collab/igvc2018
git clone https://git.julia.blue/collab/igvc2018
d0862f2
documentation
files
| motor/ | |
| .gitignore | 6 B |
| CONTRIBUTE.md | 1.7 KiB |
| LICENSE | 1.1 KiB |
| README.md | 1.3 KiB |
IGVC
Welcome to the UT RAS IGVC repo. This file will give installation/usage instructions. If you want to develop on this repo see our contributing guide.
Setup
First you need to download and install ros by following these two guides:
- Install Kinetic (If you're on 17.04 you'll need to Install Lunar instead)
- Configure Environment
Then clone our repo into the src folder:
cd ~/catkin_ws/src git clone https://github.com/ut-ras/IGVC2018.git
It isn't necessary to run the codebase but if you want to be able to edit the code on the microcontroller, you'll need to install the Energia IDE
sudo apt install xboxdrv cd catkin_ws/src sudo apt install python-serial cd ~/catkin_ws/src git clone https://github.com/ros-drivers/rosserial.git cd .. catkin_make catkin_make install source install/setup.bash source devel/setup.bash
If you get Energia you'll need to build the libraries for it:
cd <sketches_dir>/libraries rosrun rosserial_tivac make_libraries_energia .
To check if it works, run the manual control launch file:
roslaunch motor manual.launch