fork/rust
git clone https://git.julia.blue/fork/rust
4fb7144ed15
1.43.0
1# Sample TOML configuration file for building Rust. 2# 3# To configure rustbuild, copy this file to the directory from which you will be 4# running the build, and name it config.toml. 5# 6# All options are commented out by default in this file, and they're commented 7# out with their default values. The build system by default looks for 8# `config.toml` in the current directory of a build for build configuration, but 9# a custom configuration file can also be specified with `--config` to the build 10# system. 11 12# ============================================================================= 13# Tweaking how LLVM is compiled 14# ============================================================================= 15[llvm] 16 17# Indicates whether LLVM rebuild should be skipped when running bootstrap. If 18# this is `false` then the compiler's LLVM will be rebuilt whenever the built 19# version doesn't have the correct hash. If it is `true` then LLVM will never 20# be rebuilt. The default value is `false`. 21#skip-rebuild = false 22 23# Indicates whether the LLVM build is a Release or Debug build 24#optimize = true 25 26# Indicates whether LLVM should be built with ThinLTO. Note that this will 27# only succeed if you use clang, lld, llvm-ar, and llvm-ranlib in your C/C++ 28# toolchain (see the `cc`, `cxx`, `linker`, `ar`, and `ranlib` options below). 29# More info at: https://clang.llvm.org/docs/ThinLTO.html#clang-bootstrap 30#thin-lto = false 31 32# Indicates whether an LLVM Release build should include debug info 33#release-debuginfo = false 34 35# Indicates whether the LLVM assertions are enabled or not 36#assertions = false 37 38# Indicates whether ccache is used when building LLVM 39#ccache = false 40# or alternatively ... 41#ccache = "/path/to/ccache" 42 43# If an external LLVM root is specified, we automatically check the version by 44# default to make sure it's within the range that we're expecting, but setting 45# this flag will indicate that this version check should not be done. 46#version-check = true 47 48# Link libstdc++ statically into the librustc_llvm instead of relying on a 49# dynamic version to be available. 50#static-libstdcpp = false 51 52# Tell the LLVM build system to use Ninja instead of the platform default for 53# the generated build system. This can sometimes be faster than make, for 54# example. 55#ninja = false 56 57# LLVM targets to build support for. 58# Note: this is NOT related to Rust compilation targets. However, as Rust is 59# dependent on LLVM for code generation, turning targets off here WILL lead to 60# the resulting rustc being unable to compile for the disabled architectures. 61# Also worth pointing out is that, in case support for new targets are added to 62# LLVM, enabling them here doesn't mean Rust is automatically gaining said 63# support. You'll need to write a target specification at least, and most 64# likely, teach rustc about the C ABI of the target. Get in touch with the 65# Rust team and file an issue if you need assistance in porting! 66#targets = "AArch64;ARM;Hexagon;MSP430;Mips;NVPTX;PowerPC;RISCV;Sparc;SystemZ;WebAssembly;X86" 67 68# LLVM experimental targets to build support for. These targets are specified in 69# the same format as above, but since these targets are experimental, they are 70# not built by default and the experimental Rust compilation targets that depend 71# on them will not work unless the user opts in to building them. 72#experimental-targets = "" 73 74# Cap the number of parallel linker invocations when compiling LLVM. 75# This can be useful when building LLVM with debug info, which significantly 76# increases the size of binaries and consequently the memory required by 77# each linker process. 78# If absent or 0, linker invocations are treated like any other job and 79# controlled by rustbuild's -j parameter. 80#link-jobs = 0 81 82# When invoking `llvm-config` this configures whether the `--shared` argument is 83# passed to prefer linking to shared libraries. 84#link-shared = false 85 86# When building llvm, this configures what is being appended to the version. 87# If absent, we let the version as-is. 88#version-suffix = "-rust" 89 90# On MSVC you can compile LLVM with clang-cl, but the test suite doesn't pass 91# with clang-cl, so this is special in that it only compiles LLVM with clang-cl 92#clang-cl = '/path/to/clang-cl.exe' 93 94# Pass extra compiler and linker flags to the LLVM CMake build. 95#cflags = "-fextra-flag" 96#cxxflags = "-fextra-flag" 97#ldflags = "-Wl,extra-flag" 98 99# Use libc++ when building LLVM instead of libstdc++. This is the default on 100# platforms already use libc++ as the default C++ library, but this option 101# allows you to use libc++ even on platforms when it's not. You need to ensure 102# that your host compiler ships with libc++. 