fork/rust
git clone https://git.julia.blue/fork/rust
f3e1a954d2e
1.41.1
1# Sample TOML configuration file for building Rust. 2# 3# To configure rustbuild, copy this file to the directory from which you will be 4# running the build, and name it config.toml. 5# 6# All options are commented out by default in this file, and they're commented 7# out with their default values. The build system by default looks for 8# `config.toml` in the current directory of a build for build configuration, but 9# a custom configuration file can also be specified with `--config` to the build 10# system. 11 12# ============================================================================= 13# Tweaking how LLVM is compiled 14# ============================================================================= 15[llvm] 16 17# Indicates whether the LLVM build is a Release or Debug build 18#optimize = true 19 20# Indicates whether LLVM should be built with ThinLTO. Note that this will 21# only succeed if you use clang, lld, llvm-ar, and llvm-ranlib in your C/C++ 22# toolchain (see the `cc`, `cxx`, `linker`, `ar`, and `ranlib` options below). 23# More info at: https://clang.llvm.org/docs/ThinLTO.html#clang-bootstrap 24#thin-lto = false 25 26# Indicates whether an LLVM Release build should include debug info 27#release-debuginfo = false 28 29# Indicates whether the LLVM assertions are enabled or not 30#assertions = false 31 32# Indicates whether ccache is used when building LLVM 33#ccache = false 34# or alternatively ... 35#ccache = "/path/to/ccache" 36 37# If an external LLVM root is specified, we automatically check the version by 38# default to make sure it's within the range that we're expecting, but setting 39# this flag will indicate that this version check should not be done. 40#version-check = true 41 42# Link libstdc++ statically into the librustc_llvm instead of relying on a 43# dynamic version to be available. 44#static-libstdcpp = false 45 46# Tell the LLVM build system to use Ninja instead of the platform default for 47# the generated build system. This can sometimes be faster than make, for 48# example. 49#ninja = false 50 51# LLVM targets to build support for. 52# Note: this is NOT related to Rust compilation targets. However, as Rust is 53# dependent on LLVM for code generation, turning targets off here WILL lead to 54# the resulting rustc being unable to compile for the disabled architectures. 55# Also worth pointing out is that, in case support for new targets are added to 56# LLVM, enabling them here doesn't mean Rust is automatically gaining said 57# support. You'll need to write a target specification at least, and most 58# likely, teach rustc about the C ABI of the target. Get in touch with the 59# Rust team and file an issue if you need assistance in porting! 60#targets = "AArch64;ARM;Hexagon;MSP430;Mips;NVPTX;PowerPC;RISCV;Sparc;SystemZ;WebAssembly;X86" 61 62# LLVM experimental targets to build support for. These targets are specified in 63# the same format as above, but since these targets are experimental, they are 64# not built by default and the experimental Rust compilation targets that depend 65# on them will not work unless the user opts in to building them. 66#experimental-targets = "" 67 68# Cap the number of parallel linker invocations when compiling LLVM. 69# This can be useful when building LLVM with debug info, which significantly 70# increases the size of binaries and consequently the memory required by 71# each linker process. 72# If absent or 0, linker invocations are treated like any other job and 73# controlled by rustbuild's -j parameter. 74#link-jobs = 0 75 76# When invoking `llvm-config` this configures whether the `--shared` argument is 77# passed to prefer linking to shared libraries. 78#link-shared = false 79 80# When building llvm, this configures what is being appended to the version. 81# If absent, we let the version as-is. 82#version-suffix = "-rust" 83 84# On MSVC you can compile LLVM with clang-cl, but the test suite doesn't pass 85# with clang-cl, so this is special in that it only compiles LLVM with clang-cl 86#clang-cl = '/path/to/clang-cl.exe' 87 88# Pass extra compiler and linker flags to the LLVM CMake build. 89#cflags = "-fextra-flag" 90#cxxflags = "-fextra-flag" 91#ldflags = "-Wl,extra-flag" 92 93# Use libc++ when building LLVM instead of libstdc++. This is the default on 94# platforms already use libc++ as the default C++ library, but this option 95# allows you to use libc++ even on platforms when it's not. You need to ensure 96# that your host compiler ships with libc++. 