#define USB_TXCSRL7_NAKTO 0x00000080 // NAK Timeout 2281#define USB_TXCSRL7_CLRDT 0x00000040 // Clear Data Toggle 2282#define USB_TXCSRL7_STALLED 0x00000020 // Endpoint Stalled 2283#define USB_TXCSRL7_STALL 0x00000010 // Send STALL 2284#define USB_TXCSRL7_SETUP 0x00000010 // Setup Packet 2285#define USB_TXCSRL7_FLUSH 0x00000008 // Flush FIFO 2286#define USB_TXCSRL7_ERROR 0x00000004 // Error 2287#define USB_TXCSRL7_UNDRN 0x00000004 // Underrun 2288#define USB_TXCSRL7_FIFONE 0x00000002 // FIFO Not Empty 2289#define USB_TXCSRL7_TXRDY 0x00000001 // Transmit Packet Ready 2290 2291//***************************************************************************** 2292// 2293// The following are defines for the bit fields in the USB_O_TXCSRH7 register. 2294// 2295//***************************************************************************** 2296#define USB_TXCSRH7_AUTOSET 0x00000080 // Auto Set 2297#define USB_TXCSRH7_ISO 0x00000040 // Isochronous Transfers 2298#define USB_TXCSRH7_MODE 0x00000020 // Mode 2299#define USB_TXCSRH7_DMAEN 0x00000010 // DMA Request Enable 2300#define USB_TXCSRH7_FDT 0x00000008 // Force Data Toggle 2301#define USB_TXCSRH7_DMAMOD 0x00000004 // DMA Request Mode 2302#define USB_TXCSRH7_DTWE 0x00000002 // Data Toggle Write Enable 2303#define USB_TXCSRH7_DT 0x00000001 // Data Toggle 2304 2305//***************************************************************************** 2306// 2307// The following are defines for the bit fields in the USB_O_RXMAXP7 register. 2308// 2309//***************************************************************************** 2310#define USB_RXMAXP7_MAXLOAD_M 0x000007FF // Maximum Payload 2311#define USB_RXMAXP7_MAXLOAD_S 0 2312 2313//***************************************************************************** 2314// 2315// The following are defines for the bit fields in the USB_O_RXCSRL7 register. 2316// 2317//***************************************************************************** 2318#define USB_RXCSRL7_CLRDT 0x00000080 // Clear Data Toggle 2319#define USB_RXCSRL7_STALLED 0x00000040 // Endpoint Stalled 2320#define USB_RXCSRL7_REQPKT 0x00000020 // Request Packet 2321#define USB_RXCSRL7_STALL 0x00000020 // Send STALL 2322#define USB_RXCSRL7_FLUSH 0x00000010 // Flush FIFO 2323#define USB_RXCSRL7_DATAERR 0x00000008 // Data Error 2324#define USB_RXCSRL7_NAKTO 0x00000008 // NAK Timeout 2325#define USB_RXCSRL7_ERROR 0x00000004 // Error 2326#define USB_RXCSRL7_OVER 0x00000004 // Overrun 2327#define USB_RXCSRL7_FULL 0x00000002 // FIFO Full 2328#define USB_RXCSRL7_RXRDY 0x00000001 // Receive Packet Ready 2329 2330//***************************************************************************** 2331// 2332// The following are defines for the bit fields in the USB_O_RXCSRH7 register. 2333// 2334//***************************************************************************** 2335#define USB_RXCSRH7_AUTOCL 0x00000080 // Auto Clear 2336#define USB_RXCSRH7_ISO 0x00000040 // Isochronous Transfers 2337#define USB_RXCSRH7_AUTORQ 0x00000040 // Auto Request 2338#define USB_RXCSRH7_DMAEN 0x00000020 // DMA Request Enable 2339#define USB_RXCSRH7_PIDERR 0x00000010 // PID Error 2340#define USB_RXCSRH7_DISNYET 0x00000010 // Disable NYET 2341#define USB_RXCSRH7_DMAMOD 0x00000008 // DMA Request Mode 2342#define USB_RXCSRH7_DTWE 0x00000004 // Data Toggle Write Enable 2343#define USB_RXCSRH7_DT 0x00000002 // Data Toggle 2344#define USB_RXCSRH7_INCOMPRX \ 2345 0x00000001 // Incomplete RX Transmission 2346// Status 2347 2348//***************************************************************************** 2349// 2350// The following are defines for the bit fields in the USB_O_RXCOUNT7 register. 2351// 2352//***************************************************************************** 2353#define USB_RXCOUNT7_COUNT_M 0x00001FFF // Receive Packet Count 2354#define USB_RXCOUNT7_COUNT_S 0 2355 2356//***************************************************************************** 2357// 2358// The following are defines for the bit fields in the USB_O_TXTYPE7 register. 2359// 2360//***************************************************************************** 2361#define USB_TXTYPE7_SPEED_M 0x000000C0 // Operating Speed 2362#define USB_TXTYPE7_SPEED_DFLT 0x00000000 // Default 2363#define USB_TXTYPE7_SPEED_HIGH 0x00000040 // High 2364#define USB_TXTYPE7_SPEED_FULL 0x00000080 // Full 2365#define USB_TXTYPE7_SPEED_LOW 0x000000C0 // Low 2366#define USB_TXTYPE7_PROTO_M 0x00000030 // Protocol 2367#define USB_TXTYPE7_PROTO_CTRL 0x00000000 // Control 2368#define USB_TXTYPE7_PROTO_ISOC 0x00000010 // Isochronous 2369#define USB_TXTYPE7_PROTO_BULK 0x00000020 // Bulk 2370#define USB_TXTYPE7_PROTO_INT 0x00000030 // Interrupt 2371#define USB_TXTYPE7_TEP_M 0x0000000F // Target Endpoint Number 2372#define USB_TXTYPE7_TEP_S 0 2373 2374//***************************************************************************** 2375// 2376// The following are defines for the bit fields in the USB_O_TXINTERVAL7 2377// register. 