collab/mm20

git clone https://git.julia.blue/collab/mm20

Zachary Bouthilletteactually adding ccs projecta795158

firmware
8.3 KiB153 linesraw
1#include <stdbool.h>
2#include <stdint.h>
3//*****************************************************************************
4//
5// hw_memmap.h - Macros defining the memory map of the device.
6//
7// Copyright (c) 2005-2017 Texas Instruments Incorporated.  All rights reserved.
8// Software License Agreement
9// 
10//   Redistribution and use in source and binary forms, with or without
11//   modification, are permitted provided that the following conditions
12//   are met:
13// 
14//   Redistributions of source code must retain the above copyright
15//   notice, this list of conditions and the following disclaimer.
16// 
17//   Redistributions in binary form must reproduce the above copyright
18//   notice, this list of conditions and the following disclaimer in the
19//   documentation and/or other materials provided with the  
20//   distribution.
21// 
22//   Neither the name of Texas Instruments Incorporated nor the names of
23//   its contributors may be used to endorse or promote products derived
24//   from this software without specific prior written permission.
25// 
26// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
27// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
28// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
29// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
30// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
31// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
32// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
33// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
34// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
35// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
36// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
37// 
38// This is part of revision 2.1.4.178 of the Tiva Firmware Development Package.
39//
40//*****************************************************************************
41
42#ifndef __HW_MEMMAP_H__
43#define __HW_MEMMAP_H__
44
45//*****************************************************************************
46//
47// The following are defines for the base address of the memories and
48// peripherals.
49//
50//*****************************************************************************
51#define FLASH_BASE              0x00000000  // FLASH memory
52#define SRAM_BASE               0x20000000  // SRAM memory
53#define WATCHDOG0_BASE          0x40000000  // Watchdog0
54#define WATCHDOG1_BASE          0x40001000  // Watchdog1
55#define GPIO_PORTA_BASE         0x40004000  // GPIO Port A
56#define GPIO_PORTB_BASE         0x40005000  // GPIO Port B
57#define GPIO_PORTC_BASE         0x40006000  // GPIO Port C
58#define GPIO_PORTD_BASE         0x40007000  // GPIO Port D
59#define SSI0_BASE               0x40008000  // SSI0
60#define SSI1_BASE               0x40009000  // SSI1
61#define SSI2_BASE               0x4000A000  // SSI2
62#define SSI3_BASE               0x4000B000  // SSI3
63#define UART0_BASE              0x4000C000  // UART0
64#define UART1_BASE              0x4000D000  // UART1
65#define UART2_BASE              0x4000E000  // UART2
66#define UART3_BASE              0x4000F000  // UART3
67#define UART4_BASE              0x40010000  // UART4
68#define UART5_BASE              0x40011000  // UART5
69#define UART6_BASE              0x40012000  // UART6
70#define UART7_BASE              0x40013000  // UART7
71#define I2C0_BASE               0x40020000  // I2C0
72#define I2C1_BASE               0x40021000  // I2C1
73#define I2C2_BASE               0x40022000  // I2C2
74#define I2C3_BASE               0x40023000  // I2C3
75#define GPIO_PORTE_BASE         0x40024000  // GPIO Port E
76#define GPIO_PORTF_BASE         0x40025000  // GPIO Port F
77#define GPIO_PORTG_BASE         0x40026000  // GPIO Port G
78#define GPIO_PORTH_BASE         0x40027000  // GPIO Port H
79#define PWM0_BASE               0x40028000  // Pulse Width Modulator (PWM)
80#define PWM1_BASE               0x40029000  // Pulse Width Modulator (PWM)
81#define QEI0_BASE               0x4002C000  // QEI0
82#define QEI1_BASE               0x4002D000  // QEI1
83#define TIMER0_BASE             0x40030000  // Timer0
84#define TIMER1_BASE             0x40031000  // Timer1
85#define TIMER2_BASE             0x40032000  // Timer2