103#use-libcxx = true 104 105# The value specified here will be passed as `-DLLVM_USE_LINKER` to CMake. 106#use-linker = "lld" 107 108# Whether or not to specify `-DLLVM_TEMPORARILY_ALLOW_OLD_TOOLCHAIN=YES` 109#allow-old-toolchain = false 110 111# ============================================================================= 112# General build configuration options 113# ============================================================================= 114[build] 115 116# Build triple for the original snapshot compiler. This must be a compiler that 117# nightlies are already produced for. The current platform must be able to run 118# binaries of this build triple and the nightly will be used to bootstrap the 119# first compiler. 120#build = "x86_64-unknown-linux-gnu" # defaults to your host platform 121 122# In addition to the build triple, other triples to produce full compiler 123# toolchains for. Each of these triples will be bootstrapped from the build 124# triple and then will continue to bootstrap themselves. This platform must 125# currently be able to run all of the triples provided here. 126#host = ["x86_64-unknown-linux-gnu"] # defaults to just the build triple 127 128# In addition to all host triples, other triples to produce the standard library 129# for. Each host triple will be used to produce a copy of the standard library 130# for each target triple. 131#target = ["x86_64-unknown-linux-gnu"] # defaults to just the build triple 132 133# Instead of downloading the src/stage0.txt version of Cargo specified, use 134# this Cargo binary instead to build all Rust code 135#cargo = "/path/to/bin/cargo" 136 137# Instead of downloading the src/stage0.txt version of the compiler 138# specified, use this rustc binary instead as the stage0 snapshot compiler. 139#rustc = "/path/to/bin/rustc" 140 141# Instead of download the src/stage0.txt version of rustfmt specified, 142# use this rustfmt binary instead as the stage0 snapshot rustfmt. 143#rustfmt = "/path/to/bin/rustfmt" 144 145# Flag to specify whether any documentation is built. If false, rustdoc and 146# friends will still be compiled but they will not be used to generate any 147# documentation. 148#docs = true 149 150# Indicate whether the compiler should be documented in addition to the standard 151# library and facade crates. 152#compiler-docs = false 153 154# Indicate whether git submodules are managed and updated automatically. 155#submodules = true 156 157# Update git submodules only when the checked out commit in the submodules differs 158# from what is committed in the main rustc repo. 159#fast-submodules = true 160 161# The path to (or name of) the GDB executable to use. This is only used for 162# executing the debuginfo test suite. 163#gdb = "gdb" 164 165# The node.js executable to use. Note that this is only used for the emscripten 166# target when running tests, otherwise this can be omitted. 167#nodejs = "node" 168 169# Python interpreter to use for various tasks throughout the build, notably 170# rustdoc tests, the lldb python interpreter, and some dist bits and pieces. 171# Note that Python 2 is currently required. 172# 173# Defaults to python2.7, then python2. If neither executable can be found, then 174# it defaults to the Python interpreter used to execute x.py. 175#python = "python2.7" 176 177# Force Cargo to check that Cargo.lock describes the precise dependency 178# set that all the Cargo.toml files create, instead of updating it. 179#locked-deps = false 180 181# Indicate whether the vendored sources are used for Rust dependencies or not 182#vendor = false 183 184# Typically the build system will build the Rust compiler twice. The second 185# compiler, however, will simply use its own libraries to link against. If you 186# would rather to perform a full bootstrap, compiling the compiler three times, 187# then you can set this option to true. You shouldn't ever need to set this 188# option to true. 189#full-bootstrap = false 190 191# Enable a build of the extended Rust tool set which is not only the compiler 192# but also tools such as Cargo. This will also produce "combined installers" 193# which are used to install Rust and Cargo together. This is disabled by 194# default. The `tools` option (immediately below) specifies which tools should 195# be built if `extended = true`. 196#extended = false 197 198# Installs chosen set of extended tools if `extended = true`. By default builds all. 199# If chosen tool failed to build the installation fails. If `extended = false`, this 200# option is ignored. 