fork/rust
git clone https://git.julia.blue/fork/rust
5e1a799842b
1.41.0
1/* This symbol is used at runtime to figure out the virtual address that the */ 2/* enclave is loaded at. */ 3.section absolute 4.global IMAGE_BASE 5IMAGE_BASE: 6 7.section ".note.x86_64-fortanix-unknown-sgx", "", @note 8 .align 4 9 .long 1f - 0f /* name length (not including padding) */ 10 .long 3f - 2f /* desc length (not including padding) */ 11 .long 1 /* type = NT_VERSION */ 120: .asciz "toolchain-version" /* name */ 131: .align 4 142: .long 0 /* desc - toolchain version number, 32-bit LE */ 153: .align 4 16 17.section .rodata 18/* The XSAVE area needs to be a large chunk of readable memory, but since we are */ 19/* going to restore everything to its initial state (XSTATE_BV=0), only certain */ 20/* parts need to have a defined value. In particular: */ 21/* */ 22/* * MXCSR in the legacy area. This register is always restored if RFBM[1] or */ 23/* RFBM[2] is set, regardless of the value of XSTATE_BV */ 24/* * XSAVE header */ 25.align 64 26.Lxsave_clear: 27.org .+24 28.Lxsave_mxcsr: 29 .int 0 30 31/* We can store a bunch of data in the gap between MXCSR and the XSAVE header */ 32 33/* The following symbols point at read-only data that will be filled in by the */ 34/* post-linker. */ 35 36/* When using this macro, don't forget to adjust the linker version script! */ 37.macro globvar name:req size:req 38 .global \name 39 .protected \name 40 .align \size 41 .size \name , \size 42 \name : 43 .org .+\size 44.endm 45 /* The base address (relative to enclave start) of the heap area */ 46 globvar HEAP_BASE 8 47 /* The heap size in bytes */ 48 globvar HEAP_SIZE 8 49 /* Value of the RELA entry in the dynamic table */ 50 globvar RELA 8 51 /* Value of the RELACOUNT entry in the dynamic table */ 52 globvar RELACOUNT 8 53 /* The enclave size in bytes */ 54 globvar ENCLAVE_SIZE 8 55 /* The base address (relative to enclave start) of the enclave configuration area */ 56 globvar CFGDATA_BASE 8 57 /* Non-zero if debugging is enabled, zero otherwise */ 58 globvar DEBUG 1 59 /* The base address (relative to enclave start) of the enclave text section */ 60 globvar TEXT_BASE 8 61 /* The size in bytes of enclacve text section */ 62 globvar TEXT_SIZE 8 63 /* The base address (relative to enclave start) of the enclave EH_FRM_HDR section */ 64 globvar EH_FRM_HDR_BASE 8 65 /* The size in bytes of enclacve EH_FRM_HDR section */ 66 globvar EH_FRM_HDR_SIZE 8 67 68.org .Lxsave_clear+512 69.Lxsave_header: 70 .int 0, 0 /* XSTATE_BV */ 71 .int 0, 0 /* XCOMP_BV */ 72 .org .+48 /* reserved bits */ 73 74.data 75.Laborted: 76 .byte 0 77 78/* TCS local storage section */ 79.equ tcsls_tos, 0x00 /* initialized by loader to *offset* from image base to TOS */ 80.equ tcsls_flags, 0x08 /* initialized by loader */ 81.equ tcsls_flag_secondary, 0 /* initialized by loader; 0 = standard TCS, 1 = secondary TCS */ 82.equ tcsls_flag_init_once, 1 /* initialized by loader to 0 */ 83/* 14 unused bits */ 84.equ tcsls_user_fcw, 0x0a 85.equ tcsls_user_mxcsr, 0x0c 86.equ tcsls_last_rsp, 0x10 /* initialized by loader to 0 */ 87.equ tcsls_panic_last_rsp, 0x18 /* initialized by loader to 0 */ 88.equ tcsls_debug_panic_buf_ptr, 0x20 /* initialized by loader to 0 */ 89.equ tcsls_user_rsp, 0x28 90.equ tcsls_user_retip, 0x30 91.equ tcsls_user_rbp, 0x38 92.equ tcsls_user_r12, 0x40 93.equ tcsls_user_r13, 0x48 94.equ tcsls_user_r14, 0x50 95.equ tcsls_user_r15, 0x58 96.equ tcsls_tls_ptr, 0x60 97.equ tcsls_tcs_addr, 0x68 98 99.macro load_tcsls_flag_secondary_bool reg:req comments:vararg 100 .ifne tcsls_flag_secondary /* to convert to a bool, must be the first bit */ 101 .abort 102 .endif 103 mov $(1<<tcsls_flag_secondary),%e\reg 104 and %gs:tcsls_flags,%\reg 105.endm 106 107/* We place the ELF entry point in a separate section so it can be removed by 108 elf2sgxs */ 109.section .text_no_sgx, "ax" 110.Lelf_entry_error_msg: 111 .ascii "Error: This file is an SGX enclave which cannot be executed as a standard Linux binary.