2378// 2379//***************************************************************************** 2380#define USB_TXINTERVAL7_TXPOLL_M 0x000000FF // TX Polling 2381#define USB_TXINTERVAL7_NAKLMT_M 0x000000FF // NAK Limit 2382#define USB_TXINTERVAL7_NAKLMT_S 0 2383#define USB_TXINTERVAL7_TXPOLL_S 0 2384 2385//***************************************************************************** 2386// 2387// The following are defines for the bit fields in the USB_O_RXTYPE7 register. 2388// 2389//***************************************************************************** 2390#define USB_RXTYPE7_SPEED_M 0x000000C0 // Operating Speed 2391#define USB_RXTYPE7_SPEED_DFLT 0x00000000 // Default 2392#define USB_RXTYPE7_SPEED_HIGH 0x00000040 // High 2393#define USB_RXTYPE7_SPEED_FULL 0x00000080 // Full 2394#define USB_RXTYPE7_SPEED_LOW 0x000000C0 // Low 2395#define USB_RXTYPE7_PROTO_M 0x00000030 // Protocol 2396#define USB_RXTYPE7_PROTO_CTRL 0x00000000 // Control 2397#define USB_RXTYPE7_PROTO_ISOC 0x00000010 // Isochronous 2398#define USB_RXTYPE7_PROTO_BULK 0x00000020 // Bulk 2399#define USB_RXTYPE7_PROTO_INT 0x00000030 // Interrupt 2400#define USB_RXTYPE7_TEP_M 0x0000000F // Target Endpoint Number 2401#define USB_RXTYPE7_TEP_S 0 2402 2403//***************************************************************************** 2404// 2405// The following are defines for the bit fields in the USB_O_RXINTERVAL7 2406// register. 2407// 2408//***************************************************************************** 2409#define USB_RXINTERVAL7_TXPOLL_M 0x000000FF // RX Polling 2410#define USB_RXINTERVAL7_NAKLMT_M 0x000000FF // NAK Limit 2411#define USB_RXINTERVAL7_NAKLMT_S 0 2412#define USB_RXINTERVAL7_TXPOLL_S 0 2413 2414//***************************************************************************** 2415// 2416// The following are defines for the bit fields in the USB_O_DMAINTR register. 2417// 2418//***************************************************************************** 2419#define USB_DMAINTR_CH7 0x00000080 // Channel 7 DMA Interrupt 2420#define USB_DMAINTR_CH6 0x00000040 // Channel 6 DMA Interrupt 2421#define USB_DMAINTR_CH5 0x00000020 // Channel 5 DMA Interrupt 2422#define USB_DMAINTR_CH4 0x00000010 // Channel 4 DMA Interrupt 2423#define USB_DMAINTR_CH3 0x00000008 // Channel 3 DMA Interrupt 2424#define USB_DMAINTR_CH2 0x00000004 // Channel 2 DMA Interrupt 2425#define USB_DMAINTR_CH1 0x00000002 // Channel 1 DMA Interrupt 2426#define USB_DMAINTR_CH0 0x00000001 // Channel 0 DMA Interrupt 2427 2428//***************************************************************************** 2429// 2430// The following are defines for the bit fields in the USB_O_DMACTL0 register. 2431// 2432//***************************************************************************** 2433#define USB_DMACTL0_BRSTM_M 0x00000600 // Burst Mode 2434#define USB_DMACTL0_BRSTM_ANY 0x00000000 // Bursts of unspecified length 2435#define USB_DMACTL0_BRSTM_INC4 0x00000200 // INCR4 or unspecified length 2436#define USB_DMACTL0_BRSTM_INC8 \ 2437 0x00000400 // INCR8, INCR4 or unspecified 2438// length 2439#define USB_DMACTL0_BRSTM_INC16 \ 2440 0x00000600 // INCR16, INCR8, INCR4 or 2441// unspecified length 2442#define USB_DMACTL0_ERR 0x00000100 // Bus Error Bit 2443#define USB_DMACTL0_EP_M 0x000000F0 // Endpoint number 2444#define USB_DMACTL0_IE 0x00000008 // DMA Interrupt Enable 2445#define USB_DMACTL0_MODE 0x00000004 // DMA Transfer Mode 2446#define USB_DMACTL0_DIR 0x00000002 // DMA Direction 2447#define USB_DMACTL0_ENABLE 0x00000001 // DMA Transfer Enable 2448#define USB_DMACTL0_EP_S 4 2449 2450//***************************************************************************** 2451// 2452// The following are defines for the bit fields in the USB_O_DMAADDR0 register. 2453// 2454//***************************************************************************** 2455#define USB_DMAADDR0_ADDR_M 0xFFFFFFFC // DMA Address 2456#define USB_DMAADDR0_ADDR_S 2 2457 2458//***************************************************************************** 2459// 2460// The following are defines for the bit fields in the USB_O_DMACOUNT0 2461// register. 2462// 2463//***************************************************************************** 2464#define USB_DMACOUNT0_COUNT_M 0xFFFFFFFC // DMA Count 2465#define USB_DMACOUNT0_COUNT_S 2 2466 2467//***************************************************************************** 2468// 2469// The following are defines for the bit fields in the USB_O_DMACTL1 register. 2470// 2471//***************************************************************************** 2472#define USB_DMACTL1_BRSTM_M 0x00000600 // Burst Mode 2473#define USB_DMACTL1_BRSTM_ANY 0x00000000 // Bursts of unspecified length 2474#define USB_DMACTL1_BRSTM_INC4 0x00000200 // INCR4 or unspecified length 2475#define USB_DMACTL1_BRSTM_INC8 \ 2476 0x00000400 // INCR8, INCR4 or unspecified 2477// length 2478#define USB_DMACTL1_BRSTM_INC16 \ 2479 0x00000600 // INCR16, INCR8, INCR4 or 2480// unspecified length 2481#define USB_DMACTL1_ERR 0x00000100 // Bus Error Bit 2482#define USB_DMACTL1_EP_M 0x000000F0 // Endpoint number 2483#define USB_DMACTL1_IE 0x00000008 // DMA Interrupt Enable 2484#define USB_DMACTL1_MODE 0x00000004 // DMA Transfer Mode 2485#define USB_DMACTL1_DIR 0x00000002 // DMA Direction 2486#define USB_DMACTL1_ENABLE 0x00000001 // DMA Transfer Enable 2487#define USB_DMACTL1_EP_S 4 2488 2489//***************************************************************************** 2490// 2491// The following are defines for the bit fields in the USB_O_DMAADDR1 register. 