201#tools = ["cargo", "rls", "clippy", "rustfmt", "analysis", "src"] 202 203# Verbosity level: 0 == not verbose, 1 == verbose, 2 == very verbose 204#verbose = 0 205 206# Build the sanitizer runtimes 207#sanitizers = false 208 209# Build the profiler runtime 210#profiler = false 211 212# Indicates whether the native libraries linked into Cargo will be statically 213# linked or not. 214#cargo-native-static = false 215 216# Run the build with low priority, by setting the process group's "nice" value 217# to +10 on Unix platforms, and by using a "low priority" job object on Windows. 218#low-priority = false 219 220# Arguments passed to the `./configure` script, used during distcheck. You 221# probably won't fill this in but rather it's filled in by the `./configure` 222# script. 223#configure-args = [] 224 225# Indicates that a local rebuild is occurring instead of a full bootstrap, 226# essentially skipping stage0 as the local compiler is recompiling itself again. 227#local-rebuild = false 228 229# Print out how long each rustbuild step took (mostly intended for CI and 230# tracking over time) 231#print-step-timings = false 232 233# ============================================================================= 234# General install configuration options 235# ============================================================================= 236[install] 237 238# Instead of installing to /usr/local, install to this path instead. 239#prefix = "/usr/local" 240 241# Where to install system configuration files 242# If this is a relative path, it will get installed in `prefix` above 243#sysconfdir = "/etc" 244 245# Where to install documentation in `prefix` above 246#docdir = "share/doc/rust" 247 248# Where to install binaries in `prefix` above 249#bindir = "bin" 250 251# Where to install libraries in `prefix` above 252#libdir = "lib" 253 254# Where to install man pages in `prefix` above 255#mandir = "share/man" 256 257# Where to install data in `prefix` above (currently unused) 258#datadir = "share" 259 260# Where to install additional info in `prefix` above (currently unused) 261#infodir = "share/info" 262 263# Where to install local state (currently unused) 264# If this is a relative path, it will get installed in `prefix` above 265#localstatedir = "/var/lib" 266 267# ============================================================================= 268# Options for compiling Rust code itself 269# ============================================================================= 270[rust] 271 272# Whether or not to optimize the compiler and standard library. 273# WARNING: Building with optimize = false is NOT SUPPORTED. Due to bootstrapping, 274# building without optimizations takes much longer than optimizing. Further, some platforms 275# fail to build without this optimization (c.f. #65352). 276#optimize = true 277 278# Indicates that the build should be configured for debugging Rust. A 279# `debug`-enabled compiler and standard library will be somewhat 280# slower (due to e.g. checking of debug assertions) but should remain 281# usable. 282# 283# Note: If this value is set to `true`, it will affect a number of 284# configuration options below as well, if they have been left 285# unconfigured in this file. 286# 287# Note: changes to the `debug` setting do *not* affect `optimize` 288# above. In theory, a "maximally debuggable" environment would 289# set `optimize` to `false` above to assist the introspection 290# facilities of debuggers like lldb and gdb. To recreate such an 291# environment, explicitly set `optimize` to `false` and `debug` 292# to `true`. In practice, everyone leaves `optimize` set to 293# `true`, because an unoptimized rustc with debugging 294# enabled becomes *unusably slow* (e.g. rust-lang/rust#24840 295# reported a 25x slowdown) and bootstrapping the supposed 296# "maximally debuggable" environment (notably libstd) takes 297# hours to build. 298# 299#debug = false 300 301# Number of codegen units to use for each compiler invocation. A value of 0 302# means "the number of cores on this machine", and 1+ is passed through to the 303# compiler. 304#codegen-units = 1 305 306# Sets the number of codegen units to build the standard library with, 307# regardless of what the codegen-unit setting for the rest of the compiler is. 308#codegen-units-std = 1 309 310# Whether or not debug assertions are enabled for the compiler and standard 311# library. 312#debug-assertions = false 313 314# Debuginfo level for most of Rust code, corresponds to the `-C debuginfo=N` option of `rustc`. 315# `0` - no debug info 316# `1` - line tables only 317# `2` - full debug info with variable and type information 318# Can be overridden for specific subsets of Rust code (rustc, std or tools). 319# Debuginfo for tests run with compiletest is not controlled by this option 320# and needs to be enabled separately with `debuginfo-level-tests`. 321#debuginfo-level = if debug { 2 } else { 0 } 322 323# Debuginfo level for the compiler. 324#debuginfo-level-rustc = debuginfo-level 325 326# Debuginfo level for the standard library. 