97#use-libcxx = true 98 99# The value specified here will be passed as `-DLLVM_USE_LINKER` to CMake. 100#use-linker = "lld" 101 102# Whether or not to specify `-DLLVM_TEMPORARILY_ALLOW_OLD_TOOLCHAIN=YES` 103#allow-old-toolchain = false 104 105# ============================================================================= 106# General build configuration options 107# ============================================================================= 108[build] 109 110# Build triple for the original snapshot compiler. This must be a compiler that 111# nightlies are already produced for. The current platform must be able to run 112# binaries of this build triple and the nightly will be used to bootstrap the 113# first compiler. 114#build = "x86_64-unknown-linux-gnu" # defaults to your host platform 115 116# In addition to the build triple, other triples to produce full compiler 117# toolchains for. Each of these triples will be bootstrapped from the build 118# triple and then will continue to bootstrap themselves. This platform must 119# currently be able to run all of the triples provided here. 120#host = ["x86_64-unknown-linux-gnu"] # defaults to just the build triple 121 122# In addition to all host triples, other triples to produce the standard library 123# for. Each host triple will be used to produce a copy of the standard library 124# for each target triple. 125#target = ["x86_64-unknown-linux-gnu"] # defaults to just the build triple 126 127# Instead of downloading the src/stage0.txt version of Cargo specified, use 128# this Cargo binary instead to build all Rust code 129#cargo = "/path/to/bin/cargo" 130 131# Instead of downloading the src/stage0.txt version of the compiler 132# specified, use this rustc binary instead as the stage0 snapshot compiler. 133#rustc = "/path/to/bin/rustc" 134 135# Flag to specify whether any documentation is built. If false, rustdoc and 136# friends will still be compiled but they will not be used to generate any 137# documentation. 138#docs = true 139 140# Indicate whether the compiler should be documented in addition to the standard 141# library and facade crates. 142#compiler-docs = false 143 144# Indicate whether git submodules are managed and updated automatically. 145#submodules = true 146 147# Update git submodules only when the checked out commit in the submodules differs 148# from what is committed in the main rustc repo. 149#fast-submodules = true 150 151# The path to (or name of) the GDB executable to use. This is only used for 152# executing the debuginfo test suite. 153#gdb = "gdb" 154 155# The node.js executable to use. Note that this is only used for the emscripten 156# target when running tests, otherwise this can be omitted. 157#nodejs = "node" 158 159# Python interpreter to use for various tasks throughout the build, notably 160# rustdoc tests, the lldb python interpreter, and some dist bits and pieces. 161# Note that Python 2 is currently required. 162# 163# Defaults to python2.7, then python2. If neither executable can be found, then 164# it defaults to the Python interpreter used to execute x.py. 165#python = "python2.7" 166 167# Force Cargo to check that Cargo.lock describes the precise dependency 168# set that all the Cargo.toml files create, instead of updating it. 169#locked-deps = false 170 171# Indicate whether the vendored sources are used for Rust dependencies or not 172#vendor = false 173 174# Typically the build system will build the rust compiler twice. The second 175# compiler, however, will simply use its own libraries to link against. If you 176# would rather to perform a full bootstrap, compiling the compiler three times, 177# then you can set this option to true. You shouldn't ever need to set this 178# option to true. 179#full-bootstrap = false 180 181# Enable a build of the extended rust tool set which is not only the compiler 182# but also tools such as Cargo. This will also produce "combined installers" 183# which are used to install Rust and Cargo together. This is disabled by 184# default. 185#extended = false 186 187# Installs chosen set of extended tools if enabled. By default builds all. 188# If chosen tool failed to build the installation fails. 