\nSee the installation guide at https://edp.fortanix.com/docs/installation/guide/ on how to use 'cargo run' or follow the steps at https://edp.fortanix.com/docs/tasks/deployment/ for manual deployment.\n" 112.Lelf_entry_error_msg_end: 113 114.global elf_entry 115.type elf_entry,function 116elf_entry: 117/* print error message */ 118 movq $2,%rdi /* write to stderr (fd 2) */ 119 lea .Lelf_entry_error_msg(%rip),%rsi 120 movq $.Lelf_entry_error_msg_end-.Lelf_entry_error_msg,%rdx 121.Lelf_entry_call: 122 movq $1,%rax /* write() syscall */ 123 syscall 124 test %rax,%rax 125 jle .Lelf_exit /* exit on error */ 126 add %rax,%rsi 127 sub %rax,%rdx /* all chars written? */ 128 jnz .Lelf_entry_call 129 130.Lelf_exit: 131 movq $60,%rax /* exit() syscall */ 132 movq $1,%rdi /* exit code 1 */ 133 syscall 134 ud2 /* should not be reached */ 135/* end elf_entry */ 136 137.text 138.global sgx_entry 139.type sgx_entry,function 140sgx_entry: 141/* save user registers */ 142 mov %rcx,%gs:tcsls_user_retip 143 mov %rsp,%gs:tcsls_user_rsp 144 mov %rbp,%gs:tcsls_user_rbp 145 mov %r12,%gs:tcsls_user_r12 146 mov %r13,%gs:tcsls_user_r13 147 mov %r14,%gs:tcsls_user_r14 148 mov %r15,%gs:tcsls_user_r15 149 mov %rbx,%gs:tcsls_tcs_addr 150 stmxcsr %gs:tcsls_user_mxcsr 151 fnstcw %gs:tcsls_user_fcw 152 153/* reset user state */ 154/* - DF flag: x86-64 ABI requires DF to be unset at function entry/exit */ 155/* - AC flag: AEX on misaligned memory accesses leaks side channel info */ 156 pushfq 157 andq $~0x40400, (%rsp) 158 popfq 159 160/* check for debug buffer pointer */ 161 testb $0xff,DEBUG(%rip) 162 jz .Lskip_debug_init 163 mov %r10,%gs:tcsls_debug_panic_buf_ptr 164.Lskip_debug_init: 165/* check for abort */ 166 bt $0,.Laborted(%rip) 167 jc .Lreentry_panic 168/* check if returning from usercall */ 169 mov %gs:tcsls_last_rsp,%r11 170 test %r11,%r11 171 jnz .Lusercall_ret 172/* setup stack */ 173 mov %gs:tcsls_tos,%rsp /* initially, RSP is not set to the correct value */ 174 /* here. This is fixed below under "adjust stack". */ 175/* check for thread init */ 176 bts $tcsls_flag_init_once,%gs:tcsls_flags 177 jc .Lskip_init 178/* adjust stack */ 179 lea IMAGE_BASE(%rip),%rax 180 add %rax,%rsp 181 mov %rsp,%gs:tcsls_tos 182/* call tcs_init */ 183/* store caller-saved registers in callee-saved registers */ 184 mov %rdi,%rbx 185 mov %rsi,%r12 186 mov %rdx,%r13 187 mov %r8,%r14 188 mov %r9,%r15 189 load_tcsls_flag_secondary_bool di /* RDI = tcs_init() argument: secondary: bool */ 190 call tcs_init 191/* reload caller-saved registers */ 192 mov %rbx,%rdi 193 mov %r12,%rsi 194 mov %r13,%rdx 195 mov %r14,%r8 196 mov %r15,%r9 197.Lskip_init: 198/* call into main entry point */ 199 load_tcsls_flag_secondary_bool cx /* RCX = entry() argument: secondary: bool */ 200 call entry /* RDI, RSI, RDX, R8, R9 passed in from userspace */ 201 mov %rax,%rsi /* RSI = return value */ 202 /* NOP: mov %rdx,%rdx */ /* RDX = return value */ 203 xor %rdi,%rdi /* RDI = normal exit */ 204.Lexit: 205/* clear general purpose register state */ 206 /* RAX overwritten by ENCLU */ 207 /* RBX set later */ 208 /* RCX overwritten by ENCLU */ 209 /* RDX contains return value */ 210 /* RSP set later */ 211 /* RBP set later */ 212 /* RDI contains exit mode */ 213 /* RSI contains return value */ 214 xor %r8,%r8 215 xor %r9,%r9 216 xor %r10,%r10 217 xor %r11,%r11 218 /* R12 ~ R15 set by sgx_exit */ 219.Lsgx_exit: 220/* clear extended register state */ 221 mov %rdx, %rcx /* save RDX */ 222 mov $-1, %rax 223 mov %rax, %rdx 224 xrstor .Lxsave_clear(%rip) 225 mov %rcx, %rdx /* restore RDX */ 226/* clear flags */ 227 pushq $0 228 popfq 229/* restore user registers */ 230 mov %gs:tcsls_user_r12,%r12 231 mov %gs:tcsls_user_r13,%r13 232 mov %gs:tcsls_user_r14,%r14 233 mov %gs:tcsls_user_r15,%r15 234 mov %gs:tcsls_user_retip,%rbx 235 mov %gs:tcsls_user_rsp,%rsp 236 mov %gs:tcsls_user_rbp,%rbp 237 fldcw %gs:tcsls_user_fcw 238 ldmxcsr %gs:tcsls_user_mxcsr 239/* exit enclave */ 240 mov $0x4,%eax /* EEXIT */ 241 enclu 242/* end sgx_entry */ 243 244.Lreentry_panic: 245 orq $8,%rsp 246 jmp abort_reentry 247 248/* This *MUST* be called with 6 parameters, otherwise register information */ 249/* might leak! */ 250.global usercall 251usercall: 252 test %rcx,%rcx /* check `abort` function argument */ 253 jnz .Lusercall_abort /* abort is set, jump to abort code (unlikely forward conditional) */ 254 jmp .Lusercall_save_state /* non-aborting usercall */ 255.Lusercall_abort: 256/* set aborted bit */ 257 movb $1,.Laborted(%rip) 258/* save registers in DEBUG mode, so that debugger can reconstruct the stack */ 259 testb $0xff,DEBUG(%rip) 260 jz .Lusercall_noreturn 261.Lusercall_save_state: 262/* save callee-saved state */ 263 push %r15 264 push %r14 265 push %r13 266 push %r12 267 push %rbp 268 push %rbx 269 sub $8, %rsp 270 fstcw 4(%rsp) 271 stmxcsr (%rsp) 272 movq %rsp,%gs:tcsls_last_rsp 273.Lusercall_noreturn: 274/* clear general purpose register state */ 275 /* RAX overwritten by ENCLU */ 276 /* RBX set by sgx_exit */ 277 /* RCX overwritten by ENCLU */ 278 /* RDX contains parameter */ 279 /* RSP set by sgx_exit */ 280 /* RBP set by sgx_exit */ 281 /* RDI contains parameter */ 282 /* RSI contains parameter */ 283 /* R8 contains parameter */ 284 /* R9 contains parameter */ 285 xor %r10,%r10 286 xor %r11,%r11 287 /* R12 ~ R15 set by sgx_exit */ 288/* extended registers/flags cleared by sgx_exit */ 289/* exit */ 290 jmp .Lsgx_exit 291.Lusercall_ret: 292 movq $0,%gs:tcsls_last_rsp 293/* restore callee-saved state, cf. "save" above */ 294 mov %r11,%rsp 295 ldmxcsr (%rsp) 296 fldcw 4(%rsp) 297 add $8, %rsp 298 pop %rbx 299 pop %rbp 300 pop %r12 301 pop %r13 302 pop %r14 303 pop %r15 304/* return */ 305 mov %rsi,%rax /* RAX = return value */ 306 /* NOP: mov %rdx,%rdx */ /* RDX = return value */ 307 ret 308 309/* 310The following functions need to be defined externally: 311``` 312// Called by entry code on re-entry after exit 313extern "C" fn abort_reentry() -> !; 314 315// Called once when a TCS is first entered 316extern "C" fn tcs_init(secondary: bool); 317 318// Standard TCS entrypoint 319extern "C" fn entry(p1: u64, p2: u64, p3: u64, secondary: bool, p4: u64, p5: u64) -> (u64, u64); 320``` 321*/ 322 323.global get_tcs_addr 324get_tcs_addr: 325 mov %gs:tcsls_tcs_addr,%rax 326 ret 327 328.global get_tls_ptr 329get_tls_ptr: 330 mov %gs:tcsls_tls_ptr,%rax 331 ret 332 333.global set_tls_ptr 334set_tls_ptr: 335 mov %rdi,%gs:tcsls_tls_ptr 336 ret 337 338.global take_debug_panic_buf_ptr 339take_debug_panic_buf_ptr: 340 xor %rax,%rax 341 xchg %gs:tcsls_debug_panic_buf_ptr,%rax 342 ret