# IGVC Welcome to the UT RAS IGVC repo. This file will give installation/usage instructions. If you want to develop on this repo see our [contributing guide](other_file.md). # Setup First you need to download and install ros by following these two guides: 1. [Install Kinetic](http://wiki.ros.org/kinetic/Installation/Ubuntu) (If you're on 17.04 you'll need to [Install Lunar](http://wiki.ros.org/lunar/Installation/Ubuntu) instead) 2. [Configure Environment](http://wiki.ros.org/ROS/Tutorials/InstallingandConfiguringROSEnvironment) Then clone our repo into the src folder: ``` cd ~/catkin_ws/src git clone https://github.com/ut-ras/IGVC2018.git ``` It isn't necessary to run the codebase but if you want to be able to edit the code on the microcontroller, you'll need to [install the Energia IDE](http://energia.nu/download/) ``` sudo apt install xboxdrv cd catkin_ws/src sudo apt install python-serial cd ~/catkin_ws/src git clone https://github.com/ros-drivers/rosserial.git cd .. catkin_make catkin_make install source install/setup.bash source devel/setup.bash ``` If you get Energia you'll need to build the libraries for it: ``` cd /libraries rosrun rosserial_tivac make_libraries_energia . ``` To check if it works, run the manual control launch file: ``` roslaunch motor manual.launch ```