189#tools = ["cargo", "rls", "clippy", "rustfmt", "analysis", "src"] 190 191# Verbosity level: 0 == not verbose, 1 == verbose, 2 == very verbose 192#verbose = 0 193 194# Build the sanitizer runtimes 195#sanitizers = false 196 197# Build the profiler runtime 198#profiler = false 199 200# Indicates whether the native libraries linked into Cargo will be statically 201# linked or not. 202#cargo-native-static = false 203 204# Run the build with low priority, by setting the process group's "nice" value 205# to +10 on Unix platforms, and by using a "low priority" job object on Windows. 206#low-priority = false 207 208# Arguments passed to the `./configure` script, used during distcheck. You 209# probably won't fill this in but rather it's filled in by the `./configure` 210# script. 211#configure-args = [] 212 213# Indicates that a local rebuild is occurring instead of a full bootstrap, 214# essentially skipping stage0 as the local compiler is recompiling itself again. 215#local-rebuild = false 216 217# Print out how long each rustbuild step took (mostly intended for CI and 218# tracking over time) 219#print-step-timings = false 220 221# ============================================================================= 222# General install configuration options 223# ============================================================================= 224[install] 225 226# Instead of installing to /usr/local, install to this path instead. 227#prefix = "/usr/local" 228 229# Where to install system configuration files 230# If this is a relative path, it will get installed in `prefix` above 231#sysconfdir = "/etc" 232 233# Where to install documentation in `prefix` above 234#docdir = "share/doc/rust" 235 236# Where to install binaries in `prefix` above 237#bindir = "bin" 238 239# Where to install libraries in `prefix` above 240#libdir = "lib" 241 242# Where to install man pages in `prefix` above 243#mandir = "share/man" 244 245# Where to install data in `prefix` above (currently unused) 246#datadir = "share" 247 248# Where to install additional info in `prefix` above (currently unused) 249#infodir = "share/info" 250 251# Where to install local state (currently unused) 252# If this is a relative path, it will get installed in `prefix` above 253#localstatedir = "/var/lib" 254 255# ============================================================================= 256# Options for compiling Rust code itself 257# ============================================================================= 258[rust] 259 260# Whether or not to optimize the compiler and standard library. 261# WARNING: Building with optimize = false is NOT SUPPORTED. Due to bootstrapping, 262# building without optimizations takes much longer than optimizing. Further, some platforms 263# fail to build without this optimization (c.f. #65352). 264#optimize = true 265 266# Indicates that the build should be configured for debugging Rust. A 267# `debug`-enabled compiler and standard library will be somewhat 268# slower (due to e.g. checking of debug assertions) but should remain 269# usable. 270# 271# Note: If this value is set to `true`, it will affect a number of 272# configuration options below as well, if they have been left 273# unconfigured in this file. 274# 275# Note: changes to the `debug` setting do *not* affect `optimize` 276# above. In theory, a "maximally debuggable" environment would 277# set `optimize` to `false` above to assist the introspection 278# facilities of debuggers like lldb and gdb. To recreate such an 279# environment, explicitly set `optimize` to `false` and `debug` 280# to `true`. In practice, everyone leaves `optimize` set to 281# `true`, because an unoptimized rustc with debugging 282# enabled becomes *unusably slow* (e.g. rust-lang/rust#24840 283# reported a 25x slowdown) and bootstrapping the supposed 284# "maximally debuggable" environment (notably libstd) takes 285# hours to build. 286# 287#debug = false 288 289# Number of codegen units to use for each compiler invocation. A value of 0 290# means "the number of cores on this machine", and 1+ is passed through to the 291# compiler. 292#codegen-units = 1 293 294# Sets the number of codegen units to build the standard library with, 295# regardless of what the codegen-unit setting for the rest of the compiler is. 296#codegen-units-std = 1 297 298# Whether or not debug assertions are enabled for the compiler and standard 299# library. 300#debug-assertions = false 301 302# Debuginfo level for most of Rust code, corresponds to the `-C debuginfo=N` option of `rustc`. 303# `0` - no debug info 304# `1` - line tables only 305# `2` - full debug info with variable and type information 306# Can be overriden for specific subsets of Rust code (rustc, std or tools). 