327#debuginfo-level-std = debuginfo-level 328 329# Debuginfo level for the tools. 330#debuginfo-level-tools = debuginfo-level 331 332# Debuginfo level for the test suites run with compiletest. 333# FIXME(#61117): Some tests fail when this option is enabled. 334#debuginfo-level-tests = 0 335 336# Whether or not `panic!`s generate backtraces (RUST_BACKTRACE) 337#backtrace = true 338 339# Whether to always use incremental compilation when building rustc 340#incremental = false 341 342# Build a multi-threaded rustc 343#parallel-compiler = false 344 345# The default linker that will be hard-coded into the generated compiler for 346# targets that don't specify linker explicitly in their target specifications. 347# Note that this is not the linker used to link said compiler. 348#default-linker = "cc" 349 350# The "channel" for the Rust build to produce. The stable/beta channels only 351# allow using stable features, whereas the nightly and dev channels allow using 352# nightly features 353#channel = "dev" 354 355# The root location of the MUSL installation directory. 356#musl-root = "..." 357 358# By default the `rustc` executable is built with `-Wl,-rpath` flags on Unix 359# platforms to ensure that the compiler is usable by default from the build 360# directory (as it links to a number of dynamic libraries). This may not be 361# desired in distributions, for example. 362#rpath = true 363 364# Emits extraneous output from tests to ensure that failures of the test 365# harness are debuggable just from logfiles. 366#verbose-tests = false 367 368# Flag indicating whether tests are compiled with optimizations (the -O flag). 369#optimize-tests = true 370 371# Flag indicating whether codegen tests will be run or not. If you get an error 372# saying that the FileCheck executable is missing, you may want to disable this. 373# Also see the target's llvm-filecheck option. 374#codegen-tests = true 375 376# Flag indicating whether git info will be retrieved from .git automatically. 377# Having the git information can cause a lot of rebuilds during development. 378# Note: If this attribute is not explicitly set (e.g. if left commented out) it 379# will default to true if channel = "dev", but will default to false otherwise. 380#ignore-git = true 381 382# When creating source tarballs whether or not to create a source tarball. 383#dist-src = false 384 385# After building or testing extended tools (e.g. clippy and rustfmt), append the 386# result (broken, compiling, testing) into this JSON file. 387#save-toolstates = "/path/to/toolstates.json" 388 389# This is an array of the codegen backends that will be compiled for the rustc 390# that's being compiled. The default is to only build the LLVM codegen backend, 391# and currently the only standard option supported is `"llvm"` 392#codegen-backends = ["llvm"] 393 394# Indicates whether LLD will be compiled and made available in the sysroot for 395# rustc to execute. 396#lld = false 397 398# Indicates whether LLD will be used to link Rust crates during bootstrap on 399# supported platforms. The LLD from the bootstrap distribution will be used 400# and not the LLD compiled during the bootstrap. 401# 402# LLD will not be used if we're cross linking or running tests. 403# 404# Explicitly setting the linker for a target will override this option. 405#use-lld = false 406 407# Indicates whether some LLVM tools, like llvm-objdump, will be made available in the 408# sysroot. 409#llvm-tools = false 410 411# Indicates whether LLDB will be made available in the sysroot. 412# This is only built if LLVM is also being built. 413#lldb = false 414 415# Whether to deny warnings in crates 416#deny-warnings = true 417 418# Print backtrace on internal compiler errors during bootstrap 419#backtrace-on-ice = false 420 421# Whether to verify generated LLVM IR 422#verify-llvm-ir = false 423 424# Compile the compiler with a non-default ThinLTO import limit. This import 425# limit controls the maximum size of functions imported by ThinLTO. Decreasing 426# will make code compile faster at the expense of lower runtime performance. 427# If `incremental` is set to true above, the import limit will default to 10 428# instead of LLVM's default of 100. 429#thin-lto-import-instr-limit = 100 430 431# Map all debuginfo paths for libstd and crates to `/rust/$sha/$crate/...`, 432# generally only set for releases 433#remap-debuginfo = false 434 435# Link the compiler against `jemalloc`, where on Linux and OSX it should 436# override the default allocator for rustc and LLVM. 437#jemalloc = false 438 439# Run tests in various test suites with the "nll compare mode" in addition to 440# running the tests in normal mode. Largely only used on CI and during local 441# development of NLL 442#test-compare-mode = false 443 444# Use LLVM libunwind as the implementation for Rust's unwinder. 