2492// 2493//***************************************************************************** 2494#define USB_DMAADDR1_ADDR_M 0xFFFFFFFC // DMA Address 2495#define USB_DMAADDR1_ADDR_S 2 2496 2497//***************************************************************************** 2498// 2499// The following are defines for the bit fields in the USB_O_DMACOUNT1 2500// register. 2501// 2502//***************************************************************************** 2503#define USB_DMACOUNT1_COUNT_M 0xFFFFFFFC // DMA Count 2504#define USB_DMACOUNT1_COUNT_S 2 2505 2506//***************************************************************************** 2507// 2508// The following are defines for the bit fields in the USB_O_DMACTL2 register. 2509// 2510//***************************************************************************** 2511#define USB_DMACTL2_BRSTM_M 0x00000600 // Burst Mode 2512#define USB_DMACTL2_BRSTM_ANY 0x00000000 // Bursts of unspecified length 2513#define USB_DMACTL2_BRSTM_INC4 0x00000200 // INCR4 or unspecified length 2514#define USB_DMACTL2_BRSTM_INC8 \ 2515 0x00000400 // INCR8, INCR4 or unspecified 2516// length 2517#define USB_DMACTL2_BRSTM_INC16 \ 2518 0x00000600 // INCR16, INCR8, INCR4 or 2519// unspecified length 2520#define USB_DMACTL2_ERR 0x00000100 // Bus Error Bit 2521#define USB_DMACTL2_EP_M 0x000000F0 // Endpoint number 2522#define USB_DMACTL2_IE 0x00000008 // DMA Interrupt Enable 2523#define USB_DMACTL2_MODE 0x00000004 // DMA Transfer Mode 2524#define USB_DMACTL2_DIR 0x00000002 // DMA Direction 2525#define USB_DMACTL2_ENABLE 0x00000001 // DMA Transfer Enable 2526#define USB_DMACTL2_EP_S 4 2527 2528//***************************************************************************** 2529// 2530// The following are defines for the bit fields in the USB_O_DMAADDR2 register. 2531// 2532//***************************************************************************** 2533#define USB_DMAADDR2_ADDR_M 0xFFFFFFFC // DMA Address 2534#define USB_DMAADDR2_ADDR_S 2 2535 2536//***************************************************************************** 2537// 2538// The following are defines for the bit fields in the USB_O_DMACOUNT2 2539// register. 2540// 2541//***************************************************************************** 2542#define USB_DMACOUNT2_COUNT_M 0xFFFFFFFC // DMA Count 2543#define USB_DMACOUNT2_COUNT_S 2 2544 2545//***************************************************************************** 2546// 2547// The following are defines for the bit fields in the USB_O_DMACTL3 register. 2548// 2549//***************************************************************************** 2550#define USB_DMACTL3_BRSTM_M 0x00000600 // Burst Mode 2551#define USB_DMACTL3_BRSTM_ANY 0x00000000 // Bursts of unspecified length 2552#define USB_DMACTL3_BRSTM_INC4 0x00000200 // INCR4 or unspecified length 2553#define USB_DMACTL3_BRSTM_INC8 \ 2554 0x00000400 // INCR8, INCR4 or unspecified 2555// length 2556#define USB_DMACTL3_BRSTM_INC16 \ 2557 0x00000600 // INCR16, INCR8, INCR4 or 2558// unspecified length 2559#define USB_DMACTL3_ERR 0x00000100 // Bus Error Bit 2560#define USB_DMACTL3_EP_M 0x000000F0 // Endpoint number 2561#define USB_DMACTL3_IE 0x00000008 // DMA Interrupt Enable 2562#define USB_DMACTL3_MODE 0x00000004 // DMA Transfer Mode 2563#define USB_DMACTL3_DIR 0x00000002 // DMA Direction 2564#define USB_DMACTL3_ENABLE 0x00000001 // DMA Transfer Enable 2565#define USB_DMACTL3_EP_S 4 2566 2567//***************************************************************************** 2568// 2569// The following are defines for the bit fields in the USB_O_DMAADDR3 register. 2570// 2571//***************************************************************************** 2572#define USB_DMAADDR3_ADDR_M 0xFFFFFFFC // DMA Address 2573#define USB_DMAADDR3_ADDR_S 2 2574 2575//***************************************************************************** 2576// 2577// The following are defines for the bit fields in the USB_O_DMACOUNT3 2578// register. 2579// 2580//***************************************************************************** 2581#define USB_DMACOUNT3_COUNT_M 0xFFFFFFFC // DMA Count 2582#define USB_DMACOUNT3_COUNT_S 2 2583 2584//***************************************************************************** 2585// 2586// The following are defines for the bit fields in the USB_O_DMACTL4 register. 