# IGVC Welcome to the UT RAS IGVC repo. This file will give installation/usage instructions. If you want to develop on this repo see our [contributing guide](other_file.md). # Setup First you need to download and install ros by following these two guides: 1. [Install Kinetic](http://wiki.ros.org/kinetic/Installation/Ubuntu) (If you're on 17.04 you'll need to [Install Lunar](http://wiki.ros.org/lunar/Installation/Ubuntu) instead) 2. [Configure Environment](http://wiki.ros.org/ROS/Tutorials/InstallingandConfiguringROSEnvironment) Then clone our repo into the src folder: ``` cd ~/catkin_ws/src git clone https://github.com/ut-ras/IGVC2018.git ``` ...and install the needed dependencies: ``` sudo apt install $(grep -vE "^\s*#" depend | tr "\n" " ") cd ~/catkin_ws/src git clone https://github.com/ros-drivers/rosserial.git catkin_make source install/setup.bash source devel/setup.bash ``` If you want to be able to edit the motor control code on the TM4C you'll need to [install the Energia IDE](http://energia.nu/download/) and the necessary libraries: ``` cd /libraries rosrun rosserial_tivac make_libraries_energia . ```