307# Debuginfo for tests run with compiletest is not controlled by this option 308# and needs to be enabled separately with `debuginfo-level-tests`. 309#debuginfo-level = if debug { 2 } else { 0 } 310 311# Debuginfo level for the compiler. 312#debuginfo-level-rustc = debuginfo-level 313 314# Debuginfo level for the standard library. 315#debuginfo-level-std = debuginfo-level 316 317# Debuginfo level for the tools. 318#debuginfo-level-tools = debuginfo-level 319 320# Debuginfo level for the test suites run with compiletest. 321# FIXME(#61117): Some tests fail when this option is enabled. 322#debuginfo-level-tests = 0 323 324# Whether or not `panic!`s generate backtraces (RUST_BACKTRACE) 325#backtrace = true 326 327# Whether to always use incremental compilation when building rustc 328#incremental = false 329 330# Build a multi-threaded rustc 331#parallel-compiler = false 332 333# The default linker that will be hard-coded into the generated compiler for 334# targets that don't specify linker explicitly in their target specifications. 335# Note that this is not the linker used to link said compiler. 336#default-linker = "cc" 337 338# The "channel" for the Rust build to produce. The stable/beta channels only 339# allow using stable features, whereas the nightly and dev channels allow using 340# nightly features 341#channel = "dev" 342 343# The root location of the MUSL installation directory. 344#musl-root = "..." 345 346# By default the `rustc` executable is built with `-Wl,-rpath` flags on Unix 347# platforms to ensure that the compiler is usable by default from the build 348# directory (as it links to a number of dynamic libraries). This may not be 349# desired in distributions, for example. 350#rpath = true 351 352# Emits extraneous output from tests to ensure that failures of the test 353# harness are debuggable just from logfiles. 354#verbose-tests = false 355 356# Flag indicating whether tests are compiled with optimizations (the -O flag). 357#optimize-tests = true 358 359# Flag indicating whether codegen tests will be run or not. If you get an error 360# saying that the FileCheck executable is missing, you may want to disable this. 361# Also see the target's llvm-filecheck option. 362#codegen-tests = true 363 364# Flag indicating whether git info will be retrieved from .git automatically. 365# Having the git information can cause a lot of rebuilds during development. 366# Note: If this attribute is not explicitly set (e.g. if left commented out) it 367# will default to true if channel = "dev", but will default to false otherwise. 368#ignore-git = true 369 370# When creating source tarballs whether or not to create a source tarball. 371#dist-src = false 372 373# After building or testing extended tools (e.g. clippy and rustfmt), append the 374# result (broken, compiling, testing) into this JSON file. 375#save-toolstates = "/path/to/toolstates.json" 376 377# This is an array of the codegen backends that will be compiled for the rustc 378# that's being compiled. The default is to only build the LLVM codegen backend, 379# and currently the only standard option supported is `"llvm"` 380#codegen-backends = ["llvm"] 381 382# Indicates whether LLD will be compiled and made available in the sysroot for 383# rustc to execute. 384#lld = false 385 386# Indicates whether some LLVM tools, like llvm-objdump, will be made available in the 387# sysroot. 388#llvm-tools = false 389 390# Indicates whether LLDB will be made available in the sysroot. 391# This is only built if LLVM is also being built. 392#lldb = false 393 394# Whether to deny warnings in crates 395#deny-warnings = true 396 397# Print backtrace on internal compiler errors during bootstrap 398#backtrace-on-ice = false 399 400# Whether to verify generated LLVM IR 401#verify-llvm-ir = false 402 403# Map all debuginfo paths for libstd and crates to `/rust/$sha/$crate/...`, 404# generally only set for releases 405#remap-debuginfo = false 406 407# Link the compiler against `jemalloc`, where on Linux and OSX it should 408# override the default allocator for rustc and LLVM. 409#jemalloc = false 410 411# Run tests in various test suites with the "nll compare mode" in addition to 412# running the tests in normal mode. Largely only used on CI and during local 413# development of NLL 414#test-compare-mode = false 415 416# Use LLVM libunwind as the implementation for Rust's unwinder. 