2587// 2588//***************************************************************************** 2589#define USB_DMACTL4_BRSTM_M 0x00000600 // Burst Mode 2590#define USB_DMACTL4_BRSTM_ANY 0x00000000 // Bursts of unspecified length 2591#define USB_DMACTL4_BRSTM_INC4 0x00000200 // INCR4 or unspecified length 2592#define USB_DMACTL4_BRSTM_INC8 \ 2593 0x00000400 // INCR8, INCR4 or unspecified 2594// length 2595#define USB_DMACTL4_BRSTM_INC16 \ 2596 0x00000600 // INCR16, INCR8, INCR4 or 2597// unspecified length 2598#define USB_DMACTL4_ERR 0x00000100 // Bus Error Bit 2599#define USB_DMACTL4_EP_M 0x000000F0 // Endpoint number 2600#define USB_DMACTL4_IE 0x00000008 // DMA Interrupt Enable 2601#define USB_DMACTL4_MODE 0x00000004 // DMA Transfer Mode 2602#define USB_DMACTL4_DIR 0x00000002 // DMA Direction 2603#define USB_DMACTL4_ENABLE 0x00000001 // DMA Transfer Enable 2604#define USB_DMACTL4_EP_S 4 2605 2606//***************************************************************************** 2607// 2608// The following are defines for the bit fields in the USB_O_DMAADDR4 register. 2609// 2610//***************************************************************************** 2611#define USB_DMAADDR4_ADDR_M 0xFFFFFFFC // DMA Address 2612#define USB_DMAADDR4_ADDR_S 2 2613 2614//***************************************************************************** 2615// 2616// The following are defines for the bit fields in the USB_O_DMACOUNT4 2617// register. 2618// 2619//***************************************************************************** 2620#define USB_DMACOUNT4_COUNT_M 0xFFFFFFFC // DMA Count 2621#define USB_DMACOUNT4_COUNT_S 2 2622 2623//***************************************************************************** 2624// 2625// The following are defines for the bit fields in the USB_O_DMACTL5 register. 2626// 2627//***************************************************************************** 2628#define USB_DMACTL5_BRSTM_M 0x00000600 // Burst Mode 2629#define USB_DMACTL5_BRSTM_ANY 0x00000000 // Bursts of unspecified length 2630#define USB_DMACTL5_BRSTM_INC4 0x00000200 // INCR4 or unspecified length 2631#define USB_DMACTL5_BRSTM_INC8 \ 2632 0x00000400 // INCR8, INCR4 or unspecified 2633// length 2634#define USB_DMACTL5_BRSTM_INC16 \ 2635 0x00000600 // INCR16, INCR8, INCR4 or 2636// unspecified length 2637#define USB_DMACTL5_ERR 0x00000100 // Bus Error Bit 2638#define USB_DMACTL5_EP_M 0x000000F0 // Endpoint number 2639#define USB_DMACTL5_IE 0x00000008 // DMA Interrupt Enable 2640#define USB_DMACTL5_MODE 0x00000004 // DMA Transfer Mode 2641#define USB_DMACTL5_DIR 0x00000002 // DMA Direction 2642#define USB_DMACTL5_ENABLE 0x00000001 // DMA Transfer Enable 2643#define USB_DMACTL5_EP_S 4 2644 2645//***************************************************************************** 2646// 2647// The following are defines for the bit fields in the USB_O_DMAADDR5 register. 2648// 2649//***************************************************************************** 2650#define USB_DMAADDR5_ADDR_M 0xFFFFFFFC // DMA Address 2651#define USB_DMAADDR5_ADDR_S 2 2652 2653//***************************************************************************** 2654// 2655// The following are defines for the bit fields in the USB_O_DMACOUNT5 2656// register. 2657// 2658//***************************************************************************** 2659#define USB_DMACOUNT5_COUNT_M 0xFFFFFFFC // DMA Count 2660#define USB_DMACOUNT5_COUNT_S 2 2661 2662//***************************************************************************** 2663// 2664// The following are defines for the bit fields in the USB_O_DMACTL6 register. 2665// 2666//***************************************************************************** 2667#define USB_DMACTL6_BRSTM_M 0x00000600 // Burst Mode 2668#define USB_DMACTL6_BRSTM_ANY 0x00000000 // Bursts of unspecified length 2669#define USB_DMACTL6_BRSTM_INC4 0x00000200 // INCR4 or unspecified length 2670#define USB_DMACTL6_BRSTM_INC8 \ 2671 0x00000400 // INCR8, INCR4 or unspecified 2672// length 2673#define USB_DMACTL6_BRSTM_INC16 \ 2674 0x00000600 // INCR16, INCR8, INCR4 or 2675// unspecified length 2676#define USB_DMACTL6_ERR 0x00000100 // Bus Error Bit 2677#define USB_DMACTL6_EP_M 0x000000F0 // Endpoint number 2678#define USB_DMACTL6_IE 0x00000008 // DMA Interrupt Enable 2679#define USB_DMACTL6_MODE 0x00000004 // DMA Transfer Mode 2680#define USB_DMACTL6_DIR 0x00000002 // DMA Direction 2681#define USB_DMACTL6_ENABLE 0x00000001 // DMA Transfer Enable 2682#define USB_DMACTL6_EP_S 4 2683 2684//***************************************************************************** 2685// 2686// The following are defines for the bit fields in the USB_O_DMAADDR6 register. 2687// 2688//***************************************************************************** 2689#define USB_DMAADDR6_ADDR_M 0xFFFFFFFC // DMA Address 2690#define USB_DMAADDR6_ADDR_S 2 2691 2692//***************************************************************************** 2693// 2694// The following are defines for the bit fields in the USB_O_DMACOUNT6 2695// register. 2696// 2697//***************************************************************************** 2698#define USB_DMACOUNT6_COUNT_M 0xFFFFFFFC // DMA Count 2699#define USB_DMACOUNT6_COUNT_S 2 2700 2701//***************************************************************************** 2702// 2703// The following are defines for the bit fields in the USB_O_DMACTL7 register. 