86#define TIMER3_BASE             0x40033000  // Timer3
87#define TIMER4_BASE             0x40034000  // Timer4
88#define TIMER5_BASE             0x40035000  // Timer5
89#define WTIMER0_BASE            0x40036000  // Wide Timer0
90#define WTIMER1_BASE            0x40037000  // Wide Timer1
91#define ADC0_BASE               0x40038000  // ADC0
92#define ADC1_BASE               0x40039000  // ADC1
93#define COMP_BASE               0x4003C000  // Analog comparators
94#define GPIO_PORTJ_BASE         0x4003D000  // GPIO Port J
95#define CAN0_BASE               0x40040000  // CAN0
96#define CAN1_BASE               0x40041000  // CAN1
97#define WTIMER2_BASE            0x4004C000  // Wide Timer2
98#define WTIMER3_BASE            0x4004D000  // Wide Timer3
99#define WTIMER4_BASE            0x4004E000  // Wide Timer4
100#define WTIMER5_BASE            0x4004F000  // Wide Timer5
101#define USB0_BASE               0x40050000  // USB 0 Controller
102#define GPIO_PORTA_AHB_BASE     0x40058000  // GPIO Port A (high speed)
103#define GPIO_PORTB_AHB_BASE     0x40059000  // GPIO Port B (high speed)
104#define GPIO_PORTC_AHB_BASE     0x4005A000  // GPIO Port C (high speed)
105#define GPIO_PORTD_AHB_BASE     0x4005B000  // GPIO Port D (high speed)
106#define GPIO_PORTE_AHB_BASE     0x4005C000  // GPIO Port E (high speed)
107#define GPIO_PORTF_AHB_BASE     0x4005D000  // GPIO Port F (high speed)
108#define GPIO_PORTG_AHB_BASE     0x4005E000  // GPIO Port G (high speed)
109#define GPIO_PORTH_AHB_BASE     0x4005F000  // GPIO Port H (high speed)
110#define GPIO_PORTJ_AHB_BASE     0x40060000  // GPIO Port J (high speed)
111#define GPIO_PORTK_BASE         0x40061000  // GPIO Port K
112#define GPIO_PORTL_BASE         0x40062000  // GPIO Port L
113#define GPIO_PORTM_BASE         0x40063000  // GPIO Port M
114#define GPIO_PORTN_BASE         0x40064000  // GPIO Port N
115#define GPIO_PORTP_BASE         0x40065000  // GPIO Port P
116#define GPIO_PORTQ_BASE         0x40066000  // GPIO Port Q
117#define GPIO_PORTR_BASE         0x40067000  // General-Purpose Input/Outputs
118                                            // (GPIOs)
119#define GPIO_PORTS_BASE         0x40068000  // General-Purpose Input/Outputs
120                                            // (GPIOs)
121#define GPIO_PORTT_BASE         0x40069000  // General-Purpose Input/Outputs
122                                            // (GPIOs)
123#define EEPROM_BASE             0x400AF000  // EEPROM memory
124#define ONEWIRE0_BASE           0x400B6000  // 1-Wire Master Module
125#define I2C8_BASE               0x400B8000  // I2C8
126#define I2C9_BASE               0x400B9000  // I2C9
127#define I2C4_BASE               0x400C0000  // I2C4
128#define I2C5_BASE               0x400C1000  // I2C5
129#define I2C6_BASE               0x400C2000  // I2C6
130#define I2C7_BASE               0x400C3000  // I2C7
131#define EPI0_BASE               0x400D0000  // EPI0
132#define TIMER6_BASE             0x400E0000  // General-Purpose Timers
133#define TIMER7_BASE             0x400E1000  // General-Purpose Timers
134#define EMAC0_BASE              0x400EC000  // Ethernet Controller
135#define SYSEXC_BASE             0x400F9000  // System Exception Module
136#define HIB_BASE                0x400FC000  // Hibernation Module
137#define FLASH_CTRL_BASE         0x400FD000  // FLASH Controller
138#define SYSCTL_BASE             0x400FE000  // System Control
139#define UDMA_BASE               0x400FF000  // uDMA Controller
140#define CCM0_BASE               0x44030000  // Cyclical Redundancy Check (CRC)
141#define SHAMD5_BASE             0x44034000  // SHA/MD5 Accelerator
142#define AES_BASE                0x44036000  // Advance Encryption
143                                            // Hardware-Accelerated Module
144#define DES_BASE                0x44038000  // Data Encryption Standard
145                                            // Accelerator (DES)
146#define LCD0_BASE               0x44050000  // LCD Controller
147#define ITM_BASE                0xE0000000  // Instrumentation Trace Macrocell
148#define DWT_BASE                0xE0001000  // Data Watchpoint and Trace
149#define FPB_BASE                0xE0002000  // FLASH Patch and Breakpoint
150#define NVIC_BASE               0xE000E000  // Nested Vectored Interrupt Ctrl
151#define TPIU_BASE               0xE0040000  // Trace Port Interface Unit
152
153#endif // __HW_MEMMAP_H__