// Timer1.c // Runs on LM4F120/TM4C123 // Use TIMER1 in 32-bit periodic mode to request interrupts at a periodic rate // Daniel Valvano // Last Modified: 3/6/2015 // You can use this timer only if you learn how it works /* This example accompanies the book "Embedded Systems: Real Time Interfacing to Arm Cortex M Microcontrollers", ISBN: 978-1463590154, Jonathan Valvano, copyright (c) 2013 Program 7.5, example 7.6 Copyright 2013 by Jonathan W. Valvano, valvano@mail.utexas.edu You may use, edit, run or distribute this file as long as the above copyright notice remains THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. VALVANO SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. For more information about my classes, my research, and my books, see http://users.ece.utexas.edu/~valvano/ */ #include #include "../inc/Timer1.h" #include "../inc/tm4c123gh6pm.h" void (*PeriodicTask1)(void); // user function extern "C" void TIMER1A_Handler(void); // ***************** TIMER1_Init **************** // Activate TIMER1 interrupts to run user task periodically // Inputs: task is a pointer to a user function // period in units (1/clockfreq) // Outputs: none void Timer1_Init(void(*task)(void), uint32_t period){ SYSCTL_RCGCTIMER_R |= 0x02; // 0) activate TIMER1 PeriodicTask1 = task; // user function TIMER1_CTL_R = 0x00000000; // 1) disable TIMER1A during setup TIMER1_CFG_R = 0x00000000; // 2) configure for 32-bit mode TIMER1_TAMR_R = 0x00000002; // 3) configure for periodic mode, default down-count settings TIMER1_TAILR_R = period-1; // 4) reload value TIMER1_TAPR_R = 0; // 5) bus clock resolution TIMER1_ICR_R = 0x00000001; // 6) clear TIMER1A timeout flag TIMER1_IMR_R = 0x00000001; // 7) arm timeout interrupt NVIC_PRI5_R = (NVIC_PRI5_R&NVIC_PRI5_INT21_M)| NVIC_PRI5_INT21_M; // 8) priority 7 // interrupts enabled in the main program after all devices initialized // vector number 37, interrupt number 21 NVIC_EN0_R = 1<<21; // 9) enable IRQ 21 in NVIC TIMER1_CTL_R = 0x00000001; // 10) enable TIMER1A } extern "C" void TIMER1A_Handler(void); void TIMER1A_Handler(void){ TIMER1_ICR_R = TIMER_ICR_TATOCINT;// acknowledge TIMER1A timeout (*PeriodicTask1)(); // execute user task }