2704// 2705//***************************************************************************** 2706#define USB_DMACTL7_BRSTM_M 0x00000600 // Burst Mode 2707#define USB_DMACTL7_BRSTM_ANY 0x00000000 // Bursts of unspecified length 2708#define USB_DMACTL7_BRSTM_INC4 0x00000200 // INCR4 or unspecified length 2709#define USB_DMACTL7_BRSTM_INC8 \ 2710 0x00000400 // INCR8, INCR4 or unspecified 2711// length 2712#define USB_DMACTL7_BRSTM_INC16 \ 2713 0x00000600 // INCR16, INCR8, INCR4 or 2714// unspecified length 2715#define USB_DMACTL7_ERR 0x00000100 // Bus Error Bit 2716#define USB_DMACTL7_EP_M 0x000000F0 // Endpoint number 2717#define USB_DMACTL7_IE 0x00000008 // DMA Interrupt Enable 2718#define USB_DMACTL7_MODE 0x00000004 // DMA Transfer Mode 2719#define USB_DMACTL7_DIR 0x00000002 // DMA Direction 2720#define USB_DMACTL7_ENABLE 0x00000001 // DMA Transfer Enable 2721#define USB_DMACTL7_EP_S 4 2722 2723//***************************************************************************** 2724// 2725// The following are defines for the bit fields in the USB_O_DMAADDR7 register. 2726// 2727//***************************************************************************** 2728#define USB_DMAADDR7_ADDR_M 0xFFFFFFFC // DMA Address 2729#define USB_DMAADDR7_ADDR_S 2 2730 2731//***************************************************************************** 2732// 2733// The following are defines for the bit fields in the USB_O_DMACOUNT7 2734// register. 2735// 2736//***************************************************************************** 2737#define USB_DMACOUNT7_COUNT_M 0xFFFFFFFC // DMA Count 2738#define USB_DMACOUNT7_COUNT_S 2 2739 2740//***************************************************************************** 2741// 2742// The following are defines for the bit fields in the USB_O_RQPKTCOUNT1 2743// register. 2744// 2745//***************************************************************************** 2746#define USB_RQPKTCOUNT1_M 0x0000FFFF // Block Transfer Packet Count 2747#define USB_RQPKTCOUNT1_S 0 2748 2749//***************************************************************************** 2750// 2751// The following are defines for the bit fields in the USB_O_RQPKTCOUNT2 2752// register. 2753// 2754//***************************************************************************** 2755#define USB_RQPKTCOUNT2_M 0x0000FFFF // Block Transfer Packet Count 2756#define USB_RQPKTCOUNT2_S 0 2757 2758//***************************************************************************** 2759// 2760// The following are defines for the bit fields in the USB_O_RQPKTCOUNT3 2761// register. 2762// 2763//***************************************************************************** 2764#define USB_RQPKTCOUNT3_M 0x0000FFFF // Block Transfer Packet Count 2765#define USB_RQPKTCOUNT3_S 0 2766 2767//***************************************************************************** 2768// 2769// The following are defines for the bit fields in the USB_O_RQPKTCOUNT4 2770// register. 2771// 2772//***************************************************************************** 2773#define USB_RQPKTCOUNT4_COUNT_M 0x0000FFFF // Block Transfer Packet Count 2774#define USB_RQPKTCOUNT4_COUNT_S 0 2775 2776//***************************************************************************** 2777// 2778// The following are defines for the bit fields in the USB_O_RQPKTCOUNT5 2779// register. 2780// 2781//***************************************************************************** 2782#define USB_RQPKTCOUNT5_COUNT_M 0x0000FFFF // Block Transfer Packet Count 2783#define USB_RQPKTCOUNT5_COUNT_S 0 2784 2785//***************************************************************************** 2786// 2787// The following are defines for the bit fields in the USB_O_RQPKTCOUNT6 2788// register. 2789// 2790//***************************************************************************** 2791#define USB_RQPKTCOUNT6_COUNT_M 0x0000FFFF // Block Transfer Packet Count 2792#define USB_RQPKTCOUNT6_COUNT_S 0 2793 2794//***************************************************************************** 2795// 2796// The following are defines for the bit fields in the USB_O_RQPKTCOUNT7 2797// register. 2798// 2799//***************************************************************************** 2800#define USB_RQPKTCOUNT7_COUNT_M 0x0000FFFF // Block Transfer Packet Count 2801#define USB_RQPKTCOUNT7_COUNT_S 0 2802 2803//***************************************************************************** 2804// 2805// The following are defines for the bit fields in the USB_O_RXDPKTBUFDIS 2806// register. 