445#llvm-libunwind = false 446 447# Enable Windows Control Flow Guard checks in the standard library. 448# This only applies from stage 1 onwards, and only for Windows targets. 449#control-flow-guard = false 450 451# ============================================================================= 452# Options for specific targets 453# 454# Each of the following options is scoped to the specific target triple in 455# question and is used for determining how to compile each target. 456# ============================================================================= 457[target.x86_64-unknown-linux-gnu] 458 459# C compiler to be used to compiler C code. Note that the 460# default value is platform specific, and if not specified it may also depend on 461# what platform is crossing to what platform. 462#cc = "cc" 463 464# C++ compiler to be used to compiler C++ code (e.g. LLVM and our LLVM shims). 465# This is only used for host targets. 466#cxx = "c++" 467 468# Archiver to be used to assemble static libraries compiled from C/C++ code. 469# Note: an absolute path should be used, otherwise LLVM build will break. 470#ar = "ar" 471 472# Ranlib to be used to assemble static libraries compiled from C/C++ code. 473# Note: an absolute path should be used, otherwise LLVM build will break. 474#ranlib = "ranlib" 475 476# Linker to be used to link Rust code. Note that the 477# default value is platform specific, and if not specified it may also depend on 478# what platform is crossing to what platform. 479# Setting this will override the `use-lld` option for Rust code. 480#linker = "cc" 481 482# Path to the `llvm-config` binary of the installation of a custom LLVM to link 483# against. Note that if this is specified we don't compile LLVM at all for this 484# target. 485#llvm-config = "../path/to/llvm/root/bin/llvm-config" 486 487# Normally the build system can find LLVM's FileCheck utility, but if 488# not, you can specify an explicit file name for it. 489#llvm-filecheck = "/path/to/FileCheck" 490 491# If this target is for Android, this option will be required to specify where 492# the NDK for the target lives. This is used to find the C compiler to link and 493# build native code. 494#android-ndk = "/path/to/ndk" 495 496# Force static or dynamic linkage of the standard library for this target. If 497# this target is a host for rustc, this will also affect the linkage of the 498# compiler itself. This is useful for building rustc on targets that normally 499# only use static libraries. If unset, the target's default linkage is used. 500#crt-static = false 501 502# The root location of the MUSL installation directory. The library directory 503# will also need to contain libunwind.a for an unwinding implementation. Note 504# that this option only makes sense for MUSL targets that produce statically 505# linked binaries 506#musl-root = "..." 507 508# The root location of the `wasm32-wasi` sysroot. 509#wasi-root = "..." 510 511# Used in testing for configuring where the QEMU images are located, you 512# probably don't want to use this. 513#qemu-rootfs = "..." 514 515# ============================================================================= 516# Distribution options 517# 518# These options are related to distribution, mostly for the Rust project itself. 519# You probably won't need to concern yourself with any of these options 520# ============================================================================= 521[dist] 522 523# This is the folder of artifacts that the build system will sign. All files in 524# this directory will be signed with the default gpg key using the system `gpg` 525# binary. The `asc` and `sha256` files will all be output into the standard dist 526# output folder (currently `build/dist`) 527# 528# This folder should be populated ahead of time before the build system is 529# invoked. 530#sign-folder = "path/to/folder/to/sign" 531 532# This is a file which contains the password of the default gpg key. This will 533# be passed to `gpg` down the road when signing all files in `sign-folder` 534# above. This should be stored in plaintext. 535#gpg-password-file = "path/to/gpg/password" 536 537# The remote address that all artifacts will eventually be uploaded to. The 538# build system generates manifests which will point to these urls, and for the 539# manifests to be correct they'll have to have the right URLs encoded. 540# 541# Note that this address should not contain a trailing slash as file names will 542# be appended to it. 543#upload-addr = "https://example.com/folder" 544 545# Whether to build a plain source tarball to upload 546# We disable that on Windows not to override the one already uploaded on S3 547# as the one built on Windows will contain backslashes in paths causing problems 548# on linux 549#src-tarball = true 550# 551 552# Whether to allow failures when building tools 553#missing-tools = false