# IGVC2018 ## Let's get started with our Gazebo Simulation! # <--------------- (Scroll down for Vision) ---------------> ## Navigation Here's some packages you need to install aside from ROS/Gazebo: Gmapping: ```sudo apt-get install ros-kinetic-slam-gmapping```\ Turtlebot: ```sudo apt-get install ros-kinetic-turtlebot```\ Map_server: ```sudo apt-get install ros-kinetic-map-server```\ Amcl: ```sudo apt-get install ros-kinetic-amcl```\ Move_base: ```sudo apt-get install ros-kinetic-move-base``` Run the following commands to setup your workspace: ``` mkdir -p ~/mybot_ws/src cd ~/mybot_ws/src git clone -b simulation https://github.com/ut-ras/IGVC2018.git cd .. catkin_make ``` Edit your bashrc file: ```gedit ~/.bashrc``` Scroll down to the very end and add the following: ``` source /opt/ros/kinetic/setup.bash source ~/mybot_ws/devel/setup.bash ``` Check that you have sourced properly: ```echo $ROS_PACKAGE_PATH /home/youruser/catkin_ws/src:/opt/ros/kinetic/share``` Mapping your first environment: ``` roslaunch mybot_gazebo mybot_world.launch roslaunch mybot_navigation gmapping_demo.launch roslaunch mybot_description mybot_rviz_gmapping.launch roslaunch mybot_navigation mybot_teleop.launch ``` Drive around until the map is deemed satisfactory… DOONT close the gazebo/rviz stuff yet: ``` rosrun map_server map_saver -f ~/mybot_ws/src/mybot_navigation/maps/test_map ``` Save rviz file if you want. It would go inside: ~/mybot_ws/src/mybot_description/rviz Steps to use AMCL package: ``` roslaunch mybot_gazebo mybot_world.launch roslaunch mybot_navigation amcl_demo.launch roslaunch mybot_description mybot_rviz_amcl.launch ``` Under Rviz tools at the top, click 2D Nav Goal then click and hold wherever you want! ## Vision To test the visual processing within the simulation please create your workspace if you have not done so yet: ``` mkdir -p ~/mybot_ws/src cd ~/mybot_ws/src git clone -b simulation https://github.com/ut-ras/IGVC2018.git cd .. catkin_make ``` Next you'll want to edit your bashrc file: ```gedit ~/.bashrc``` Scroll down to the very end and add the following: ``` source /opt/ros/kinetic/setup.bash source ~/mybot_ws/devel/setup.bash export GAZEBO_MODEL_PATH=${HOME}/.gazebo/models:${GAZEBO_MODEL_PATH} export GAZEBO_MODEL_PATH=${HOME}/mybot_ws/src/mybot_gazebo/models:$GAZEBO_MODEL_PATH ``` We have to build our models within Gazebo. To do this, run the simple script in the models folder: ``` cd ~/mybot_ws/src/IGVC2018/mybot_gazebo/models sudo ./install_models.sh ``` Run the following launch files: ``` roslaunch mybot_gazebo igvc_world.launch roslaunch mybot_description mybot_rviz.launch roslaunch vision camerafeed.launch ``` And now you're set! Feel free to play around with the camera angles and other parameters. This is primarily for testing vision software only. No path planning or cmd_vel commands are currently being published. **Spicy Tip:** Move the model vehicle to the inside of a lane to detect lanes on rviz.