2807// 2808//***************************************************************************** 2809#define USB_RXDPKTBUFDIS_EP7 \ 2810 0x00000080 // EP7 RX Double-Packet Buffer 2811// Disable 2812#define USB_RXDPKTBUFDIS_EP6 \ 2813 0x00000040 // EP6 RX Double-Packet Buffer 2814// Disable 2815#define USB_RXDPKTBUFDIS_EP5 \ 2816 0x00000020 // EP5 RX Double-Packet Buffer 2817// Disable 2818#define USB_RXDPKTBUFDIS_EP4 \ 2819 0x00000010 // EP4 RX Double-Packet Buffer 2820// Disable 2821#define USB_RXDPKTBUFDIS_EP3 \ 2822 0x00000008 // EP3 RX Double-Packet Buffer 2823// Disable 2824#define USB_RXDPKTBUFDIS_EP2 \ 2825 0x00000004 // EP2 RX Double-Packet Buffer 2826// Disable 2827#define USB_RXDPKTBUFDIS_EP1 \ 2828 0x00000002 // EP1 RX Double-Packet Buffer 2829// Disable 2830 2831//***************************************************************************** 2832// 2833// The following are defines for the bit fields in the USB_O_TXDPKTBUFDIS 2834// register. 2835// 2836//***************************************************************************** 2837#define USB_TXDPKTBUFDIS_EP7 \ 2838 0x00000080 // EP7 TX Double-Packet Buffer 2839// Disable 2840#define USB_TXDPKTBUFDIS_EP6 \ 2841 0x00000040 // EP6 TX Double-Packet Buffer 2842// Disable 2843#define USB_TXDPKTBUFDIS_EP5 \ 2844 0x00000020 // EP5 TX Double-Packet Buffer 2845// Disable 2846#define USB_TXDPKTBUFDIS_EP4 \ 2847 0x00000010 // EP4 TX Double-Packet Buffer 2848// Disable 2849#define USB_TXDPKTBUFDIS_EP3 \ 2850 0x00000008 // EP3 TX Double-Packet Buffer 2851// Disable 2852#define USB_TXDPKTBUFDIS_EP2 \ 2853 0x00000004 // EP2 TX Double-Packet Buffer 2854// Disable 2855#define USB_TXDPKTBUFDIS_EP1 \ 2856 0x00000002 // EP1 TX Double-Packet Buffer 2857// Disable 2858 2859//***************************************************************************** 2860// 2861// The following are defines for the bit fields in the USB_O_CTO register. 2862// 2863//***************************************************************************** 2864#define USB_CTO_CCTV_M 0x0000FFFF // Configurable Chirp Timeout Value 2865#define USB_CTO_CCTV_S 0 2866 2867//***************************************************************************** 2868// 2869// The following are defines for the bit fields in the USB_O_HHSRTN register. 2870// 2871//***************************************************************************** 2872#define USB_HHSRTN_HHSRTN_M \ 2873 0x0000FFFF // HIgh Speed to UTM Operating 2874// Delay 2875#define USB_HHSRTN_HHSRTN_S 0 2876 2877//***************************************************************************** 2878// 2879// The following are defines for the bit fields in the USB_O_HSBT register. 2880// 2881//***************************************************************************** 2882#define USB_HSBT_HSBT_M 0x0000000F // High Speed Timeout Adder 2883#define USB_HSBT_HSBT_S 0 2884 2885//***************************************************************************** 2886// 2887// The following are defines for the bit fields in the USB_O_LPMATTR register. 2888// 2889//***************************************************************************** 2890#define USB_LPMATTR_ENDPT_M 0x0000F000 // Endpoint 2891#define USB_LPMATTR_RMTWAK 0x00000100 // Remote Wake 2892#define USB_LPMATTR_HIRD_M 0x000000F0 // Host Initiated Resume Duration 2893#define USB_LPMATTR_LS_M 0x0000000F // Link State 2894#define USB_LPMATTR_LS_L1 0x00000001 // Sleep State (L1) 2895#define USB_LPMATTR_ENDPT_S 12 2896#define USB_LPMATTR_HIRD_S 4 2897 2898//***************************************************************************** 2899// 2900// The following are defines for the bit fields in the USB_O_LPMCNTRL register. 2901// 2902//***************************************************************************** 2903#define USB_LPMCNTRL_NAK 0x00000010 // LPM NAK 2904#define USB_LPMCNTRL_EN_M 0x0000000C // LPM Enable 2905#define USB_LPMCNTRL_EN_NONE \ 2906 0x00000000 // LPM and Extended transactions 2907// are not supported. In this case, 2908// the USB does not respond to LPM 2909// transactions and LPM 2910// transactions cause a timeout 2911#define USB_LPMCNTRL_EN_EXT \ 2912 0x00000004 // LPM is not supported but 2913// extended transactions are 2914// supported. In this case, the USB 2915// does respond to an LPM 2916// transaction with a STALL 2917#define USB_LPMCNTRL_EN_LPMEXT \ 2918 0x0000000C // The USB supports LPM extended 2919// transactions. In this case, the 2920// USB responds with a NYET or an 2921// ACK as determined by the value 2922// of TXLPM and other conditions 2923#define USB_LPMCNTRL_RES 0x00000002 // LPM Resume 2924#define USB_LPMCNTRL_TXLPM 0x00000001 // Transmit LPM Transaction Enable 2925 2926//***************************************************************************** 2927// 2928// The following are defines for the bit fields in the USB_O_LPMIM register. 2929// 2930//***************************************************************************** 2931#define USB_LPMIM_ERR 0x00000020 // LPM Error Interrupt Mask 2932#define USB_LPMIM_RES 0x00000010 // LPM Resume Interrupt Mask 2933#define USB_LPMIM_NC 0x00000008 // LPM NC Interrupt Mask 2934#define USB_LPMIM_ACK 0x00000004 // LPM ACK Interrupt Mask 2935#define USB_LPMIM_NY 0x00000002 // LPM NY Interrupt Mask 2936#define USB_LPMIM_STALL 0x00000001 // LPM STALL Interrupt Mask 2937 2938//***************************************************************************** 2939// 2940// The following are defines for the bit fields in the USB_O_LPMRIS register. 