417#llvm-libunwind = false 418 419# ============================================================================= 420# Options for specific targets 421# 422# Each of the following options is scoped to the specific target triple in 423# question and is used for determining how to compile each target. 424# ============================================================================= 425[target.x86_64-unknown-linux-gnu] 426 427# C compiler to be used to compiler C code. Note that the 428# default value is platform specific, and if not specified it may also depend on 429# what platform is crossing to what platform. 430#cc = "cc" 431 432# C++ compiler to be used to compiler C++ code (e.g. LLVM and our LLVM shims). 433# This is only used for host targets. 434#cxx = "c++" 435 436# Archiver to be used to assemble static libraries compiled from C/C++ code. 437# Note: an absolute path should be used, otherwise LLVM build will break. 438#ar = "ar" 439 440# Ranlib to be used to assemble static libraries compiled from C/C++ code. 441# Note: an absolute path should be used, otherwise LLVM build will break. 442#ranlib = "ranlib" 443 444# Linker to be used to link Rust code. Note that the 445# default value is platform specific, and if not specified it may also depend on 446# what platform is crossing to what platform. 447#linker = "cc" 448 449# Path to the `llvm-config` binary of the installation of a custom LLVM to link 450# against. Note that if this is specified we don't compile LLVM at all for this 451# target. 452#llvm-config = "../path/to/llvm/root/bin/llvm-config" 453 454# Normally the build system can find LLVM's FileCheck utility, but if 455# not, you can specify an explicit file name for it. 456#llvm-filecheck = "/path/to/FileCheck" 457 458# If this target is for Android, this option will be required to specify where 459# the NDK for the target lives. This is used to find the C compiler to link and 460# build native code. 461#android-ndk = "/path/to/ndk" 462 463# Force static or dynamic linkage of the standard library for this target. If 464# this target is a host for rustc, this will also affect the linkage of the 465# compiler itself. This is useful for building rustc on targets that normally 466# only use static libraries. If unset, the target's default linkage is used. 467#crt-static = false 468 469# The root location of the MUSL installation directory. The library directory 470# will also need to contain libunwind.a for an unwinding implementation. Note 471# that this option only makes sense for MUSL targets that produce statically 472# linked binaries 473#musl-root = "..." 474 475# The root location of the `wasm32-wasi` sysroot. 476#wasi-root = "..." 477 478# Used in testing for configuring where the QEMU images are located, you 479# probably don't want to use this. 480#qemu-rootfs = "..." 481 482# ============================================================================= 483# Distribution options 484# 485# These options are related to distribution, mostly for the Rust project itself. 486# You probably won't need to concern yourself with any of these options 487# ============================================================================= 488[dist] 489 490# This is the folder of artifacts that the build system will sign. All files in 491# this directory will be signed with the default gpg key using the system `gpg` 492# binary. The `asc` and `sha256` files will all be output into the standard dist 493# output folder (currently `build/dist`) 494# 495# This folder should be populated ahead of time before the build system is 496# invoked. 497#sign-folder = "path/to/folder/to/sign" 498 499# This is a file which contains the password of the default gpg key. This will 500# be passed to `gpg` down the road when signing all files in `sign-folder` 501# above. This should be stored in plaintext. 502#gpg-password-file = "path/to/gpg/password" 503 504# The remote address that all artifacts will eventually be uploaded to. The 505# build system generates manifests which will point to these urls, and for the 506# manifests to be correct they'll have to have the right URLs encoded. 507# 508# Note that this address should not contain a trailing slash as file names will 509# be appended to it. 510#upload-addr = "https://example.com/folder" 511 512# Whether to build a plain source tarball to upload 513# We disable that on Windows not to override the one already uploaded on S3 514# as the one built on Windows will contain backslashes in paths causing problems 515# on linux 516#src-tarball = true 517# 518 519# Whether to allow failures when building tools 520#missing-tools = false