2941// 2942//***************************************************************************** 2943#define USB_LPMRIS_ERR 0x00000020 // LPM Interrupt Status 2944#define USB_LPMRIS_RES 0x00000010 // LPM Resume Interrupt Status 2945#define USB_LPMRIS_NC 0x00000008 // LPM NC Interrupt Status 2946#define USB_LPMRIS_ACK 0x00000004 // LPM ACK Interrupt Status 2947#define USB_LPMRIS_NY 0x00000002 // LPM NY Interrupt Status 2948#define USB_LPMRIS_LPMST 0x00000001 // LPM STALL Interrupt Status 2949 2950//***************************************************************************** 2951// 2952// The following are defines for the bit fields in the USB_O_LPMFADDR register. 2953// 2954//***************************************************************************** 2955#define USB_LPMFADDR_ADDR_M 0x0000007F // LPM Function Address 2956#define USB_LPMFADDR_ADDR_S 0 2957 2958//***************************************************************************** 2959// 2960// The following are defines for the bit fields in the USB_O_EPC register. 2961// 2962//***************************************************************************** 2963#define USB_EPC_PFLTACT_M 0x00000300 // Power Fault Action 2964#define USB_EPC_PFLTACT_UNCHG 0x00000000 // Unchanged 2965#define USB_EPC_PFLTACT_TRIS 0x00000100 // Tristate 2966#define USB_EPC_PFLTACT_LOW 0x00000200 // Low 2967#define USB_EPC_PFLTACT_HIGH 0x00000300 // High 2968#define USB_EPC_PFLTAEN 0x00000040 // Power Fault Action Enable 2969#define USB_EPC_PFLTSEN_HIGH 0x00000020 // Power Fault Sense 2970#define USB_EPC_PFLTEN 0x00000010 // Power Fault Input Enable 2971#define USB_EPC_EPENDE 0x00000004 // EPEN Drive Enable 2972#define USB_EPC_EPEN_M \ 2973 0x00000003 // External Power Supply Enable 2974// Configuration 2975#define USB_EPC_EPEN_LOW 0x00000000 // Power Enable Active Low 2976#define USB_EPC_EPEN_HIGH 0x00000001 // Power Enable Active High 2977#define USB_EPC_EPEN_VBLOW \ 2978 0x00000002 // Power Enable High if VBUS Low 2979// (OTG only) 2980#define USB_EPC_EPEN_VBHIGH \ 2981 0x00000003 // Power Enable High if VBUS High 2982// (OTG only) 2983 2984//***************************************************************************** 2985// 2986// The following are defines for the bit fields in the USB_O_EPCRIS register. 2987// 2988//***************************************************************************** 2989#define USB_EPCRIS_PF 0x00000001 // USB Power Fault Interrupt Status 2990 2991//***************************************************************************** 2992// 2993// The following are defines for the bit fields in the USB_O_EPCIM register. 2994// 2995//***************************************************************************** 2996#define USB_EPCIM_PF 0x00000001 // USB Power Fault Interrupt Mask 2997 2998//***************************************************************************** 2999// 3000// The following are defines for the bit fields in the USB_O_EPCISC register. 3001// 3002//***************************************************************************** 3003#define USB_EPCISC_PF \ 3004 0x00000001 // USB Power Fault Interrupt Status 3005// and Clear 3006 3007//***************************************************************************** 3008// 3009// The following are defines for the bit fields in the USB_O_DRRIS register. 3010// 3011//***************************************************************************** 3012#define USB_DRRIS_RESUME 0x00000001 // RESUME Interrupt Status 3013 3014//***************************************************************************** 3015// 3016// The following are defines for the bit fields in the USB_O_DRIM register. 3017// 3018//***************************************************************************** 3019#define USB_DRIM_RESUME 0x00000001 // RESUME Interrupt Mask 3020 3021//***************************************************************************** 3022// 3023// The following are defines for the bit fields in the USB_O_DRISC register. 3024// 3025//***************************************************************************** 3026#define USB_DRISC_RESUME \ 3027 0x00000001 // RESUME Interrupt Status and 3028// Clear 3029 3030//***************************************************************************** 3031// 3032// The following are defines for the bit fields in the USB_O_GPCS register. 3033// 3034//***************************************************************************** 3035#define USB_GPCS_DEVMOD_M 0x00000007 // Device Mode 3036#define USB_GPCS_DEVMOD_OTG 0x00000000 // Use USB0VBUS and USB0ID pin 3037#define USB_GPCS_DEVMOD_HOST 0x00000002 // Force USB0VBUS and USB0ID low 3038#define USB_GPCS_DEVMOD_DEV 0x00000003 // Force USB0VBUS and USB0ID high 3039#define USB_GPCS_DEVMOD_HOSTVBUS \ 3040 0x00000004 // Use USB0VBUS and force USB0ID 3041// low 3042#define USB_GPCS_DEVMOD_DEVVBUS \ 3043 0x00000005 // Use USB0VBUS and force USB0ID 3044// high 3045#define USB_GPCS_DEVMODOTG 0x00000002 // Enable Device Mode 3046#define USB_GPCS_DEVMOD 0x00000001 // Device Mode 3047 3048//***************************************************************************** 3049// 3050// The following are defines for the bit fields in the USB_O_VDC register. 3051// 3052//***************************************************************************** 3053#define USB_VDC_VBDEN 0x00000001 // VBUS Droop Enable 3054 3055//***************************************************************************** 3056// 3057// The following are defines for the bit fields in the USB_O_VDCRIS register. 3058// 3059//***************************************************************************** 3060#define USB_VDCRIS_VD 0x00000001 // VBUS Droop Raw Interrupt Status 3061 3062//***************************************************************************** 3063// 3064// The following are defines for the bit fields in the USB_O_VDCIM register. 3065// 3066//***************************************************************************** 3067#define USB_VDCIM_VD 0x00000001 // VBUS Droop Interrupt Mask 3068 3069//***************************************************************************** 3070// 3071// The following are defines for the bit fields in the USB_O_VDCISC register. 3072// 3073//***************************************************************************** 3074#define USB_VDCISC_VD \ 3075 0x00000001 // VBUS Droop Interrupt Status and 3076// Clear 3077 3078//***************************************************************************** 3079// 3080// The following are defines for the bit fields in the USB_O_IDVRIS register. 3081// 3082//***************************************************************************** 3083#define USB_IDVRIS_ID \ 3084 0x00000001 // ID Valid Detect Raw Interrupt 3085// Status 3086 3087//***************************************************************************** 3088// 3089// The following are defines for the bit fields in the USB_O_IDVIM register. 3090// 3091//***************************************************************************** 3092#define USB_IDVIM_ID 0x00000001 // ID Valid Detect Interrupt Mask 3093 3094//***************************************************************************** 3095// 3096// The following are defines for the bit fields in the USB_O_IDVISC register. 3097// 3098//***************************************************************************** 3099#define USB_IDVISC_ID \ 3100 0x00000001 // ID Valid Detect Interrupt Status 3101// and Clear 3102 3103//***************************************************************************** 3104// 3105// The following are defines for the bit fields in the USB_O_DMASEL register. 3106// 3107//***************************************************************************** 3108#define USB_DMASEL_DMACTX_M 0x00F00000 // DMA C TX Select 3109#define USB_DMASEL_DMACRX_M 0x000F0000 // DMA C RX Select 3110#define USB_DMASEL_DMABTX_M 0x0000F000 // DMA B TX Select 3111#define USB_DMASEL_DMABRX_M 0x00000F00 // DMA B RX Select 3112#define USB_DMASEL_DMAATX_M 0x000000F0 // DMA A TX Select 3113#define USB_DMASEL_DMAARX_M 0x0000000F // DMA A RX Select 3114#define USB_DMASEL_DMACTX_S 20 3115#define USB_DMASEL_DMACRX_S 16 3116#define USB_DMASEL_DMABTX_S 12 3117#define USB_DMASEL_DMABRX_S 8 3118#define USB_DMASEL_DMAATX_S 4 3119#define USB_DMASEL_DMAARX_S 0 3120 3121//***************************************************************************** 3122// 3123// The following are defines for the bit fields in the USB_O_PP register. 3124// 3125//***************************************************************************** 3126#define USB_PP_ECNT_M 0x0000FF00 // Endpoint Count 3127#define USB_PP_USB_M 0x000000C0 // USB Capability 3128#define USB_PP_USB_DEVICE 0x00000040 // DEVICE 3129#define USB_PP_USB_HOSTDEVICE 0x00000080 // HOST 3130#define USB_PP_USB_OTG 0x000000C0 // OTG 3131#define USB_PP_ULPI 0x00000020 // ULPI Present 3132#define USB_PP_PHY 0x00000010 // PHY Present 3133#define USB_PP_TYPE_M 0x0000000F // Controller Type 3134#define USB_PP_TYPE_0 \ 3135 0x00000000 // The first-generation USB 3136// controller 3137#define USB_PP_TYPE_1 \ 3138 0x00000001 // Second-generation USB 3139// controller.The controller 3140// implemented in post Icestorm 3141// devices that use the 3.0 version 3142// of the Mentor controller 3143#define USB_PP_ECNT_S 8 3144 3145//***************************************************************************** 3146// 3147// The following are defines for the bit fields in the USB_O_PC register. 3148// 3149//***************************************************************************** 3150#define USB_PC_ULPIEN 0x00010000 // ULPI Enable 3151 3152//***************************************************************************** 3153// 3154// The following are defines for the bit fields in the USB_O_CC register. 3155// 3156//***************************************************************************** 3157#define USB_CC_CLKEN 0x00000200 // USB Clock Enable 3158#define USB_CC_CSD 0x00000100 // Clock Source/Direction 3159#define USB_CC_CLKDIV_M 0x0000000F // PLL Clock Divisor 3160#define USB_CC_CLKDIV_S 0 3161 3162#endif // __HW_USB_H__